@@ -598,7 +598,7 @@ config X86_INTEL_MID
select I2C
select DW_APB_TIMER
select APB_TIMER
- select INTEL_SCU_IPC
+ select INTEL_SCU_PCI
select MFD_INTEL_MSIC
---help---
Select to build a kernel capable of supporting Intel MID (Mobile
@@ -2,6 +2,7 @@
#ifndef _ASM_X86_INTEL_SCU_IPC_H_
#define _ASM_X86_INTEL_SCU_IPC_H_
+#include <linux/ioport.h>
#include <linux/notifier.h>
#define IPCMSG_INDIRECT_READ 0x02
@@ -19,6 +20,23 @@
#define IPC_CMD_VRTC_SETTIME 1 /* Set time */
#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */
+struct device;
+struct intel_scu_ipc_dev;
+
+/**
+ * struct intel_scu_ipc_pdata - Platform data for SCU IPC
+ * @mem: Base address of SCU IPC MMIO registers
+ * @irq: The IRQ number used for SCU (optional)
+ */
+struct intel_scu_ipc_pdata {
+ struct resource mem;
+ int irq;
+};
+
+struct intel_scu_ipc_dev *
+intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_pdata *pdata);
+
/* Read single register */
int intel_scu_ipc_ioread8(u16 addr, u8 *data);
@@ -593,7 +593,7 @@ config INTEL_SOC_PMIC_MRFLD
tristate "Support for Intel Merrifield Basin Cove PMIC"
depends on GPIOLIB
depends on ACPI
- depends on INTEL_SCU_IPC
+ depends on INTEL_SCU
select MFD_CORE
select REGMAP_IRQ
help
@@ -625,7 +625,7 @@ config MFD_INTEL_LPSS_PCI
config MFD_INTEL_MSIC
bool "Intel MSIC"
- depends on INTEL_SCU_IPC
+ depends on INTEL_SCU
select MFD_CORE
help
Select this option to enable access to Intel MSIC (Avatele
@@ -1287,7 +1287,7 @@ config INTEL_MFLD_THERMAL
config INTEL_MID_POWER_BUTTON
tristate "power button driver for Intel MID platforms"
- depends on INTEL_SCU_IPC && INPUT
+ depends on INTEL_SCU && INPUT
help
This driver handles the power button on the Intel MID platforms.
@@ -1334,17 +1334,25 @@ config INTEL_PUNIT_IPC
which is used to bridge the communications between kernel and P-Unit.
config INTEL_SCU_IPC
- bool "Intel SCU IPC Support"
+ bool
+
+config INTEL_SCU
+ bool
+ select INTEL_SCU_IPC
+
+config INTEL_SCU_PCI
+ bool "Intel SCU PCI driver"
depends on X86_INTEL_MID
- default y
- ---help---
- IPC is used to bridge the communications between kernel and SCU on
- some embedded Intel x86 platforms. This is not needed for PC-type
- machines.
+ select INTEL_SCU
+ help
+ This driver is used to bridge the communications between kernel
+ and SCU on some embedded Intel x86 platforms. It also creates
+ devices that are connected to the SoC through the SCU. This is
+ not needed for PC-type machines.
