@@ -200,6 +200,13 @@ this documentation.
when the in-band link state changes - otherwise the link will never
come up.
+ The :c:func:`mac_get_caps` method is optional, and if provided should
+ return the phylink MAC capabilities that are supported for the passed
+ ``interface`` mode. In general, there is no need to implement this method.
+ Phylink will use these capabilities in combination with permissible
+ capabilities for ``interface`` to determine the allowable ethtool link
+ modes.
+
The :c:func:`validate` method should mask the supplied supported mask,
and ``state->advertising`` with the supported ethtool link modes.
These are the new ethtool link modes, so bitmask operations must be
@@ -657,6 +657,7 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
unsigned long *supported,
struct phylink_link_state *state)
{
+ unsigned long capabilities;
struct phylink_pcs *pcs;
int ret;
@@ -696,10 +697,17 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
}
/* Then validate the link parameters with the MAC */
- if (pl->mac_ops->validate)
+ if (pl->mac_ops->validate) {
pl->mac_ops->validate(pl->config, supported, state);
- else
- phylink_generic_validate(pl->config, supported, state);
+ } else {
+ if (pl->mac_ops->mac_get_caps)
+ capabilities = pl->mac_ops->mac_get_caps(pl->config,
+ state->interface);
+ else
+ capabilities = pl->config->mac_capabilities;
+
+ phylink_validate_mask_caps(supported, state, capabilities);
+ }
return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
}
@@ -228,6 +228,7 @@ void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
/**
* struct phylink_mac_ops - MAC operations structure.
* @validate: Validate and update the link configuration.
+ * @mac_get_caps: Get MAC capabilities for interface mode.
* @mac_select_pcs: Select a PCS for the interface mode.
* @mac_prepare: prepare for a major reconfiguration of the interface.
* @mac_config: configure the MAC for the selected mode and state.
@@ -241,6 +242,8 @@ struct phylink_mac_ops {
void (*validate)(struct phylink_config *config,
unsigned long *supported,
struct phylink_link_state *state);
+ unsigned long (*mac_get_caps)(struct phylink_config *config,
+ phy_interface_t interface);
struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config,
phy_interface_t interface);
int (*mac_prepare)(struct phylink_config *config, unsigned int mode,
@@ -292,6 +295,18 @@ struct phylink_mac_ops {
*/
void validate(struct phylink_config *config, unsigned long *supported,
struct phylink_link_state *state);
+/**
+ * mac_get_caps: Get MAC capabilities for interface mode.
+ * @config: a pointer to a &struct phylink_config.
+ * @interface: PHY interface mode.
+ *
+ * Optional method. When not provided, config->mac_capabilities will be used.
+ * When implemented, this returns the MAC capabilities for the specified
+ * interface mode where there is some special handling required by the MAC
+ * driver (e.g. not supporting half-duplex in certain interface modes.)
+ */
+unsigned long mac_get_caps(struct phylink_config *config,
+ phy_interface_t interface);
/**
* mac_select_pcs: Select a PCS for the interface mode.
* @config: a pointer to a &struct phylink_config.
Provide a new method, mac_get_caps() to get the MAC capabilities for the specified interface mode. This is for MACs which have special requirements, such as not supporting half-duplex in certain interface modes, and will replace the validate() method. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- Documentation/networking/sfp-phylink.rst | 7 +++++++ drivers/net/phy/phylink.c | 14 +++++++++++--- include/linux/phylink.h | 15 +++++++++++++++ 3 files changed, 33 insertions(+), 3 deletions(-)