diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 97ca5952e34e..1cbbfd196115 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -28,6 +28,13 @@ config PHY_QCOM_EDP
 	  Enable this driver to support the Qualcomm eDP PHY found in various
 	  Qualcomm chipsets.
 
+config PHY_QCOM_ETH_UNIPHY
+	tristate "Qualcomm ethernet uniphy driver"
+	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+	select GENERIC_PHY
+	help
+	  Support for the Qualcomm ethernet uniphy.
+
 config PHY_QCOM_IPQ4019_USB
 	tristate "Qualcomm IPQ4019 USB PHY driver"
 	depends on OF && (ARCH_QCOM || COMPILE_TEST)
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index b030858e0f8d..a9f01e688553 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -21,4 +21,6 @@ obj-$(CONFIG_PHY_QCOM_USB_HS_28NM)	+= phy-qcom-usb-hs-28nm.o
 obj-$(CONFIG_PHY_QCOM_USB_SS)		+= phy-qcom-usb-ss.o
 obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_USB)	+= phy-qcom-ipq806x-usb.o
+
+obj-$(CONFIG_PHY_QCOM_ETH_UNIPHY)	+= phy-qcom-eth-uniphy.o
 obj-$(CONFIG_PHY_QCOM_SGMII_ETH)	+= phy-qcom-sgmii-eth.o
diff --git a/drivers/phy/qualcomm/phy-qcom-eth-uniphy.c b/drivers/phy/qualcomm/phy-qcom-eth-uniphy.c
new file mode 100644
index 000000000000..71d4cefb8adb
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-eth-uniphy.c
@@ -0,0 +1,494 @@
+/*
+ * UNIPHY is the PCS between MAC and PHY which controls the mode of
+ * physical ports. Depends on different SoC, it can support
+ * SGMII/SGMII+/USXGMII. What's more, in some SoC it also support
+ * QSGMII/PSGMII which combine multi SGMII line into single physical port.
+ *
+ * =======================================================================
+ *        ________________________________
+ *       |  _______   IPQ807x             |
+ *       | | GMAC0 |__                    |
+ *       | |_______|  \                   |               _________
+ *       |  _______    \                  |          ____|   GPHY  |
+ *       | | GMAC1 |__  \     _________   |         /    | /Switch |
+ *       | |_______|  \  \___|         |  |     SGMII(+) |_________|
+ *       |  _______    \_____|         |  | P0    /
+ *       | | GMAC2 |_________| UNIPHY0 |--|-----or
+ *       | |_______|    _____|         |  |       \
+ *       |  _______    /   __|         |  |    (Q/P)SGMII __________
+ *       | | GMAC3 |__/   /  |_________|  |         \____| (Q/P)PHY |
+ *       | |_______|     /                |              |__________|
+ *       |  _______     /                 |
+ *       | | GMAC4 |--or                  |               _________
+ *       | |_______|    \     _________   | P1           | (X)GPHY |
