@@ -1074,6 +1074,72 @@ static void phylink_pcs_an_restart(struct phylink *pl)
pl->pcs->ops->pcs_an_restart(pl->pcs);
}
+/**
+ * phylink_pcs_neg_mode() - helper to determine PCS inband mode
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @interface: interface mode to be used
+ * @advertising: adertisement ethtool link mode mask
+ *
+ * Determines the negotiation mode to be used by the PCS, and returns
+ * one of:
+ *
+ * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband
+ * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY)
+ * will be used.
+ * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg
+ * disabled
+ * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled
+ *
+ * Note: this is for cases where the PCS itself is involved in negotiation
+ * (e.g. Clause 37, SGMII and similar) not Clause 73.
+ */
+static unsigned int phylink_pcs_neg_mode(unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising)
+{
+ unsigned int neg_mode;
+
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ case PHY_INTERFACE_MODE_QUSGMII:
+ case PHY_INTERFACE_MODE_USXGMII:
+ /* These protocols are designed for use with a PHY which
+ * communicates its negotiation result back to the MAC via
+ * inband communication. Note: there exist PHYs that run
+ * with SGMII but do not send the inband data.
+ */
+ if (!phylink_autoneg_inband(mode))
+ neg_mode = PHYLINK_PCS_NEG_OUTBAND;
+ else
+ neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
+ break;
+
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ /* 1000base-X is designed for use media-side for Fibre
+ * connections, and thus the Autoneg bit needs to be
+ * taken into account. We also do this for 2500base-X
+ * as well, but drivers may not support this, so may
+ * need to override this.
+ */
+ if (!phylink_autoneg_inband(mode))
+ neg_mode = PHYLINK_PCS_NEG_OUTBAND;
+ else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ advertising))
+ neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
+ else
+ neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED;
+ break;
+
+ default:
+ neg_mode = PHYLINK_PCS_NEG_NONE;
+ break;
+ }
+
+ return neg_mode;
+}
+
static void phylink_major_config(struct phylink *pl, bool restart,
const struct phylink_link_state *state)
{
@@ -98,72 +98,6 @@ static inline bool phylink_autoneg_inband(unsigned int mode)
return mode == MLO_AN_INBAND;
}
-/**
- * phylink_pcs_neg_mode() - helper to determine PCS inband mode
- * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
- * @interface: interface mode to be used
- * @advertising: adertisement ethtool link mode mask
- *
- * Determines the negotiation mode to be used by the PCS, and returns
- * one of:
- *
- * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband
- * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY)
- * will be used.
- * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg
- * disabled
- * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled
- *
- * Note: this is for cases where the PCS itself is involved in negotiation
- * (e.g. Clause 37, SGMII and similar) not Clause 73.
- */
-static inline unsigned int phylink_pcs_neg_mode(unsigned int mode,
- phy_interface_t interface,
- const unsigned long *advertising)
-{
- unsigned int neg_mode;
-
- switch (interface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_QSGMII:
- case PHY_INTERFACE_MODE_QUSGMII:
- case PHY_INTERFACE_MODE_USXGMII:
- /* These protocols are designed for use with a PHY which
- * communicates its negotiation result back to the MAC via
- * inband communication. Note: there exist PHYs that run
- * with SGMII but do not send the inband data.
- */
- if (!phylink_autoneg_inband(mode))
- neg_mode = PHYLINK_PCS_NEG_OUTBAND;
- else
- neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
- break;
-
- case PHY_INTERFACE_MODE_1000BASEX:
- case PHY_INTERFACE_MODE_2500BASEX:
- /* 1000base-X is designed for use media-side for Fibre
- * connections, and thus the Autoneg bit needs to be
- * taken into account. We also do this for 2500base-X
- * as well, but drivers may not support this, so may
- * need to override this.
- */
- if (!phylink_autoneg_inband(mode))
- neg_mode = PHYLINK_PCS_NEG_OUTBAND;
- else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
- advertising))
- neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
- else
- neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED;
- break;
-
- default:
- neg_mode = PHYLINK_PCS_NEG_NONE;
- break;
- }
-
- return neg_mode;
-}
-
/**
* struct phylink_link_state - link state structure
* @advertising: ethtool bitmask containing advertised link modes
Move phylink_pcs_neg_mode() from the header file into the .c file since nothing should be using it. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- While it is true that there have been no users of this outside phylink.c since shortly after it was merged, leaving it in phylink.h provides a way to migrate code in e.g. OpenWRT. Since 6.6 was a LTS, let's now move the function for 6.8. --- drivers/net/phy/phylink.c | 66 +++++++++++++++++++++++++++++++++++++++ include/linux/phylink.h | 66 --------------------------------------- 2 files changed, 66 insertions(+), 66 deletions(-)