diff mbox series

tehuti: Use dma_set_mask_and_coherent() and simplify code

Message ID b1efca5650e17c5e21cb880dbdf71c93e3c77f36.1641048461.git.christophe.jaillet@wanadoo.fr (mailing list archive)
State Accepted
Commit c95e078069bf9bfcb66272fac162c79be6c9170b
Delegated to: Netdev Maintainers
Headers show
Series tehuti: Use dma_set_mask_and_coherent() and simplify code | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 4 of 4 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 52 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Christophe JAILLET Jan. 1, 2022, 2:48 p.m. UTC 
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask_and_coherent() with a 64-bit mask
will never fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'pci_using_dac' can only be 1 after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly.

[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/net/ethernet/tehuti/tehuti.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Jan. 2, 2022, 12:30 p.m. UTC | #1 
Hello:

This patch was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Sat,  1 Jan 2022 15:48:25 +0100 you wrote:
> Use dma_set_mask_and_coherent() instead of unrolling it with some
> dma_set_mask()+dma_set_coherent_mask().
> 
> Moreover, as stated in [1], dma_set_mask_and_coherent() with a 64-bit mask
> will never fail if dev->dma_mask is non-NULL.
> So, if it fails, the 32 bits case will also fail for the same reason.
> 
> [...]

Here is the summary with links:
  - tehuti: Use dma_set_mask_and_coherent() and simplify code
    https://git.kernel.org/netdev/net-next/c/c95e078069bf

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
index 89bc1602661c..985073eba3bd 100644
--- a/drivers/net/ethernet/tehuti/tehuti.c
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -1884,10 +1884,10 @@  bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *ndev;
 	struct bdx_priv *priv;
-	int err, pci_using_dac, port;
 	unsigned long pciaddr;
 	u32 regionSize;
 	struct pci_nic *nic;
+	int err, port;
 
 	ENTER;
 
@@ -1900,16 +1900,10 @@  bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)			/* it triggers interrupt, dunno why. */
 		goto err_pci;		/* it's not a problem though */
 
-	if (!(err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) &&
-	    !(err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)))) {
-		pci_using_dac = 1;
-	} else {
-		if ((err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) ||
-		    (err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))) {
-			pr_err("No usable DMA configuration, aborting\n");
-			goto err_dma;
-		}
-		pci_using_dac = 0;
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (err) {
+		pr_err("No usable DMA configuration, aborting\n");
+		goto err_dma;
 	}
 
 	err = pci_request_regions(pdev, BDX_DRV_NAME);
@@ -1982,16 +1976,14 @@  bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		/* these fields are used for info purposes only
 		 * so we can have them same for all ports of the board */
 		ndev->if_port = port;
-		ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO
-		    | NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
-		    NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXCSUM
-		    ;
+		ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO |
+		    NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
+		    NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_RXCSUM |
+		    NETIF_F_HIGHDMA;
+
 		ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
 			NETIF_F_TSO | NETIF_F_HW_VLAN_CTAG_TX;
 
-		if (pci_using_dac)
-			ndev->features |= NETIF_F_HIGHDMA;
-
 	/************** priv ****************/
 		priv = nic->priv[port] = netdev_priv(ndev);