diff mbox series

[2/2] qede: Use 'skb_add_rx_frag()' instead of hand coding it

Message ID ee2f585f0fdb993366b1e33a01a4a268ba05e6f9.1617540100.git.christophe.jaillet@wanadoo.fr (mailing list archive)
State Accepted
Commit 7190e9d8e13164cdc38241095edcc392ed32f3ea
Delegated to: Netdev Maintainers
Headers show
Series [1/2] qede: Remove a erroneous ++ in 'qede_rx_build_jumbo()' | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 14 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Christophe JAILLET April 4, 2021, 12:42 p.m. UTC
Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
call which is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/net/ethernet/qlogic/qede/qede_fp.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

Comments

Manish Chopra April 5, 2021, 10:07 a.m. UTC | #1
> -----Original Message-----
> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Sent: Sunday, April 4, 2021 6:13 PM
> To: Ariel Elior <aelior@marvell.com>; GR-everest-linux-l2 <GR-everest-linux-
> l2@marvell.com>; davem@davemloft.net; kuba@kernel.org
> Cc: netdev@vger.kernel.org; linux-kernel@vger.kernel.org; kernel-
> janitors@vger.kernel.org; Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Subject: [EXT] [PATCH 2/2] qede: Use 'skb_add_rx_frag()' instead of hand coding
> it
> 
> External Email
> 
> ----------------------------------------------------------------------
> Some lines of code can be merged into an equivalent 'skb_add_rx_frag()'
> call which is less verbose.
> 
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---
>  drivers/net/ethernet/qlogic/qede/qede_fp.c | 7 ++-----
>  1 file changed, 2 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c
> b/drivers/net/ethernet/qlogic/qede/qede_fp.c
> index ee3e45e38cb7..8e150dd4f899 100644
> --- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
> +++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
> @@ -1209,12 +1209,9 @@ static int qede_rx_build_jumbo(struct qede_dev
> *edev,
>  		dma_unmap_page(rxq->dev, bd->mapping,
>  			       PAGE_SIZE, DMA_FROM_DEVICE);
> 
> -		skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
> -				   bd->data, rxq->rx_headroom, cur_size);
> +		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, bd->data,
> +				rxq->rx_headroom, cur_size, PAGE_SIZE);
> 
> -		skb->truesize += PAGE_SIZE;
> -		skb->data_len += cur_size;
> -		skb->len += cur_size;
>  		pkt_len -= cur_size;
>  	}
> 
> --
> 2.27.0

Thank you Christophe.
Acked-by: Manish Chopra <manishc@marvell.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c
index ee3e45e38cb7..8e150dd4f899 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -1209,12 +1209,9 @@  static int qede_rx_build_jumbo(struct qede_dev *edev,
 		dma_unmap_page(rxq->dev, bd->mapping,
 			       PAGE_SIZE, DMA_FROM_DEVICE);
 
-		skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
-				   bd->data, rxq->rx_headroom, cur_size);
+		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, bd->data,
+				rxq->rx_headroom, cur_size, PAGE_SIZE);
 
-		skb->truesize += PAGE_SIZE;
-		skb->data_len += cur_size;
-		skb->len += cur_size;
 		pkt_len -= cur_size;
 	}