| Message ID | alpine.DEB.2.21.2304060116380.13659@angie.orcam.me.uk (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | pci: Work around ASMedia ASM2824 PCIe link training failures | expand |
| Context | Check | Description |
|---|---|---|
| netdev/series_format | success | Posting correctly formatted |
| netdev/tree_selection | success | Guessed tree name to be net-next |
| netdev/fixes_present | success | Fixes tag not required for -next series |
| netdev/header_inline | success | No static functions without inline keyword in header files |
| netdev/build_32bit | success | Errors and warnings before: 59 this patch: 59 |
| netdev/cc_maintainers | success | CCed 2 of 2 maintainers |
| netdev/build_clang | success | Errors and warnings before: 18 this patch: 18 |
| netdev/verify_signedoff | success | Signed-off-by tag matches author and committer |
| netdev/deprecated_api | success | None detected |
| netdev/check_selftest | success | No net selftest shell script |
| netdev/verify_fixes | success | No Fixes tag |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 57 this patch: 57 |
| netdev/checkpatch | warning | CHECK: Alignment should match open parenthesis |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/source_inline | success | Was 0 now: 0 |
On Thu, Apr 06, 2023 at 01:21:31AM +0100, Maciej W. Rozycki wrote: > Attempt to handle cases such as with a downstream port of the ASMedia > ASM2824 PCIe switch where link training never completes and the link > continues switching between speeds indefinitely with the data link layer > never reaching the active state. We're going to land this series this cycle, come hell or high water. We talked about reusing pcie_retrain_link() earlier. IIRC that didn't work: ASPM needs to use PCI_EXP_LNKSTA_LT because not all devices support PCI_EXP_LNKSTA_DLLLA, and you need PCI_EXP_LNKSTA_DLLLA because the erratum makes PCI_EXP_LNKSTA_LT flap. What if we made pcie_retrain_link() reusable by making it: bool pcie_retrain_link(struct pci_dev *pdev, u16 link_status_bit) so ASPM could use pcie_retrain_link(link->pdev, PCI_EXP_LNKSTA_LT) and you could use pcie_retrain_link(dev, PCI_EXP_LNKSTA_DLLLA)? Maybe do it two steps? 1) Move pcie_retrain_link() just after pcie_wait_for_link() and make it take link->pdev instead of link. 2) Add the bit parameter. I'm OK with having pcie_retrain_link() in pci.c, but the surrounding logic about restricting to 2.5GT/s, retraining, removing the restriction, retraining again is stuff I'd rather have in quirks.c so it doesn't clutter pci.c. I think it'd be good if the pci_device_add() path made clear that this is a workaround for a problem, e.g., void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) { ... if (pcie_link_failed(dev)) pcie_fix_link_train(dev); where pcie_fix_link_train() could live in quirks.c (with a stub when CONFIG_PCI_QUIRKS isn't enabled). It *might* even be worth adding it and the stub first because that's a trivial patch and wouldn't clutter the probe.c git history with all the grotty details about ASM2824 and this topology. > +int pcie_downstream_link_retrain(struct pci_dev *dev) > +{ > + static const struct pci_device_id ids[] = { > + { PCI_VDEVICE(ASMEDIA, 0x2824) }, /* ASMedia ASM2824 */ > + {} > + }; > + u16 lnksta, lnkctl2; > + > + if (!pci_is_pcie(dev) || !pcie_downstream_port(dev) || > + !pcie_cap_has_lnkctl2(dev) || !dev->link_active_reporting) > + return -1; > + > + pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2); > + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); > + if ((lnksta & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_DLLLA)) == > + PCI_EXP_LNKSTA_LBMS) { You go to some trouble to make sure PCI_EXP_LNKSTA_LBMS is set, and I can't remember what the reason is. If you make a preparatory patch like this, it would give a place for that background, e.g., +bool pcie_link_failed(struct pci_dev *dev) +{ + u16 lnksta; + + if (!pci_is_pcie(dev) || !pcie_downstream_port(dev) || + !pcie_cap_has_lnkctl2(dev) || !dev->link_active_reporting) + return false; + + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); + if ((lnksta & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_DLLLA)) == + PCI_EXP_LNKSTA_LBMS) + return true; + + return false; +} If this is a generic thing and checking PCI_EXP_LNKSTA_LBMS makes sense for everybody, it could go in pci.c; otherwise it could go in quirks.c as well. I guess it's not *truly* generic anyway because it only detects link training failures for devices that have LNKCTL2 and link_active_reporting. > + unsigned long timeout; > + u16 lnkctl; > + > + pci_info(dev, "broken