+ *       |  ________     or--| UNIPHY1 |--|----SGMII(+)--| /Switch |
+ *       | | XGMAC0 |___/    |_________|  |    /USXGMII  |_________|
+ *       | |________|                     |
+ *       |  ________                      |
+ *       | | GMAC5  |___                  |               _________
+ *       | |________|   \     _________   | P2           | (X)GPHY |
+ *       |  ________     or--| UNIPHY2 |--|----SGMII(+)--| /Switch |
+ *       | | XGMAC1 |___/    |_________|  |    /USXGMII  |_________|
+ *       | |________|                     |
+ *       |________________________________|
+ *
+ * =======================================================================
+ *       _________________________________
+ *       |  _______   IPQ50xx   ______    | P0             ______
+ *       | | GMAC0 |___________| GPHY |---|------UTP------| RJ45 |
+ *       | |_______|           |______|   |               |______|
+ *       |  _______           _________   |               _________
+ *       | | GMAC1 |_________| UNIPHY0 |  | P1           |   GPHY  |
+ *       | |_______|         |_________|--|----SGMII(+)--| /Switch |
+ *       |________________________________|              |_________|
+ *
+ * =======================================================================
+ */
+
+#include <dt-bindings/phy/qcom-eth-uniphy.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+
+#define TCSR_ETH_CMN				0x0
+#define  TCSR_ETH_CMN_ENABLE			BIT(0)
+
+
+#define CMN_PLL_REFCLK_SRC			0x28
+#define  CMN_PLL_REFCLK_SRC_FROM_MASK		GENMASK(9, 8)
+#define   CMN_PLL_REFCLK_SRC_FROM(x)		FIELD_PREP(CMN_PLL_REFCLK_SRC_FROM_MASK, (x))
+#define   CMN_PLL_REFCLK_SRC_FROM_REG		CMN_PLL_REFCLK_SRC_FROM(0)
+#define   CMN_PLL_REFCLK_SRC_FROM_LOGIC		CMN_PLL_REFCLK_SRC_FROM(1)
+#define   CMN_PLL_REFCLK_SRC_FROM_PCS		CMN_PLL_REFCLK_SRC_FROM(2)
+
+#define CMN_PLL_REFCLK				0x784
+#define  CMN_PLL_REFCLK_EXTERNAL		BIT(9)
+#define  CMN_PLL_REFCLK_DIV_MASK		GENMASK(8, 4)
+#define   CMN_PLL_REFCLK_DIV(x)			FIELD_PREP(CMN_PLL_REFCLK_DIV_MASK, (x))
+#define  CMN_PLL_REFCLK_FREQ_MASK		GENMASK(3, 0)
+#define   CMN_PLL_REFCLK_FREQ(x)		FIELD_PREP(CMN_PLL_REFCLK_FREQ_MASK, (x))
+#define   CMN_PLL_REFCLK_FREQ_25M		CMN_PLL_REFCLK_FREQ(3)
+#define   CMN_PLL_REFCLK_FREQ_31250K		CMN_PLL_REFCLK_FREQ(4)
+#define   CMN_PLL_REFCLK_FREQ_40M		CMN_PLL_REFCLK_FREQ(6)
+#define   CMN_PLL_REFCLK_FREQ_48M		CMN_PLL_REFCLK_FREQ(7)
+#define   CMN_PLL_REFCLK_FREQ_50M		CMN_PLL_REFCLK_FREQ(8)
+
+#define CMN_PLL_CTRL				0x780
+#define  CMN_PLL_CTRL_RST_N			BIT(6)
+
+#define CMN_PLL_STATUS				0x64
