diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 9e02e4367bec..364d038da7ea 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -481,6 +481,11 @@
 #define MVPP22_GMAC_INT_SUM_MASK		0xa4
 #define     MVPP22_GMAC_INT_SUM_MASK_LINK_STAT	BIT(1)
 #define	    MVPP22_GMAC_INT_SUM_MASK_PTP	BIT(2)
+#define MVPP2_GMAC_LPI_CTRL0			0xc0
+#define     MVPP2_GMAC_LPI_CTRL0_TS_MASK	GENMASK(8, 8)
+#define MVPP2_GMAC_LPI_CTRL1			0xc4
+#define     MVPP2_GMAC_LPI_CTRL1_REQ_EN		BIT(0)
+#define     MVPP2_GMAC_LPI_CTRL1_TW_MASK	GENMASK(15, 4)
 
 /* Per-port XGMAC registers. PPv2.2 and PPv2.3, only for GOP port 0,
  * relative to port->base.
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index f85229a30844..a8c33417bb3e 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5757,6 +5757,28 @@ static int mvpp2_ethtool_set_rxfh(struct net_device *dev,
 	return mvpp2_modify_rxfh_context(dev, NULL, rxfh, extack);
 }
 
+static int mvpp2_ethtool_get_eee(struct net_device *dev,
+				 struct ethtool_keee *eee)
+{
+	struct mvpp2_port *port = netdev_priv(dev);
+
+	if (!port->phylink)
+		return -EOPNOTSUPP;
+
+	return phylink_ethtool_get_eee(port->phylink, eee);
+}
+
+static int mvpp2_ethtool_set_eee(struct net_device *dev,
+				 struct ethtool_keee *eee)
+{
+	struct mvpp2_port *port = netdev_priv(dev);
+
+	if (!port->phylink)
+		return -EOPNOTSUPP;
+
+	return phylink_ethtool_set_eee(port->phylink, eee);
+}
+
 /* Device ops */
 
 static const struct net_device_ops mvpp2_netdev_ops = {
@@ -5802,6 +5824,8 @@ static const struct ethtool_ops mvpp2_eth_tool_ops = {
 	.create_rxfh_context	= mvpp2_create_rxfh_context,
 	.modify_rxfh_context	= mvpp2_modify_rxfh_context,
 	.remove_rxfh_context	= mvpp2_remove_rxfh_context,
+	.get_eee		= mvpp2_ethtool_get_eee,
+	.set_eee		= mvpp2_ethtool_set_eee,
 };
 
 /* Used for PPv2.1, or PPv2.2 with the old Device Tree binding that
@@ -6672,6 +6696,55 @@ static void mvpp2_mac_link_down(struct phylink_config *config,
 	mvpp2_port_disable(port);
 }
 
+static void mvpp2_mac_disable_tx_lpi(struct phylink_config *config)
+{
+	struct mvpp2_port *port = mvpp2_phylink_to_port(config);
+
+	mvpp2_modify(port->base + MVPP2_GMAC_LPI_CTRL1,
+		     MVPP2_GMAC_LPI_CTRL1_REQ_EN, 0);
+}
+
+static int mvpp2_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
+				   bool tx_clk_stop)
+{
+	struct mvpp2_port *port = mvpp2_phylink_to_port(config);
+	u32 ts, tw, lpi1, status;
+
+	status = readl(port->base + MVPP2_GMAC_STATUS0);
+	if (status & MVPP2_GMAC_STATUS0_GMII_SPEED) {
+		/* At 1G speeds, the timer resolution are 1us, and
+		 * 802.3 says tw is 16.5us. Round up to 17us.
+		 */
+		tw = 17;
+		ts = timer;
+	} else {
+		/* At 100M speeds, the timer resolutions are 10us, and
+		 * 802.3 says tw is 30us.
+		 */
+		tw = 3;
+		ts = DIV_ROUND_UP(timer, 10);
+	}
+
+	if (ts > 255)
+		ts = 255;
+
+	/* Configure ts */
+	mvpp2_modify(port->base + MVPP2_GMAC_LPI_CTRL0,
+		     MVPP2_GMAC_LPI_CTRL0_TS_MASK,
+		     FIELD_PREP(MVPP2_GMAC_LPI_CTRL0_TS_MASK, ts));
+
+	lpi1 = readl(port->base + MVPP2_GMAC_LPI_CTRL1);
+
+	/* Configure tw */
+	lpi1 = u32_replace_bits(lpi1, tw, MVPP2_GMAC_LPI_CTRL1_TW_MASK);
+
+	/* Enable LPI generation */
+	writel(lpi1 | MVPP2_GMAC_LPI_CTRL1_REQ_EN,
+	       port->base + MVPP2_GMAC_LPI_CTRL1);
+
+	return 0;
+}
+
 static const struct phylink_mac_ops mvpp2_phylink_ops = {
 	.mac_select_pcs = mvpp2_select_pcs,
 	.mac_prepare = mvpp2_mac_prepare,
@@ -6679,6 +6752,8 @@ static const struct phylink_mac_ops mvpp2_phylink_ops = {
 	.mac_finish = mvpp2_mac_finish,
 	.mac_link_up = mvpp2_mac_link_up,
 	.mac_link_down = mvpp2_mac_link_down,
+	.mac_enable_tx_lpi = mvpp2_mac_enable_tx_lpi,
+	.mac_disable_tx_lpi = mvpp2_mac_disable_tx_lpi,
 };
 
 /* Work-around for ACPI */
@@ -6957,6 +7032,15 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 		port->phylink_config.mac_capabilities =
 			MAC_2500FD | MAC_1000FD | MAC_100 | MAC_10;
 
+		__set_bit(PHY_INTERFACE_MODE_SGMII,
+			  port->phylink_config.lpi_interfaces);
+
+		port->phylink_config.lpi_capabilities = MAC_1000FD | MAC_100FD;
+
+		/* Setup EEE.  Choose 250us idle. */
+		port->phylink_config.lpi_timer_default = 250;
+		port->phylink_config.eee_enabled_default = true;
+
 		if (port->priv->global_tx_fc)
 			port->phylink_config.mac_capabilities |=
 				MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
@@ -7031,6 +7115,8 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 			goto err_free_port_pcpu;
 		}
 		port->phylink = phylink;
+
+		mvpp2_mac_disable_tx_lpi(&port->phylink_config);
 	} else {
 		dev_warn(&pdev->dev, "Use link irqs for port#%d. FW update required\n", port->id);
 		port->phylink = NULL;