device, retraining non-functional downstream link at 2.5GT/s\n"); > + > + pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnkctl); > + lnkctl |= PCI_EXP_LNKCTL_RL; > + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; > + lnkctl2 |= PCI_EXP_LNKCTL2_TLS_2_5GT; > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, lnkctl); > + /* > + * Due to an erratum in some devices the Retrain Link bit > + * needs to be cleared again manually to allow the link > + * training to succeed. > + */ > + lnkctl &= ~PCI_EXP_LNKCTL_RL; > + if (dev->clear_retrain_link) > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, > + lnkctl); > + > + timeout = jiffies + PCIE_LINK_RETRAIN_TIMEOUT; > + do { > + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, > + &lnksta); > + if (lnksta & PCI_EXP_LNKSTA_DLLLA) > + break; > + usleep_range(10000, 20000); > + } while (time_before(jiffies, timeout)); > + > + if (!(lnksta & PCI_EXP_LNKSTA_DLLLA)) { > + pci_info(dev, "retraining failed\n"); > + return -1; > + } > + } > + if (IS_ENABLED(CONFIG_PCI_QUIRKS) && (lnksta & PCI_EXP_LNKSTA_DLLLA) && > + (lnkctl2 & PCI_EXP_LNKCTL2_TLS) == PCI_EXP_LNKCTL2_TLS_2_5GT && > + pci_match_id(ids, dev)) { > + u32 lnkcap; > + u16 lnkctl; > + > + pci_info(dev, "removing 2.5GT/s downstream link speed restriction\n"); > + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); > + pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnkctl); > + lnkctl |= PCI_EXP_LNKCTL_RL; > + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; > + lnkctl2 |= lnkcap & PCI_EXP_LNKCAP_SLS; > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, lnkctl); This starts a retrain; should we wait for training to complete? > + } If we put most of this into a pcie_fix_link_train() (separated from detecting the *need* to fix something), could it be made to look sort of like this? (I suppose you'd want to return bool and rename it that reads naturally, e.g., "pcie_link_forcibly_retrained()", "pcie_link_retrained()", etc) +void pcie_fix_link_train(struct pci_dev *dev) +{ + u16 lnkctl2; + u32 lnkcap; + bool linkup; + + pci_info(dev, "attempting link retrain at 2.5GT/s\n"); + pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2); + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; + lnkctl2 |= PCI_EXP_LNKCTL2_TLS_2_5GT; + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); + + linkup = pcie_retrain_link(dev, PCI_EXP_LNKSTA_DLLLA); + if (!linkup) { + pci_info(dev, "retraining failed\n"); + return; + } + + if (LNKCAP supports only 2.5GT/s) + return; + + if (!pci_match_id(ids, dev)) + return; Your comment said "if we know this is *safe*"; I can't remember if pci_match_id() is there to avoid a known problem? + + pci_info(dev, "attempting link retrain at max supported rate\n"); + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; + lnkctl2 |= lnkcap & PCI_EXP_LNKCAP_SLS; + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); + + linkup = pcie_retrain_link(dev, PCI_EXP_LNKSTA_DLLLA); + if (!linkup) + pci_info(dev, "retraining failed\n"); +} > + > + return 0; > +} > + > +/* Same as above, but called for a downstream device. */ > +static int pcie_upstream_link_retrain(struct pci_dev *dev) > +{ > + struct pci_dev *bridge; > + > + bridge = pci_upstream_bridge(dev); > + if (bridge) > + return pcie_downstream_link_retrain(bridge); > + else > + return -1; > +} > + > static int pci_acs_enable; > > /** > @@ -1148,8 +1274,8 @@ void pci_resume_bus(struct pci_bus *bus) > > static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout) > { > + int retrain = 0; > int delay = 1; > - u32 id; > > /* > * After reset, the device should not silently discard config > @@ -1163,21 +1289,37 @@ static int pci_dev_wait(struct pci_dev * > * Command register instead of Vendor ID so we don't have to > * contend with the CRS SV value. > */ > - pci_read_config_dword(dev, PCI_COMMAND, &id); > - while (PCI_POSSIBLE_ERROR(id)) { > + for (;;) { > + u32 id; > + > + pci_read_config_dword(dev, PCI_COMMAND, &id); > + if (!PCI_POSSIBLE_ERROR(id)) { > + if (delay > PCI_RESET_WAIT) > + pci_info(dev, "ready %dms after %s\n", > + delay - 1, reset_type); > + break; > + } > + > if (delay > timeout) { > pci_warn(dev, "not ready %dms after %s; giving up\n", > delay - 1, reset_type); > return -ENOTTY; > } > > - if (delay > PCI_RESET_WAIT) > + if (delay > PCI_RESET_WAIT) { > + if (!retrain) { > + retrain = 1; > + if (pcie_upstream_link_retrain(dev) == 0) { > + delay = 1; > + continue; > + } > + } > pci_info(dev, "not ready %dms after %s; waiting\n", > delay - 1, reset_type); > + } Thanks for fixing this in the reset path, too. Can we move this part to a separate patch? It's related to the rest of the patch, but it looks so much different that I think it would be easier to understand by itself. I think I might try to fold the pcie_upstream_link_retrain() directly in here because the "upstream link retrain" in the function name doesn't really make sense in PCIe terms. Bjorn