+#define  CMN_PLL_STATUS_LOCKED			BIT(2)
+
+
+#define IPQ50XX_UNIPHY_CLKOUT			0x74
+#define  IPQ50XX_UNIPHY_CLKOUT_DS_MASK		GENMASK(3, 2)
+#define   IPQ50XX_UNIPHY_CLKOUT_DS(x)		FIELD_PREP(IPQ50XX_UNIPHY_CLKOUT_DS_MASK, (x))
+#define   IPQ50XX_UNIPHY_CLKOUT_DS_2_8V		IPQ50XX_UNIPHY_CLKOUT_DS(0)
+#define   IPQ50XX_UNIPHY_CLKOUT_DS_1_5V		IPQ50XX_UNIPHY_CLKOUT_DS(1)
+#define  IPQ50XX_UNIPHY_CLKOUT_DIV_MASK		GENMASK(1, 1)
+#define   IPQ50XX_UNIPHY_CLKOUT_DIV(x)		FIELD_PREP(IPQ50XX_UNIPHY_CLKOUT_DIV_MASK, (x))
+#define   IPQ50XX_UNIPHY_CLKOUT_DIV_50M		IPQ50XX_UNIPHY_CLKOUT_DIV(0)
+#define   IPQ50XX_UNIPHY_CLKOUT_DIV_25M		IPQ50XX_UNIPHY_CLKOUT_DIV(1)
+#define  IPQ50XX_UNIPHY_CLKOUT_ENABLE		BIT(0)
+
+#define IPQ53XX_UNIPHY_CLKOUT			0x610
+#define  IPQ53XX_UNIPHY_CLKOUT_LDO_LEVEL_MASK	GENMASK(10, 8)
+#define  IPQ53XX_UNIPHY_CLKOUT_DIV_MASK		GENMASK(5, 5)
+#define   IPQ53XX_UNIPHY_CLKOUT_DIV(x)		FIELD_PREP(IPQ53XX_UNIPHY_CLKOUT_DIV_MASK, (x))
+#define   IPQ53XX_UNIPHY_CLKOUT_DIV_50M		IPQ53XX_UNIPHY_CLKOUT_DIV(0)
+#define   IPQ53XX_UNIPHY_CLKOUT_DIV_25M		IPQ53XX_UNIPHY_CLKOUT_DIV(1)
+#define  IPQ53XX_UNIPHY_CLKOUT_PULLDOWN		BIT(3)
+#define  IPQ53XX_UNIPHY_CLKOUT_DS_MASK		GENMASK(2, 1)
+#define   IPQ53XX_UNIPHY_CLKOUT_DS(x)		FIELD_PREP(IPQ53XX_UNIPHY_CLKOUT_DS_MASK, (x))
+#define   IPQ53XX_UNIPHY_CLKOUT_DS_2_8V		IPQ53XX_UNIPHY_CLKOUT_DS(0)
+#define   IPQ53XX_UNIPHY_CLKOUT_DS_1_5V		IPQ53XX_UNIPHY_CLKOUT_DS(1)
+#define  IPQ53XX_UNIPHY_CLKOUT_ENABLE		BIT(0)
+
+
+#define UNIPHY_MODE				0x46c
+#define  UNIPHY_MODE_USXG			BIT(13)
+#define  UNIPHY_MODE_XPCS			BIT(12)
+#define  UNIPHY_MODE_SGMIIPLUS			BIT(11)
+#define  UNIPHY_MODE_SGMII			BIT(10)
+#define  UNIPHY_MODE_PSGMII			BIT(9)
+#define  UNIPHY_MODE_QSGMII			BIT(8)
+#define  UNIPHY_MODE_CH0_MODE_MASK		GENMASK(6, 4)
+#define   UNIPHY_MODE_CH0_MODE(x)		FIELD_PREP(UNIPHY_MODE_CH0_MODE_MASK, (x))
+#define   UNIPHY_MODE_CH0_MODE_1000BASEX	UNIPHY_MODE_CH0_MODE(0)
+#define   UNIPHY_MODE_CH0_MODE_MAC		UNIPHY_MODE_CH0_MODE(2)
+#define  UNIPHY_MODE_SGMII_CHANNEL_MASK		GENMASK(2, 1)
+#define   UNIPHY_MODE_SGMII_CHANNEL(x)		FIELD_PREP(UNIPHY_MODE_SGMII_CHANNEL_MASK, (x))
+#define   UNIPHY_MODE_SGMII_CHANNEL_0		UNIPHY_MODE_SGMII_CHANNEL(0)
+#define   UNIPHY_MODE_SGMII_CHANNEL_1		UNIPHY_MODE_SGMII_CHANNEL(1)
+#define   UNIPHY_MODE_SGMII_CHANNEL_4		UNIPHY_MODE_SGMII_CHANNEL(2)
+#define  UNIPHY_MODE_AN_MODE_MASK		BIT(0)
+#define   UNIPHY_MODE_AN_MODE(x)		FIELD_PREP(UNIPHY_MODE_AN_MODE_MASK, (x))
+#define   UNIPHY_MODE_AN_MODE_ATHEROS		UNIPHY_MODE_AN_MODE(0)
+#define   UNIPHY_MODE_AN_MODE_STANDARD		UNIPHY_MODE_AN_MODE(1)
+