config INTEL_SCU_IPC_UTIL
tristate "Intel SCU IPC utility driver"
- depends on INTEL_SCU_IPC
+ depends on INTEL_SCU
---help---
The IPC Util driver provides an interface with the SCU enabling
low level access for debug work and updating the firmware. Say
@@ -141,6 +141,7 @@ obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
+obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o
obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \
intel_telemetry_pltdrv.o \
intel_telemetry_debugfs.o
@@ -18,11 +18,10 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/sfi.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
-#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>
/* IPC defines the following message types */
@@ -55,14 +54,13 @@
#define IPC_IOC 0x100 /* IPC command register IOC bit */
struct intel_scu_ipc_dev {
- struct device *dev;
+ struct device dev;
+ struct resource mem;
+ int irq;
void __iomem *ipc_base;
struct completion cmd_complete;
- u8 irq_mode;
};
-static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
-
#define IPC_STATUS 0x04
#define IPC_STATUS_IRQ BIT(2)
#define IPC_STATUS_ERR BIT(1)
@@ -78,8 +76,14 @@ static struct intel_scu_ipc_dev ipcdev; /* Only one for now */
/* Timeout in jiffies */
#define IPC_TIMEOUT (3 * HZ)
+static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */
static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
+static struct class intel_scu_ipc_class = {
+ .name = "intel_scu_ipc",
+ .owner = THIS_MODULE,
+};
+
/*
* Send ipc command
* Command Register (Write Only):
@@ -143,7 +147,7 @@ static inline int busy_loop(struct intel_scu_ipc_dev *scu)
usleep_range(50, 100);
} while (time_before(jiffies, end));
- dev_err(scu->dev, "IPC timed out");
+ dev_err(&scu->dev, "IPC timed out");
return -ETIMEDOUT;
}
@@ -153,7 +157,7 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
int status;
if (!wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT)) {
- dev_err(scu->dev, "IPC timed out\n");
+ dev_err(&scu->dev, "IPC timed out\n");
return -ETIMEDOUT;
}
@@ -166,13 +170,13 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
{
- return scu->irq_mode ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
+ return scu->irq > 0 ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
}
/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
{
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
int nc;
u32 offset = 0;
int err;
@@ -182,11 +186,11 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
memset(cbuf, 0, sizeof(cbuf));
mutex_lock(&ipclock);
-
- if (scu->dev == NULL) {
+ if (!ipcdev) {
mutex_unlock(&ipclock);
return -ENODEV;
}
+ scu = ipcdev;
for (nc = 0; nc < count; nc++, offset += 2) {
cbuf[offset] = addr[nc];
@@ -326,14 +330,15 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register);
*/
int intel_scu_ipc_simple_command(int cmd, int sub)
{
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
int err;
mutex_lock(&ipclock);
- if (scu->dev == NULL) {
+ if (!ipcdev) {
mutex_unlock(&ipclock);
return -ENODEV;
}
+ scu = ipcdev;
ipc_command(scu, sub << 12 | cmd);
err = intel_scu_ipc_check_status(scu);
mutex_unlock(&ipclock);
@@ -356,14 +361,15 @@ EXPORT_SYMBOL(intel_scu_ipc_simple_command);
int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
u32 *out, int outlen)
{
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
int i, err;
mutex_lock(&ipclock);
- if (scu->dev == NULL) {
+ if (!ipcdev) {
mutex_unlock(&ipclock);
return -ENODEV;
}
+ scu = ipcdev;
for (i = 0; i < inlen; i++)
ipc_data_writel(scu, *in++, 4 * i);
@@ -399,61 +405,113 @@ static irqreturn_t ioc(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static void intel_scu_ipc_release(struct device *dev)
+{
+ struct intel_scu_ipc_dev *scu;
+
+ scu = container_of(dev, struct intel_scu_ipc_dev, dev);
+ if (scu->irq > 0)
+ free_irq(scu->irq, scu);
+ iounmap(scu->ipc_base);
+ release_mem_region(scu->mem.start, resource_size(&scu->mem));
+ kfree(scu);
+}
+
/**
- * ipc_probe - probe an Intel SCU IPC
- * @pdev: the PCI device matching
- * @id: entry in the match table
+ * intel_scu_ipc_register() - Register SCU IPC device
+ * @parent: Parent device
+ * @pdata: Platform specific data for SCU IPC
*
- * Enable and install an intel SCU IPC. This appears in the PCI space
- * but uses some hard coded addresses as well.
+ * Call this function to register SCU IPC mechanism under @parent.
+ * Returns pointer to the new SCU IPC device or ERR_PTR() in case of
+ * failure.