On Thu, 4 May 2023, Bjorn Helgaas wrote: > On Thu, Apr 06, 2023 at 01:21:31AM +0100, Maciej W. Rozycki wrote: > > Attempt to handle cases such as with a downstream port of the ASMedia > > ASM2824 PCIe switch where link training never completes and the link > > continues switching between speeds indefinitely with the data link layer > > never reaching the active state. > > We're going to land this series this cycle, come hell or high water. Thank you for coming back to me and for your promise. I'll strive to address your concerns next weekend. Unfortunately a PDU in my remote lab has botched up and I've lost control over it (thankfully not one for the RISC-V machine affected by the patch series, so I can still manage it for reboots, etc., but the botched PDU is actually upstream), so depending on how situation develops I may have to book air travel instead and spend the whole weekend getting things back to normal operation at my lab. That unit was not supposed to fail, not in such a silly way anyway, sigh... Maciej
On Sun, 7 May 2023, Maciej W. Rozycki wrote: > > We're going to land this series this cycle, come hell or high water. > > Thank you for coming back to me and for your promise. I'll strive to > address your concerns next weekend. > > Unfortunately a PDU in my remote lab has botched up and I've lost control > over it (thankfully not one for the RISC-V machine affected by the patch > series, so I can still manage it for reboots, etc., but the botched PDU is > actually upstream), so depending on how situation develops I may have to > book air travel instead and spend the whole weekend getting things back to > normal operation at my lab. That unit was not supposed to fail, not in > such a silly way anyway, sigh... Last Thu the situation with the PDU became critical, so I spent a better part of yesterday and today travelling and then all night long getting things sorted. So it'll have to be next weekend when I get back to these patches. I hope we can still make it regardless. Maciej
On Thu, 4 May 2023, Bjorn Helgaas wrote: > We talked about reusing pcie_retrain_link() earlier. IIRC that didn't > work: ASPM needs to use PCI_EXP_LNKSTA_LT because not all devices > support PCI_EXP_LNKSTA_DLLLA, and you need PCI_EXP_LNKSTA_DLLLA > because the erratum makes PCI_EXP_LNKSTA_LT flap. > > What if we made pcie_retrain_link() reusable by making it: > > bool pcie_retrain_link(struct pci_dev *pdev, u16 link_status_bit) > > so ASPM could use pcie_retrain_link(link->pdev, PCI_EXP_LNKSTA_LT) and > you could use pcie_retrain_link(dev, PCI_EXP_LNKSTA_DLLLA)? This is somewhat more complicated, because of the inverted logic between the two status bits. Therefore I think a boolean flag is more adequate with preparatory logic within the function itself. This will tighten the call interface as well. > Maybe do it two steps? > > 1) Move pcie_retrain_link() just after pcie_wait_for_link() and make > it take link->pdev instead of link. > > 2) Add the bit parameter. Having compared the two pieces side by side now I think it makes sense. While there are minor differences, most prominently the original code is more aggressive than mine in polling the status bit, I think these details are not significant enough to argue over them here. And we can consider switching to more modern `usleep_range' interface separately. A minor pessimisation resulting is that LNKSTA has to be reread in the caller after return from `pcie_retrain_link'; previously the last value read in the poll loop could have been reused. > I'm OK with having pcie_retrain_link() in pci.c, but the surrounding > logic about restricting to 2.5GT/s, retraining, removing the > restriction, retraining again is stuff I'd rather have in quirks.c so > it doesn't clutter pci.c. Well, it was there in quirks.c originally and I only moved this piece following your earlier suggestion: > If we think the first part (attempting the retrain) is safe to do > whenever the link is down, maybe we should do that more directly as > part of the PCI core instead of as a quirk? as in here: <https://lore.kernel.org/r/20221109050418.GA529724@bhelgaas/>, though if you did change your mind after all, I can move it back, sure. It's not always that the first thought is