+#define UNIPHY_PLL_CTRL				0x780
+#define  UNIPHY_PLL_CTRL_RST_N			BIT(6)
+
+#define UNIPHY_CALIBRATION			0x1E0
+#define  UNIPHY_CALIBRATION_DONE		BIT(7)
+
+
+#define UNIPHY_CHANNEL(x)			(0x480 + 0x18 * (x))
+#define  UNIPHY_CHANNEL_RSTN			BIT(11)
+#define  UNIPHY_CHANNEL_FORCE_SPEED_25M		BIT(3)
+
+#define UNIPHY_SGMII				0x218
+#define  UNIPHY_SGMII_MODE_MASK			GENMASK(6, 4)
+#define   UNIPHY_SGMII_MODE(x)			FIELD_PREP(UNIPHY_SGMII_MODE_MASK, (x))
+#define   UNIPHY_SGMII_MODE_SGMII		UNIPHY_SGMII_MODE(3)
+#define   UNIPHY_SGMII_MODE_SGMIIPLUS		UNIPHY_SGMII_MODE(5)
+#define   UNIPHY_SGMII_MODE_USXGMII		UNIPHY_SGMII_MODE(7)
+#define  UNIPHY_SGMII_RATE_MASK			GENMASK(1, 0)
+#define   UNIPHY_SGMII_RATE(x)			FIELD_PREP(UNIPHY_SGMII_RATE_MASK, (x))
+
+
+#define SGMII_CLK_RATE				125000000 /* 125M */
+#define SGMII_PLUS_CLK_RATE			312500000 /* 312.5M */
+
+
+struct qcom_eth_uniphy {
+	struct device *dev;
+	void __iomem *base;
+	int num_clks;
+	struct clk_bulk_data *clks;
+	struct reset_control *rst;
+
+	int mode;
+
+	struct clk_hw *clk_rx, *clk_tx;
+	struct clk_hw_onecell_data *clk_data;
+};
+
+
+#define rmwl(addr, mask, val) \
+	writel(((readl(addr) & ~(mask)) | ((val) & (mask))), addr)
+
+static int cmn_init(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *cmn_base;
+	void __iomem *tcsr_base;
+	u32 val;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cmn");
+	if (!res)
+		return 0;
+
+	cmn_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR_OR_NULL(cmn_base))
+		return PTR_ERR(cmn_base);
+
+	/* For IPQ50xx, tcsr is necessary to enable cmn block */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tcsr");
+	if (res) {
+		tcsr_base = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR_OR_NULL(tcsr_base))
+			return PTR_ERR(tcsr_base);
+
+		rmwl((tcsr_base + TCSR_ETH_CMN), TCSR_ETH_CMN_ENABLE,
+		     TCSR_ETH_CMN_ENABLE);
+	}
+
+	rmwl((cmn_base + CMN_PLL_REFCLK_SRC),
+	     CMN_PLL_REFCLK_SRC_FROM_MASK,
+	     CMN_PLL_REFCLK_SRC_FROM_REG);
+	rmwl((cmn_base + CMN_PLL_REFCLK),
+	     (CMN_PLL_REFCLK_EXTERNAL | CMN_PLL_REFCLK_FREQ_MASK
+	      | CMN_PLL_REFCLK_DIV_MASK),
+	     (CMN_PLL_REFCLK_FREQ_48M | CMN_PLL_REFCLK_DIV(2)));
+
+	rmwl((cmn_base + CMN_PLL_CTRL), CMN_PLL_CTRL_RST_N, 0);
+	msleep(1);
+	rmwl((cmn_base + CMN_PLL_CTRL), CMN_PLL_CTRL_RST_N,
+	     CMN_PLL_CTRL_RST_N);
+	msleep(1);
+
+	return read_poll_timeout(readl, val,
+				 (val & CMN_PLL_STATUS_LOCKED),
+				 100, 200000, false,
+				 (cmn_base + CMN_PLL_STATUS));
+}
+
+
+static void uniphy_write(struct qcom_eth_uniphy *uniphy, int addr, u32 val)
+{
+	writel(val, (uniphy->base + addr));
