diff --git a/dcb.8 b/dcb.8.new
index a1d6505..2202224 100644
--- a/dcb.8
+++ b/dcb.8.new
@@ -2,74 +2,74 @@
 .SH NAME
 dcb \- show / manipulate DCB (Data Center Bridging) settings
 .SH SYNOPSIS
-.sp
 .ad l
 .in +8
 
 .ti -8
 .B dcb
-.RI "[ " OPTIONS " ] "
+.RI "[ " OPTIONS " ]"
 .RB "{ " app " | " buffer " | " ets " | " maxrate " | " pfc " }"
 .RI "{ " COMMAND " | " help " }"
 .sp
 
 .ti -8
 .B dcb
-.RB "[ " -force " ] "
-.BI "-batch " filename
+.RB "[ " \-force " ]"
+.BI "\-batch " filename
 .sp
 
 .ti -8
 .B dcb
-.RI "[ " OPTIONS " ] "
+.RI "[ " OPTIONS " ]"
 .B help
 .sp
 
 .SH OPTIONS
 
 .TP
-.BR "\-n" , " \--netns " <NETNS>
+.BR "\-n" , " \-\-netns " <NETNS>
 switches
 .B dcb
 to the specified network namespace
 .IR NETNS .
 
 .TP
-.BR "\-V" , " --Version"
+.BR "\-V" , " \-\-Version"
 Print the version of the
 .B dcb
 utility and exit.
 
 .TP
-.BR "\-b", " --batch " <FILENAME>
-Read commands from provided file or standard input and invoke them. First
-failure will cause termination of dcb.
+.BR "\-b", " \-\-batch " <FILENAME>
+Read commands from provided file or standard input and invoke them.
+First failure will cause termination of dcb.
 
 .TP
-.BR "\-f", " --force"
-Don't terminate dcb on errors in batch mode. If there were any errors during
-execution of the commands, the application return code will be non zero.
+.BR "\-f", " \-\-force"
+Don't terminate dcb on errors in batch mode.
+If there were any errors during execution of the commands,
+the application return code will be non zero.
 
 .TP
-.BR "\-i" , " --iec"
-When showing rates, use ISO/IEC 1024-based prefixes (Ki, Mi, Bi) instead of
-the 1000-based ones (K, M, B).
+.BR "\-i" , " \-\-iec"
+When showing rates, use ISO/IEC 1024-based prefixes (Ki, Mi, Gi) instead of
+the 1000-based ones (K, M, G).
 
 .TP
-.BR "\-j" , " --json"
+.BR "\-j" , " \-\-json"
 Generate JSON output.
 
 .TP
-.BR "\-N" , " --Numeric"
+.BR "\-N" , " \-\-Numeric"
 If the subtool in question translates numbers to symbolic names in some way,
 suppress this translation.
 
 .TP
-.BR "\-p" , " --pretty"
-When combined with -j generate a pretty JSON output.
+.BR "\-p" , " \-\-pretty"
+When combined with \-j generate a pretty JSON output.
 
 .TP
-.BR "\-s" , " --statistics"
+.BR "\-s" , " \-\-statistics"
 If the object in question contains any statistical counters, shown them as
 part of the "show" output.
 
@@ -77,59 +77,66 @@ part of the "show" output.
 
 .TP
 .B app
-- Configuration of application priority table
+\(en Configuration of application priority table
 
 .TP
 .B buffer
-- Configuration of port buffers
+\(en Configuration of port buffers
 
 .TP
 .B ets
-- Configuration of ETS (Enhanced Transmission Selection)
+\(en Configuration of ETS (Enhanced Transmission Selection)
 
 .TP
 .B maxrate
-- Configuration of per-TC maximum transmit rate
+\(en Configuration of per-TC maximum transmit rate
 
 .TP
 .B pfc
-- Configuration of PFC (Priority-based Flow Control)
+\(en Configuration of PFC (Priority-based Flow Control)
 
 .SH COMMANDS
 
-A \fICOMMAND\fR specifies the action to perform on the object. The set of
-possible actions depends on the object type. As a rule, it is possible to
+A \fICOMMAND\fR specifies the action to perform on the object.
+The set of possible actions depends on the object type.
+As a rule, it is possible to
 .B show
 objects and to invoke topical
-.B help,
+.BR help ,
 which prints a list of available commands and argument syntax conventions.
 
 .SH ARRAY PARAMETERS
 
 Like commands, specification of parameters is in the domain of individual
-objects (and their commands) as well. However, much of the DCB interface
-revolves around arrays of fixed size that specify one value per some key, such
-as per traffic class or per priority. There is therefore a single syntax for
-adjusting elements of these arrays. It consists of a series of
-\fIKEY\fB:\fIVALUE\fR pairs, where the meaning of the individual keys and values
-depends on the parameter.
+objects (and their commands) as well.
+However, much of the DCB interface
+revolves around arrays of fixed size that specify one value per some key,
+such as per traffic class or per priority.
+There is therefore a single syntax for adjusting elements of these arrays.
+It consists of a series of \fIKEY\fB:\fIVALUE\fR pairs,
+where the meaning of the individual keys and values depends on the parameter.
 
 The elements are evaluated in order from left to right, and the latter ones
-override the earlier ones. The elements that are not specified on the command
+override the earlier ones.
+The elements that are not specified on the command
 line are queried from the kernel and their current value is retained.
 
 As an example, take a made-up parameter tc-juju, which can be set to charm
-traffic in a given TC with either good luck or bad luck. \fIKEY\fR can therefore
-be 0..7 (as is usual for TC numbers in DCB), and \fIVALUE\fR either of
-\fBnone\fR, \fBgood\fR, and \fBbad\fR. An example of changing a juju value of
-TCs 0 and 7, while leaving all other intact, would then be:
+traffic in a given TC with either good luck or bad luck.
+\fIKEY\fR can therefore be 0..7
+(as is usual for TC numbers in DCB),
+and \fIVALUE\fR either of \fBnone\fR, \fBgood\fR, and \fBbad\fR.
+An example of changing a juju value of TCs 0 and 7,
+while leaving all other intact, would then be:
 
 .P
 # dcb foo set dev eth0 tc-juju 0:good 7:bad
 
 A special key, \fBall\fR, is recognized which sets the same value to all array
-elements. This can be combined with the usual single-element syntax. E.g. in the
-following, the juju of all keys is set to \fBnone\fR, except 0 and 7, which have
+elements.
+This can be combined with the usual single-element syntax.
+E.g., in the following,
+the juju of all keys is set to \fBnone\fR, except 0 and 7, which have
 other values:
 
 .P
@@ -146,7 +153,6 @@ Exit status is 0 if command was successful or a positive integer upon failure.
 .BR dcb-maxrate (8),
 .BR dcb-pfc (8),
 .BR dcb-rewr (8)
-.br
 
 .SH REPORTING BUGS
 Report any bugs to the Network Developers mailing list