the best, or sometimes good at all. > I think it'd be good if the pci_device_add() path made clear that this > is a workaround for a problem, e.g., > > void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) > { > ... > if (pcie_link_failed(dev)) > pcie_fix_link_train(dev); > > where pcie_fix_link_train() could live in quirks.c (with a stub when > CONFIG_PCI_QUIRKS isn't enabled). It *might* even be worth adding it > and the stub first because that's a trivial patch and wouldn't clutter > the probe.c git history with all the grotty details about ASM2824 and > this topology. I have added a stub now, both as an intermediate step and ultimately for !PCI_QUIRKS, but I disagree about having the check in pci.c and the fix in quirks.c, because from the code structure's point of view it makes no sense IMHO to have the check enabled and the fix disabled both at a time for !PCI_QUIRKS, even if the compiler would actually optimise the check away in that case. Please let me know if you maintain your suggestion and if so, then why you find it so important. I think with the use of `pcie_retrain_link' this code has become straightforward enough not to need to be split or factored out any further (and while factoring out the conditionals only would make some sense to me, it would require duplicating configuration register accesses even further). > > +int pcie_downstream_link_retrain(struct pci_dev *dev) > > +{ > > + static const struct pci_device_id ids[] = { > > + { PCI_VDEVICE(ASMEDIA, 0x2824) }, /* ASMedia ASM2824 */ > > + {} > > + }; > > + u16 lnksta, lnkctl2; > > + > > + if (!pci_is_pcie(dev) || !pcie_downstream_port(dev) || > > + !pcie_cap_has_lnkctl2(dev) || !dev->link_active_reporting) > > + return -1; > > + > > + pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2); > > + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); > > + if ((lnksta & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_DLLLA)) == > > + PCI_EXP_LNKSTA_LBMS) { > > You go to some trouble to make sure PCI_EXP_LNKSTA_LBMS is set, and I > can't remember what the reason is. If you make a preparatory patch > like this, it would give a place for that background, e.g., It has been already documented along with the code in question: * With the ASM2824 we can rely on the otherwise optional Data Link Layer * Link Active status bit and in the failed link training scenario it will * be off along with the Link Bandwidth Management Status indicating that * hardware has changed the link speed or width in an attempt to correct * unreliable link operation. For a port that has been left unconnected * both bits will be clear. [...] > +bool pcie_link_failed(struct pci_dev *dev) > +{ > + u16 lnksta; > + > + if (!pci_is_pcie(dev) || !pcie_downstream_port(dev) || > + !pcie_cap_has_lnkctl2(dev) || !dev->link_active_reporting) > + return false; > + > + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); > + if ((lnksta & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_DLLLA)) == > + PCI_EXP_LNKSTA_LBMS) > + return true; > + > + return false; > +} > > If this is a generic thing and checking PCI_EXP_LNKSTA_LBMS makes > sense for everybody, it could go in pci.c; otherwise it could go in > quirks.c as well. I guess it's not *truly* generic anyway because it > only detects link training failures for devices that have LNKCTL2 and > link_active_reporting. I do not have enough information to tell whether this is generic or not. Checking for PCI_EXP_LNKSTA_LBMS is important, because otherwise this code would attempt to retrain every empty slot or otherwise unconnected PCIe link, which we do not want to do and which would surely take a lot of time with some of the larger systems, to say nothing of the log clutter showing that there is something wrong with the system while indeed there is nothing. Out of all the ports whose data link layer is not in the DL_Active state the LBMS bit is only set for the failed link in my system and I suspect it is related to the link speed negotiation erratum causing unsuccessful link training to repeat indefinitely. By definition LBMS cannot be set for an unconnected link, because the bit is only allowed to be set for an event observed that has happened with a port reporting no DL_Down status at any time throughout the event, which can only happen with the physical layer up, which of course cannot happen for an unconnected link (of course I can imagine another erratum affecting the LBMS bit, but that has not been reported yet). While making sure I got all the details in the previous paragraph right I have gone through a reference to the