+}
+
+static u32 uniphy_read(struct qcom_eth_uniphy *uniphy, int addr)
+{
+	return readl((uniphy->base + addr));
+}
+
+static void uniphy_rmw(struct qcom_eth_uniphy *uniphy, int addr, u32 mask, u32 val)
+{
+	u32 v = uniphy_read(uniphy, addr);
+	v &= ~mask;
+	v |= val & mask;
+	uniphy_write(uniphy, addr, v);
+}
+
+static int uniphy_clkout_init(struct qcom_eth_uniphy *uniphy)
+{
+	u32 val;
+	int ret;
+
+	ret = of_property_read_u32(uniphy->dev->of_node, "clkout-frequency", &val);
+	if (ret == -EINVAL)
+		return 0;
+	else if (ret < 0)
+		return ret;
+
+	switch(val) {
+		case QCOM_ETH_UNIPHY_CLKOUT_FREQ_25M:
+			uniphy_rmw(uniphy, IPQ50XX_UNIPHY_CLKOUT,
+				   IPQ50XX_UNIPHY_CLKOUT_DIV_MASK,
+				   IPQ50XX_UNIPHY_CLKOUT_DIV_25M);
+			break;
+		case QCOM_ETH_UNIPHY_CLKOUT_FREQ_50M:
+			uniphy_rmw(uniphy, IPQ50XX_UNIPHY_CLKOUT,
+				   IPQ50XX_UNIPHY_CLKOUT_DIV_MASK,
+				   IPQ50XX_UNIPHY_CLKOUT_DIV_50M);
+			break;
+		default:
+			dev_err(uniphy->dev, "Unsupported clkout-frequency: %d\n", val);
+			return -EINVAL;
+	}
+
+	ret = of_property_read_u32(uniphy->dev->of_node, "clkout-drive-strength", &val);
+	if (ret != -EINVAL) {
+		if (ret < 0)
+			return ret;
+
+		switch(val) {
+			case QCOM_ETH_UNIPHY_CLKOUT_DS_1_5V:
+				uniphy_rmw(uniphy, IPQ50XX_UNIPHY_CLKOUT,
+					   IPQ50XX_UNIPHY_CLKOUT_DS_MASK,
+					   IPQ50XX_UNIPHY_CLKOUT_DS_1_5V);
+				break;
+			case QCOM_ETH_UNIPHY_CLKOUT_DS_2_8V:
+				uniphy_rmw(uniphy, IPQ50XX_UNIPHY_CLKOUT,
+					   IPQ50XX_UNIPHY_CLKOUT_DS_MASK,
+					   IPQ50XX_UNIPHY_CLKOUT_DS_2_8V);
+				break;
+			default:
+				dev_err(uniphy->dev, "Unsupported clkout-drive-strength: %d\n", val);
+				return -EINVAL;
+		}
+
+	}
+
+	uniphy_rmw(uniphy, IPQ50XX_UNIPHY_CLKOUT,
+		   IPQ50XX_UNIPHY_CLKOUT_ENABLE,
+		   IPQ50XX_UNIPHY_CLKOUT_ENABLE);
+
+	return 0;
+}
+
+static int uniphy_mode_set(struct qcom_eth_uniphy *uniphy)
+{
+	int ret;
+
+	ret = of_property_read_u32(uniphy->dev->of_node, "mode",
+				   &uniphy->mode);
+	if (ret < 0)
+		return ret;
+
+	switch(uniphy->mode) {
+		case QCOM_ETH_UNIPHY_MODE_SGMII:
+			uniphy_write(uniphy, UNIPHY_MODE,
+				     UNIPHY_MODE_SGMII);
+			uniphy_rmw(uniphy, UNIPHY_SGMII,
+				   UNIPHY_SGMII_MODE_MASK,
+				   UNIPHY_SGMII_MODE_SGMII);
+			break;
+		default:
+			dev_err(uniphy->dev, "Unsupported mode: %d\n",
+				uniphy->mode);
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int uniphy_calibrate(struct qcom_eth_uniphy *uniphy)
+{
+	u32 val;
+
+	uniphy_rmw(uniphy, UNIPHY_PLL_CTRL, UNIPHY_PLL_CTRL_RST_N, 0);
+	msleep(1);
+	uniphy_rmw(uniphy, UNIPHY_PLL_CTRL, UNIPHY_PLL_CTRL_RST_N,
