@@ -34,6 +34,10 @@ enum {
PHYLINK_DISABLE_STOPPED,
PHYLINK_DISABLE_LINK,
PHYLINK_DISABLE_MAC_WOL,
+
+ PCS_STATE_DOWN = 0,
+ PCS_STATE_STARTING,
+ PCS_STATE_STARTED,
};
/**
@@ -72,6 +76,7 @@ struct phylink {
struct phylink_link_state phy_state;
struct work_struct resolve;
unsigned int pcs_neg_mode;
+ unsigned int pcs_state;
bool mac_link_dropped;
bool using_mac_select_pcs;
@@ -993,6 +998,22 @@ static void phylink_resolve_an_pause(struct phylink_link_state *state)
}
}
+static void phylink_pcs_disable(struct phylink_pcs *pcs)
+{
+ if (pcs && pcs->ops->pcs_disable)
+ pcs->ops->pcs_disable(pcs);
+}
+
+static int phylink_pcs_enable(struct phylink_pcs *pcs)
+{
+ int err = 0;
+
+ if (pcs && pcs->ops->pcs_enable)
+ err = pcs->ops->pcs_enable(pcs);
+
+ return err;
+}
+
static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
const struct phylink_link_state *state,
bool permit_pause_to_mac)
@@ -1095,11 +1116,17 @@ static void phylink_major_config(struct phylink *pl, bool restart,
/* If we have a new PCS, switch to the new PCS after preparing the MAC
* for the change.
*/
- if (pcs_changed)
+ if (pcs_changed) {
+ phylink_pcs_disable(pl->pcs);
+
pl->pcs = pcs;
+ }
phylink_mac_config(pl, state);
+ if (pl->pcs_state == PCS_STATE_STARTING || pcs_changed)
+ phylink_pcs_enable(pl->pcs);
+
neg_mode = pl->cur_link_an_mode;
if (pl->pcs && pl->pcs->neg_mode)
neg_mode = pl->pcs_neg_mode;
@@ -1586,6 +1613,7 @@ struct phylink *phylink_create(struct phylink_config *config,
pl->link_config.pause = MLO_PAUSE_AN;
pl->link_config.speed = SPEED_UNKNOWN;
pl->link_config.duplex = DUPLEX_UNKNOWN;
+ pl->pcs_state = PCS_STATE_DOWN;
pl->mac_ops = mac_ops;
__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
@@ -1987,6 +2015,8 @@ void phylink_start(struct phylink *pl)
if (pl->netdev)
netif_carrier_off(pl->netdev);
+ pl->pcs_state = PCS_STATE_STARTING;
+
/* Apply the link configuration to the MAC when starting. This allows
* a fixed-link to start with the correct parameters, and also
* ensures that we set the appropriate advertisement for Serdes links.
@@ -1997,6 +2027,8 @@ void phylink_start(struct phylink *pl)
*/
phylink_mac_initial_config(pl, true);
+ pl->pcs_state = PCS_STATE_STARTED;
+
phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED);
if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
@@ -2015,15 +2047,9 @@ void phylink_start(struct phylink *pl)
poll = true;
}
- switch (pl->cfg_link_an_mode) {
- case MLO_AN_FIXED:
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED)
poll |= pl->config->poll_fixed_state;
- break;
- case MLO_AN_INBAND:
- if (pl->pcs)
- poll |= pl->pcs->poll;
- break;
- }
+
if (poll)
mod_timer(&pl->link_poll, jiffies + HZ);
if (pl->phydev)
@@ -2060,6 +2086,10 @@ void phylink_stop(struct phylink *pl)
}
phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
+
+ pl->pcs_state = PCS_STATE_DOWN;
+
+ phylink_pcs_disable(pl->pcs);
}
EXPORT_SYMBOL_GPL(phylink_stop);
@@ -533,6 +533,8 @@ struct phylink_pcs {
/**
* struct phylink_pcs_ops - MAC PCS operations structure.
* @pcs_validate: validate the link configuration.
+ * @pcs_enable: enable the PCS.
+ * @pcs_disable: disable the PCS.
* @pcs_get_state: read the current MAC PCS link state from the hardware.
* @pcs_config: configure the MAC PCS for the selected mode and state.
* @pcs_an_restart: restart 802.3z BaseX autonegotiation.
@@ -542,6 +544,8 @@ struct phylink_pcs {
struct phylink_pcs_ops {
int (*pcs_validate)(struct phylink_pcs *pcs, unsigned long *supported,
const struct phylink_link_state *state);
+ int (*pcs_enable)(struct phylink_pcs *pcs);
+ void (*pcs_disable)(struct phylink_pcs *pcs);
void (*pcs_get_state)(struct phylink_pcs *pcs,
struct phylink_link_state *state);
int (*pcs_config)(struct phylink_pcs *pcs, unsigned int neg_mode,
@@ -571,6 +575,18 @@ struct phylink_pcs_ops {
int pcs_validate(struct phylink_pcs *pcs, unsigned long *supported,
const struct phylink_link_state *state);
+/**
+ * pcs_enable() - enable the PCS.
+ * @pcs: a pointer to a &struct phylink_pcs.
+ */
+int pcs_enable(struct phylink_pcs *pcs);
+
+/**
+ * pcs_disable() - disable the PCS.
+ * @pcs: a pointer to a &struct phylink_pcs.
+ */
+void pcs_disable(struct phylink_pcs *pcs);
+
/**
* pcs_get_state() - Read the current inband link state from the hardware
* @pcs: a pointer to a &struct phylink_pcs.
Add phylink PCS enable/disable callbacks that will allow us to place IEEE 802.3 register compliant PCS in power-down mode while not being used. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/phylink.c | 48 +++++++++++++++++++++++++++++++-------- include/linux/phylink.h | 16 +++++++++++++ 2 files changed, 55 insertions(+), 9 deletions(-)