DL_Feature data link layer state (and a potential need to disable it for interacting with a non-compliant legacy downstream device), but neither device involved supports it, so it can't possibly be the cause for the phenomenon observed. IOW the LBMS bit serves the purpose of indicating that there is actually a device down an inactive link (the state of the physical layer's LinkUp bit is not directly accessible via software). And one might argue that the state where LBMS is set but DLLLA is clear (where actually supported) after a device reset is indeed a generic sign of an odd link training issue. If you think it would make sense to include any piece of the text above with the existing documentation, then I'll be happy to improve it. > > + if (IS_ENABLED(CONFIG_PCI_QUIRKS) && (lnksta & PCI_EXP_LNKSTA_DLLLA) && > > + (lnkctl2 & PCI_EXP_LNKCTL2_TLS) == PCI_EXP_LNKCTL2_TLS_2_5GT && > > + pci_match_id(ids, dev)) { > > + u32 lnkcap; > > + u16 lnkctl; > > + > > + pci_info(dev, "removing 2.5GT/s downstream link speed restriction\n"); > > + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); > > + pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnkctl); > > + lnkctl |= PCI_EXP_LNKCTL_RL; > > + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; > > + lnkctl2 |= lnkcap & PCI_EXP_LNKCAP_SLS; > > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); > > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, lnkctl); > > This starts a retrain; should we wait for training to complete? Yep, why not, with `pcie_retrain_link' now updated it's trivial, and we can then also verify the result (and do nothing about it except for reporting, as it's supposed to never happen, so let's just wait and see). > If we put most of this into a pcie_fix_link_train() (separated from > detecting the *need* to fix something), could it be made to look > sort of like this? (I suppose you'd want to return bool and rename > it that reads naturally, e.g., "pcie_link_forcibly_retrained()", > "pcie_link_retrained()", etc) Ah, I concluded to make it return `bool' independently, having not seen this suggestion of yours yet, so it seems like we're getting in sync, and likewise I renamed the function to `pcie_failed_link_retrain' already. > +void pcie_fix_link_train(struct pci_dev *dev) > +{ > + u16 lnkctl2; > + u32 lnkcap; > + bool linkup; > + > + pci_info(dev, "attempting link retrain at 2.5GT/s\n"); > + pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2); > + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; > + lnkctl2 |= PCI_EXP_LNKCTL2_TLS_2_5GT; > + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); > + > + linkup = pcie_retrain_link(dev, PCI_EXP_LNKSTA_DLLLA); > + if (!linkup) { > + pci_info(dev, "retraining failed\n"); > + return; > + } > + > + if (LNKCAP supports only 2.5GT/s) > + return; > + > + if (!pci_match_id(ids, dev)) > + return; > > Your comment said "if we know this is *safe*"; I can't remember if > pci_match_id() is there to avoid a known problem? It's the other way round, the intent is to lift the speed restriction and retrain for devices known to succeed and survive only. It cannot be universally guaranteed that such a retrain will succeed even if 2.5GT/s works, and moreover this piece is independent from the attempt to recover made immediately above and will also run where the firmware has clamped the speed of the link somehow, whether for this erratum or for another reason (remember that the speed clamp is sticky, so it will have survived our bus/interconnect hierarchy reset). In particular Pali has reported (in an earlier discussion concerning this erratum on the U-Boot mailing list) the existence of downstream devices that lock up when a link retrain is attempted, so we don't want to request one for an otherwise known-working link (retraining a dead link won't hurt of course regardless, because at worst it'll just stay in its non-working state, and we don't have a way to figure out what might be there anyway). Cf. <https://lists.denx.de/pipermail/u-boot/2021-November/467201.html>. > > +/* Same as above, but called for a downstream device. */ > > +static int pcie_upstream_link_retrain(struct pci_dev *dev) > > +{ > > + struct pci_dev *bridge; > > + > > + bridge = pci_upstream_bridge(dev); > > + if (bridge) > > + return pcie_downstream_link_retrain(bridge); > > + else > > + return -1; > > +} > > + > > static int pci_acs_enable; > > > > /** > > @@ -1148,8 +1274,8 @@ void pci_resume_bus(struct pci_bus *bus) > > > > static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout) > > { > > + int retrain = 0; > > int delay = 1; > > - u32 