+		   UNIPHY_PLL_CTRL_RST_N);
+	msleep(1);
+
+	return read_poll_timeout(uniphy_read, val,
+				 (val & UNIPHY_CALIBRATION_DONE),
+				 100, 200000, false,
+				 uniphy, UNIPHY_CALIBRATION);
+}
+
+static int uniphy_clk_register(struct qcom_eth_uniphy *uniphy)
+{
+	unsigned long rate;
+	char name[64];
+	int ret;
+
+	switch (uniphy->mode) {
+		case QCOM_ETH_UNIPHY_MODE_SGMII:
+			rate = SGMII_CLK_RATE;
+			break;
+	}
+
+	snprintf(name, sizeof(name), "%s#rx", dev_name(uniphy->dev));
+	uniphy->clk_rx = clk_hw_register_fixed_rate(uniphy->dev, name,
+						    NULL, 0, rate);
+	if (IS_ERR_OR_NULL(uniphy->clk_rx))
+		return dev_err_probe(uniphy->dev, PTR_ERR(uniphy->clk_rx),
+				     "failed to register rx clock\n");
+
+	snprintf(name, sizeof(name), "%s#tx", dev_name(uniphy->dev));
+	uniphy->clk_tx = clk_hw_register_fixed_rate(uniphy->dev, name,
+						    NULL, 0, rate);
+	if (IS_ERR_OR_NULL(uniphy->clk_tx))
+		return dev_err_probe(uniphy->dev, PTR_ERR(uniphy->clk_tx),
+				     "failed to register rx clock\n");
+
+	uniphy->clk_data = devm_kzalloc(uniphy->dev,
+					struct_size(uniphy->clk_data, hws, 2),
+					GFP_KERNEL);
+	if (!uniphy->clk_data)
+		return dev_err_probe(uniphy->dev, -ENOMEM,
+				     "failed to allocate clk_data\n");
+
+	uniphy->clk_data->num = 2;
+	uniphy->clk_data->hws[0] = uniphy->clk_rx;
+	uniphy->clk_data->hws[1] = uniphy->clk_tx;
+	ret = of_clk_add_hw_provider(uniphy->dev->of_node,
+				     of_clk_hw_onecell_get,
+				     uniphy->clk_data);
+	if (ret)
+		return dev_err_probe(uniphy->dev, ret,
+				     "fail to register clock provider\n");
+
+	return 0;
+}
+
+static int qcom_eth_uniphy_calibrate(struct phy *phy)
+{
+	struct qcom_eth_uniphy *uniphy = phy_get_drvdata(phy);
+	dev_info(uniphy->dev, "calibrating\n");
+	return uniphy_calibrate(uniphy);
+}
+
+static const struct phy_ops qcom_eth_uniphy_ops = {
+	.calibrate = qcom_eth_uniphy_calibrate,
+	.owner = THIS_MODULE,
+};
+
+static int qcom_eth_uniphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qcom_eth_uniphy *uniphy;
+	struct phy *phy;
+	struct phy_provider *phy_provider;
+	int ret;
+
+	ret = cmn_init(pdev);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to init cmn block\n");
+
+	uniphy = devm_kzalloc(dev, sizeof(*uniphy), GFP_KERNEL);
+	if (!uniphy)
+		return dev_err_probe(dev, -ENOMEM,
+				     "failed to allocate priv\n");
+
+	uniphy->dev = dev;
+	uniphy->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(uniphy->base))
+		return dev_err_probe(dev, PTR_ERR(uniphy->base),
+				     "failed to ioremap base\n");
+
+	uniphy->num_clks = devm_clk_bulk_get_all(uniphy->dev, &uniphy->clks);
