@@ -150,3 +150,72 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
+
+Date: December 2019
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show system static topology identification
+ like system's static I2C topology, number and type of FPGA
+ devices within the system and so on.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
+
+ The files are read only.
+
+Date: December 2019
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: These files show the system reset causes, as following: reset
+ due to AC power failure, reset invoked from software by
+ assertion reset signal through CPLD. reset caused by signal
+ asserted by SOC through ACPI register, reset invoked from
+ software by assertion power off signal through CPLD.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
+
+ The files are read only.
+
+Date: December 2019
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file allows to retain ASIC up during PCIe root complex
+ reset, when attribute is set 1.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
+
+ The file is read/write.
+
+Date: December 2019
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file allows to overwrite system VPD hardware wrtie
+ protection when attribute is set 1.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
+
+ The file is read/write.
+
+Date: December 2019
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file exposes the configuration update status of burnable
+ voltage regulator devices. The status values are as following:
+ 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
+
+ The file is read only.
+
+Date: December 2019
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimpmellanox.com>
+Description: This file exposes the firmware version of burnable voltage
+ regulator devices.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
+
+ The file is read only.
Add documentation for the new attributes for: - Exposing reset causes types asserted by: platform reset, SoC reset, AC power failure, software power off request. - Setting and removing system VPD (EEPROM) hardware write protection. - Voltage regulator devices configuration update status and firmware version. - Setting PCIe ASIC reset to disable or enable state during PCIe root complex reset. - System static topology identification, like system's static I2C topology, number and type of FPGA devices within the system and so on. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> --- Documentation/ABI/stable/sysfs-driver-mlxreg-io | 69 +++++++++++++++++++++++++ 1 file changed, 69 insertions(+)