id; > > > > /* > > * After reset, the device should not silently discard config > > @@ -1163,21 +1289,37 @@ static int pci_dev_wait(struct pci_dev * > > * Command register instead of Vendor ID so we don't have to > > * contend with the CRS SV value. > > */ > > - pci_read_config_dword(dev, PCI_COMMAND, &id); > > - while (PCI_POSSIBLE_ERROR(id)) { > > + for (;;) { > > + u32 id; > > + > > + pci_read_config_dword(dev, PCI_COMMAND, &id); > > + if (!PCI_POSSIBLE_ERROR(id)) { > > + if (delay > PCI_RESET_WAIT) > > + pci_info(dev, "ready %dms after %s\n", > > + delay - 1, reset_type); > > + break; > > + } > > + > > if (delay > timeout) { > > pci_warn(dev, "not ready %dms after %s; giving up\n", > > delay - 1, reset_type); > > return -ENOTTY; > > } > > > > - if (delay > PCI_RESET_WAIT) > > + if (delay > PCI_RESET_WAIT) { > > + if (!retrain) { > > + retrain = 1; > > + if (pcie_upstream_link_retrain(dev) == 0) { > > + delay = 1; > > + continue; > > + } > > + } > > pci_info(dev, "not ready %dms after %s; waiting\n", > > delay - 1, reset_type); > > + } > > Thanks for fixing this in the reset path, too. Can we move this part > to a separate patch? It's related to the rest of the patch, but it > looks so much different that I think it would be easier to understand > by itself. I think making a system halfway-fixed would make little sense, but with the actual fix actually made last as you suggested I think this can be split off, because it'll make no functional change by itself. While at it I have verified that the initial value of `retrain' does not have to be changed for the compiler to optimise away any code related to it in the !PCI_QUIRKS case where `pcie_parent_link_retrain' gets optimised away too, so we're good here. I changed `retrain' to `bool' though and inverted the logic as I find it more natural this way. > I think I might try to fold the pcie_upstream_link_retrain() directly > in here because the "upstream link retrain" in the function name > doesn't really make sense in PCIe terms. Well, it does, as you can indeed request a retrain for an upstream port device. This is not however what this function does, so I agree it's confusing. I have replaced "upstream" with "parent" in the function name then to avoid this ambiguity. Otherwise I think factoring this piece out makes code more readable, as it's already quite deeply nested in blocks, and the compiler will inline it anyway, so I'd rather keep it as a separate function. With the observations made I'll be posting a rewritten patch series now. I realise there might still be issues outstanding, but this rewrite was already humongous enough and I think it deserves a second pair of eyeballs before massaging it any further. And last but not least, thank you for waiting, it was quite a stretch for me to fit this effort in among all the stuff currently on my table and all the unforeseen events. Maciej
Index: linux-macro/drivers/pci/pci.c =================================================================== --- linux-macro.orig/drivers/pci/pci.c +++ linux-macro/drivers/pci/pci.c @@ -859,6 +859,132 @@ int pci_wait_for_pending(struct pci_dev return 0; } +/* + * Retrain the link of a downstream PCIe port by hand if necessary. + * + * This is needed at least where a downstream port of the ASMedia ASM2824 + * Gen 3 switch is wired to the upstream port of the Pericom PI7C9X2G304 + * Gen 2 switch, and observed with the Delock Riser Card PCI Express x1 > + * 2 x PCIe x1 device, P/N 41433, plugged into the SiFive HiFive Unmatched + * board. + * + * In such a configuration the switches are supposed to negotiate the link + * speed of preferably 5.0GT/s, falling back to 2.5GT/s. However the link + * continues switching between the two speeds indefinitely and the data + * link layer never reaches the active state, with link training reported + * repeatedly active ~84% of the time. Forcing the target link speed to + * 2.5GT/s with the upstream ASM2824 device makes the two switches talk to + * each other correctly however. And more interestingly retraining with a + * higher target link speed afterwards lets the two successfully negotiate + * 5.0GT/s. + * + * With the ASM2824 we can rely on the otherwise optional Data Link Layer + * Link Active status bit and in the failed link training scenario it will + * be off along with the Link Bandwidth Management Status indicating that + * hardware has changed the link speed or width in an attempt to correct + * unreliable link operation. For a port that has been left unconnected + * both bits will be clear. So use this information to detect the problem + * rather than polling the Link Training bit and watching out for flips or + * at least the active status. + * + * Since the exact nature of the problem isn't known and in principle this + * could trigger where an ASM2824 device is downstream rather upstream, + * apply this erratum workaround to any downstream ports as long as they + * support Link Active reporting and have the Link Control 2 register. + * Restrict the speed to 2.5GT/s then with the Target Link Speed field, + * request a retrain and wait 200ms for the data link to go up. + * + * If this turns out successful and we know by the Vendor:Device ID it is + * safe to do so, then lift the restriction, letting the devices negotiate + * a higher speed. Also check for a similar 2.5GT/s speed restriction the + * firmware may have already arranged and lift it with ports that already + * report their data link being up. + * + * Return 0 if the link has been successfully retrained, otherwise -1. + */ +int pcie_downstream_link_retrain(struct pci_dev *dev) +{ + static const struct pci_device_id ids[] = { + { PCI_VDEVICE(ASMEDIA, 0x2824) }, /* ASMedia ASM2824 */ + {} + }; + u16 lnksta, lnkctl2; + + if (!pci_is_pcie(dev) || !pcie_downstream_port(dev) || + !pcie_cap_has_lnkctl2(dev) || !dev->link_active_reporting) + return -1; + + pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2); + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); + if ((lnksta & (PCI_EXP_LNKSTA_LBMS | PCI_EXP_LNKSTA_DLLLA)) == + PCI_EXP_LNKSTA_LBMS) { + unsigned long timeout; + u16 lnkctl; + + pci_info(dev, "broken device, retraining non-functional downstream link at 2.5GT/s\n"); + + pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnkctl); + lnkctl |= PCI_EXP_LNKCTL_RL; + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; + lnkctl2 |= PCI_EXP_LNKCTL2_TLS_2_5GT; + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, lnkctl); + /* + * Due to an erratum in some devices the Retrain Link bit + * needs to be cleared again manually to allow the link + * training to succeed. + */ + lnkctl &= ~PCI_EXP_LNKCTL_RL; + if (dev->clear_retrain_link) + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, + lnkctl); + + timeout = jiffies + PCIE_LINK_RETRAIN_TIMEOUT; + do { + pcie_capability_read_word(dev, PCI_EXP_LNKSTA, + &lnksta); + if (lnksta & PCI_EXP_LNKSTA_DLLLA) + break; + usleep_range(10000, 20000); + } while (time_before(jiffies, timeout)); + + if (!(lnksta & PCI_EXP_LNKSTA_DLLLA)) { + pci_info(dev, "retraining failed\n"); + return -1; + } + } + + if (IS_ENABLED(CONFIG_PCI_QUIRKS) && (lnksta & PCI_EXP_LNKSTA_DLLLA) && + (lnkctl2 & PCI_EXP_LNKCTL2_TLS) == PCI_EXP_LNKCTL2_TLS_2_5GT && + pci_match_id(ids, dev)) { + u32 lnkcap; + u16 lnkctl; + + pci_info(dev, "removing 2.5GT/s downstream link speed restriction\n"); + pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap); + pcie_capability_read_word(dev, PCI_EXP_LNKCTL, &lnkctl); + lnkctl |= PCI_EXP_LNKCTL_RL; + lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS; + lnkctl2 |= lnkcap & PCI_EXP_LNKCAP_SLS; + pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2); + pcie_capability_write_word(dev, PCI_EXP_LNKCTL, lnkctl); + } + + return 0; +} + +/* Same as above, but called for a downstream device. */ +static int pcie_upstream_link_retrain(struct pci_dev *dev) +{ + struct pci_dev *bridge; + + bridge = pci_upstream_bridge(dev); + if (bridge) + return pcie_downstream_link_retrain(bridge); + else + return -1; +} + static int pci_acs_enable; /** @@ -1148,8 +1274,8 @@ void pci_resume_bus(struct pci_bus *bus) static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout) { + int retrain = 0; int delay = 1; - u32 id; /* * After reset, the device should not silently discard config @@ -1163,21 +1289,37 @@ static int pci_dev_wait(struct pci_dev * * Command register instead of Vendor ID so we don't have to * contend with the CRS SV value. */ - pci_read_config_dword(dev, PCI_COMMAND, &id); - while (PCI_POSSIBLE_ERROR(id)) { + for (;;) { + u32 id; + + pci_read_config_dword(dev, PCI_COMMAND, &id); + if (!PCI_POSSIBLE_ERROR(id)) { + if (delay > PCI_RESET_WAIT) + pci_info(dev, "ready %dms after %s\n", + delay - 1, reset_type); + break; + } + if (delay > timeout) { pci_warn(dev, "not ready %dms after %s; giving up\n", delay - 1, reset_type); return -ENOTTY; } - if (delay > PCI_RESET_WAIT) + if (delay > PCI_RESET_WAIT) { + if (!retrain) { + retrain = 1; + if (pcie_upstream_link_retrain(dev) == 0) { + delay = 1; + continue; + } + } pci_info(dev, "not ready %dms after %s; waiting\n", delay - 1, reset_type); + } msleep(delay); delay *= 