+	if (uniphy->num_clks < 0)
+		return dev_err_probe(uniphy->dev, uniphy->num_clks,
+				     "failed to acquire clocks\n");
+
+	ret = clk_bulk_prepare_enable(uniphy->num_clks, uniphy->clks);
+	if (ret)
+		return dev_err_probe(uniphy->dev, ret,
+				     "failed to enable clocks\n");
+
+	uniphy->rst = devm_reset_control_array_get_exclusive(uniphy->dev);
+	if (IS_ERR_OR_NULL(uniphy->rst))
+		return dev_err_probe(uniphy->dev, PTR_ERR(uniphy->rst),
+				     "failed to acquire reset\n");
+
+	ret = reset_control_reset(uniphy->rst);
+	if (ret)
+		return dev_err_probe(uniphy->dev, ret,
+				     "failed to reset\n");
+
+	ret = uniphy_clkout_init(uniphy);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to init clkout\n");
+
+	ret = uniphy_mode_set(uniphy);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to set mode\n");
+
+	ret = uniphy_calibrate(uniphy);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to calibrate\n");
+
+	ret = uniphy_clk_register(uniphy);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to register clocks\n");
+
+	phy = devm_phy_create(dev, dev->of_node, &qcom_eth_uniphy_ops);
+	if (IS_ERR(phy))
+		return dev_err_probe(dev, PTR_ERR(phy),
+				     "failed to register phy\n");
+
+	phy_set_drvdata(phy, uniphy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return dev_err_probe(dev, PTR_ERR(phy_provider),
+				     "failed to register phy provider\n");
+
+	return 0;
+}
+
+static const struct of_device_id qcom_eth_uniphy_of_match[] = {
+	{ .compatible = "qcom,ipq5018-eth-uniphy" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qcom_eth_uniphy_of_match);
+
+static struct platform_driver qcom_eth_uniphy_driver = {
+	.probe	= qcom_eth_uniphy_probe,
+	.driver	= {
+		.name		= "qcom-eth-uniphy",
+		.of_match_table	= qcom_eth_uniphy_of_match,
+	},
+};
+module_platform_driver(qcom_eth_uniphy_driver);
+
+MODULE_DESCRIPTION("Qualcomm ethernet uniphy driver");
+MODULE_AUTHOR("Ziyang Huang <hzyitc@outlook.com>");
diff --git a/include/dt-bindings/phy/qcom-eth-uniphy.h b/include/dt-bindings/phy/qcom-eth-uniphy.h
new file mode 100644
index 000000000000..038f82522ccd
--- /dev/null
+++ b/include/dt-bindings/phy/qcom-eth-uniphy.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_PHY_QCOM_ETH_UNIPHY
+#define _DT_BINDINGS_PHY_QCOM_ETH_UNIPHY
+
+#define QCOM_ETH_UNIPHY_MODE_SGMII		0
+#define QCOM_ETH_UNIPHY_MODE_SGMII_PLUS		1
+
+#define QCOM_ETH_UNIPHY_CLKOUT_FREQ_25M		25000000
+#define QCOM_ETH_UNIPHY_CLKOUT_FREQ_50M		50000000
+
+#define QCOM_ETH_UNIPHY_CLKOUT_DS_1_5V		1500
+#define QCOM_ETH_UNIPHY_CLKOUT_DS_2_8V		2800
+
+#endif
