diff mbox series

[v4,06/10] platform: x86: intel_cht_int33fe: Add connection for the DP alt mode

Message ID 20180911101044.44004-7-heikki.krogerus@linux.intel.com (mailing list archive)
State Deferred, archived
Delegated to: Andy Shevchenko
Headers show
Series usb: typec: A few more improvements for Intel CHT | expand

Commit Message

Heikki Krogerus Sept. 11, 2018, 10:10 a.m. UTC 
Adding a connection for the DisplayPort alternate mode.
PI3USB30532 is used for muxing the port to DisplayPort on
CHT platforms. The connection allows the alternate mode
device to get handle to the mux, and therefore make it
possible to use the USB Type-C connector as DisplayPort.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/platform/x86/intel_cht_int33fe.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index b0cef48f77af..424064187124 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -34,7 +34,7 @@  struct cht_int33fe_data {
 	struct i2c_client *fusb302;
 	struct i2c_client *pi3usb30532;
 	/* Contain a list-head must be per device */
-	struct device_connection connections[4];
+	struct device_connection connections[5];
 };
 
 /*
@@ -181,8 +181,11 @@  static int cht_int33fe_probe(struct i2c_client *client)
 	data->connections[1].endpoint[1] = "i2c-pi3usb30532";
 	data->connections[1].id = "typec-mux";
 	data->connections[2].endpoint[0] = "i2c-fusb302";
-	data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
-	data->connections[2].id = "usb-role-switch";
+	data->connections[2].endpoint[1] = "i2c-pi3usb30532";
+	data->connections[2].id = "idff01m01";
+	data->connections[3].endpoint[0] = "i2c-fusb302";
+	data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
+	data->connections[3].id = "usb-role-switch";
 
 	device_connections_add(data->connections);