2; - pci_read_config_dword(dev, PCI_COMMAND, &id); } if (delay > PCI_RESET_WAIT) @@ -4894,6 +5036,8 @@ static bool pcie_wait_for_link_delay(str msleep(10); timeout -= 10; } + if (active && !ret) + ret = pcie_downstream_link_retrain(pdev) == 0; if (active && ret) msleep(delay); Index: linux-macro/drivers/pci/pci.h =================================================================== --- linux-macro.orig/drivers/pci/pci.h +++ linux-macro/drivers/pci/pci.h @@ -37,6 +37,7 @@ int pci_mmap_fits(struct pci_dev *pdev, enum pci_mmap_api mmap_api); bool pci_reset_supported(struct pci_dev *dev); +int pcie_downstream_link_retrain(struct pci_dev *dev); void pci_init_reset_methods(struct pci_dev *dev); int pci_bridge_secondary_bus_reset(struct pci_dev *dev); int pci_bus_error_reset(struct pci_dev *dev); Index: linux-macro/drivers/pci/probe.c =================================================================== --- linux-macro.orig/drivers/pci/probe.c +++ linux-macro/drivers/pci/probe.c @@ -2549,6 +2549,8 @@ void pci_device_add(struct pci_dev *dev, dma_set_max_seg_size(&dev->dev, 65536); dma_set_seg_boundary(&dev->dev, 0xffffffff); + pcie_downstream_link_retrain(dev); + /* Fix up broken headers */ pci_fixup_device(pci_fixup_header, dev);
Attempt to handle cases such as with a downstream port of the ASMedia ASM2824 PCIe switch where link training never completes and the link continues switching between speeds indefinitely with the data link layer never reaching the active state. It has been observed with a downstream port of the ASMedia ASM2824 Gen 3 switch wired to the upstream port of the Pericom PI7C9X2G304 Gen 2 switch, using a Delock Riser Card PCI Express x1 > 2 x PCIe x1 device, P/N 41433, wired to a SiFive HiFive Unmatched board. In this setup the switches are supposed to negotiate the link speed of preferably 5.0GT/s, falling back to 2.5GT/s. Instead the link continues oscillating between the two speeds, at the rate of 34-35 times per second, with link training reported repeatedly active ~84% of the time. Forcibly limiting the target link speed to 2.5GT/s with the upstream ASM2824 device however makes the two switches communicate correctly. Removing the speed restriction afterwards makes the two devices switch to 5.0GT/s then. Make use of these observations then and detect the inability to train the link, by checking for the Data Link Layer Link Active status bit being off while the Link Bandwidth Management Status indicating that hardware has changed the link speed or width in an attempt to correct unreliable link operation. Restrict the speed to 2.5GT/s then with the Target Link Speed field, request a retrain and wait 200ms for the data link to go up. If this turns out successful, then lift the restriction, letting the devices negotiate a higher speed. Also check for a 2.5GT/s speed restriction the firmware may have already arranged and lift it too with ports of devices known to continue working afterwards, currently the ASM2824 only, that already report their data link being up. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203022037020.56670@angie.orcam.me.uk/ Link: https://source.denx.de/u-boot/u-boot/-/commit/a398a51ccc68 --- No changes from v7. Changes from v6: - Regenerate against 6.3-rc5. - Shorten the lore.kernel.org archive link in the change description. Changes from v5: - Move from a quirk into PCI core and call at device probing, hot-plug, reset and resume. Keep the ASMedia part under CONFIG_PCI_QUIRKS. - Rely on `dev->link_active_reporting' rather than re-retrieving the capability. Changes from v4: - Remove <linux/bug.h> inclusion no longer needed. - Make the quirk generic based on probing device features rather than specific to the ASM2824 part only; take the Retrain Link bit erratum into account. - Still lift the 2.5GT/s speed restriction with the ASM2824 only. - Increase retrain timeout from 200ms to 1s (PCIE_LINK_RETRAIN_TIMEOUT). - Remove retrain success notification. - Use PCIe helpers rather than generic PCI functions throughout. - Trim down and update the wording of the change description for the switch from an ASM2824-specific to a generic fixup. Changes from v3: - Remove the <linux/pci_ids.h> entry for the ASM2824. Changes from v2: - Regenerate for 5.17-rc2 for a merge conflict. - Replace BUG_ON for a missing PCI Express capability with WARN_ON and an early return. Changes from v1: - Regenerate for a merge conflict. --- drivers/pci/pci.c | 154 ++++++++++++++++++++++++++++++++++++++++++++++++++-- drivers/pci/pci.h | 1 drivers/pci/probe.c | 2 3 files changed, 152 insertions(+), 5 deletions(-) linux-pcie-asm2824-manual-retrain.diff