diff mbox series

[v6,5/7] net/mlx5: Rely on `link_active_reporting'

Message ID alpine.DEB.2.21.2302051450280.33812@angie.orcam.me.uk (mailing list archive)
State Not Applicable
Delegated to: Netdev Maintainers
Headers show
Series pci: Work around ASMedia ASM2824 PCIe link training failures | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Maciej W. Rozycki Feb. 5, 2023, 3:49 p.m. UTC 
Use `link_active_reporting' to determine whether Data Link Layer Link 
Active Reporting is available rather than re-retrieving the capability.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
---
NB this has been compile-tested only with PPC64LE and x86-64 
configurations.

New change in v6.
---
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

linux-pcie-link-active-reporting-mlx5.diff
diff mbox series

Patch

Index: linux-macro/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
===================================================================
--- linux-macro.orig/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ linux-macro/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -294,7 +294,6 @@  static int mlx5_pci_link_toggle(struct m
 	unsigned long timeout;
 	struct pci_dev *sdev;
 	int cap, err;
-	u32 reg32;
 
 	/* Check that all functions under the pci bridge are PFs of
 	 * this device otherwise fail this function.
@@ -333,11 +332,8 @@  static int mlx5_pci_link_toggle(struct m
 		return err;
 
 	/* Check link */
-	err = pci_read_config_dword(bridge, cap + PCI_EXP_LNKCAP, &reg32);
-	if (err)
-		return err;
-	if (!(reg32 & PCI_EXP_LNKCAP_DLLLARC)) {
-		mlx5_core_warn(dev, "No PCI link reporting capability (0x%08x)\n", reg32);
+	if (!bridge->link_active_reporting) {
+		mlx5_core_warn(dev, "No PCI link reporting capability\n");
 		msleep(1000);
 		goto restore;
 	}