*/
-static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+struct intel_scu_ipc_dev *
+intel_scu_ipc_register(struct device *parent,
+ const struct intel_scu_ipc_pdata *pdata)
{
int err;
- struct intel_scu_ipc_dev *scu = &ipcdev;
+ struct intel_scu_ipc_dev *scu;
+ void __iomem *ipc_base;
- if (scu->dev) /* We support only one SCU */
- return -EBUSY;
+ mutex_lock(&ipclock);
+ /* We support only one IPC */
+ if (ipcdev) {
+ err = -EBUSY;
+ goto err_unlock;
+ }
- err = pcim_enable_device(pdev);
- if (err)
- return err;
+ scu = kzalloc(sizeof(*scu), GFP_KERNEL);
+ if (!scu) {
+ err = -ENOMEM;
+ goto err_unlock;
+ }
- err = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
- if (err)
- return err;
+ scu->dev.parent = parent;
+ scu->dev.class = &intel_scu_ipc_class;
+ scu->dev.release = intel_scu_ipc_release;
+ dev_set_name(&scu->dev, "intel_scu_ipc");
+ if (!request_mem_region(pdata->mem.start, resource_size(&pdata->mem),
+ "intel_scu_ipc")) {
+ err = -EBUSY;
+ goto err_free;
+ }
+
+ ipc_base = ioremap(pdata->mem.start, resource_size(&pdata->mem));
+ if (!ipc_base) {
+ err = -ENOMEM;
+ goto err_release;
+ }
+
+ scu->ipc_base = ipc_base;
+ scu->mem = pdata->mem;
+ scu->irq = pdata->irq;
init_completion(&scu->cmd_complete);
- scu->ipc_base = pcim_iomap_table(pdev)[0];
+ if (scu->irq > 0) {
+ err = request_irq(scu->irq, ioc, 0, "intel_scu_ipc", scu);
+ if (err)
+ goto err_unmap;
+ }
- err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc",
- scu);
- if (err)
- return err;
+ /*
+ * After this point intel_scu_ipc_release() takes care of
+ * releasing the SCU IPC resources once refcount drops to zero.
+ */
+ err = device_register(&scu->dev);
+ if (err) {
+ put_device(&scu->dev);
+ goto err_unlock;
+ }
/* Assign device at last */
- scu->dev = &pdev->dev;
+ ipcdev = scu;
+ mutex_unlock(&ipclock);
- intel_scu_devices_create();
+ return scu;
- pci_set_drvdata(pdev, scu);
- return 0;
+err_unmap:
+ iounmap(ipc_base);
+err_release:
+ release_mem_region(pdata->mem.start, resource_size(&pdata->mem));
+err_free:
+ kfree(scu);
+err_unlock:
+ mutex_unlock(&ipclock);
+
+ return ERR_PTR(err);
}
+EXPORT_SYMBOL_GPL(intel_scu_ipc_register);
-static const struct pci_device_id pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x080e) },
- { PCI_VDEVICE(INTEL, 0x08ea) },
- { PCI_VDEVICE(INTEL, 0x11a0) },
- {}
-};
+static int __init intel_scu_ipc_init(void)
+{
+ return class_register(&intel_scu_ipc_class);
+}
+subsys_initcall(intel_scu_ipc_init);
-static struct pci_driver ipc_driver = {
- .driver = {
- .suppress_bind_attrs = true,
- },
- .name = "intel_scu_ipc",
- .id_table = pci_ids,
- .probe = ipc_probe,
-};
-builtin_pci_driver(ipc_driver);
+static void __exit intel_scu_ipc_exit(void)
+{
+ class_unregister(&intel_scu_ipc_class);
+}
+module_exit(intel_scu_ipc_exit);
new file mode 100644
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI driver for the Intel SCU.
+ *
+ * Copyright (C) 2008-2010, 2015, 2020 Intel Corporation
+ * Authors: Sreedhara DS (sreedhara.ds@intel.com)
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_scu_ipc.h>
+
+static int intel_scu_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct intel_scu_ipc_pdata pdata = {};
+ struct intel_scu_ipc_dev *scu;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pdata.mem = pdev->resource[0];
+ pdata.irq = pdev->irq;
+
+ scu = intel_scu_ipc_register(&pdev->dev, &pdata);
+ if (IS_ERR(scu))
+ return PTR_ERR(scu);
+
+ intel_scu_devices_create();
+ return 0;
+}
+
+static const struct pci_device_id pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x080e) },
+ { PCI_VDEVICE(INTEL, 0x08ea) },
+ { PCI_VDEVICE(INTEL, 0x11a0) },
+ {}
+};
+
+static struct pci_driver intel_scu_pci_driver = {
+ .driver = {
+ .suppress_bind_attrs = true,
+ },
+ .name = "intel_scu",
+ .id_table = pci_ids,
+ .probe = intel_scu_pci_probe,
+};
+
+builtin_pci_driver(intel_scu_pci_driver);