Message ID | 20201216013857.360987-22-pobrn@protonmail.com (mailing list archive) |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | platform/x86: ideapad-laptop: cleanup, keyboard backlight and "always on USB charging" control support, reenable touchpad control | expand |
Hi, On 12/16/20 2:40 AM, Barnabás Pőcze wrote: > On certain models it is possible to control/query the keyboard backlight > via the SALS/HALS ACPI methods. Add support for that, and register an LED > class device to expose this functionality. > Tested on: Lenovo YOGA 520-14IKB 80X8 > > Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> > > diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c > index 075056075b2d..a43574e65f61 100644 > --- a/drivers/platform/x86/ideapad-laptop.c > +++ b/drivers/platform/x86/ideapad-laptop.c > @@ -9,6 +9,7 @@ > #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > #include <acpi/video.h> > +#include <dt-bindings/leds/common.h> > #include <linux/acpi.h> > #include <linux/backlight.h> > #include <linux/bitops.h> > @@ -22,6 +23,7 @@ > #include <linux/input/sparse-keymap.h> > #include <linux/jiffies.h> > #include <linux/kernel.h> > +#include <linux/leds.h> > #include <linux/module.h> > #include <linux/platform_device.h> > #include <linux/rfkill.h> I guess you need a "depends on LEDS_CLASS" in the Kconfig for this? > @@ -56,12 +58,16 @@ enum { > }; > > enum { > + HALS_KBD_BL_SUPPORT_BIT = 4, > + HALS_KBD_BL_STATE_BIT = 5, > HALS_FNLOCK_SUPPORT_BIT = 9, > HALS_FNLOCK_STATE_BIT = 10, > HALS_HOTKEYS_PRIMARY_BIT = 11, > }; > > enum { > + SALS_KBD_BL_ON = 0x8, > + SALS_KBD_BL_OFF = 0x9, > SALS_FNLOCK_ON = 0xe, > SALS_FNLOCK_OFF = 0xf, > }; > @@ -114,6 +120,11 @@ struct ideapad_private { > fn_lock : 1, > hw_rfkill_switch : 1; > } features; > + struct { > + bool initialized; > + struct led_classdev led; > + unsigned int last_brightness; > + } kbd_bl; > }; > > static bool no_bt_rfkill; > @@ -934,6 +945,110 @@ static void ideapad_backlight_notify_brightness(struct ideapad_private *priv) > backlight_force_update(priv->blightdev, BACKLIGHT_UPDATE_HOTKEY); > } > > +/* > + * keyboard backlight > + */ > +static int ideapad_kbd_bl_brightness_get(struct ideapad_private *priv) > +{ > + unsigned long hals; > + int err; > + > + err = eval_hals(priv->adev->handle, &hals); > + if (err) > + return err; > + > + return test_bit(HALS_KBD_BL_STATE_BIT, &hals); > +} > + > +static enum led_brightness ideapad_kbd_bl_led_cdev_brightness_get(struct led_classdev *led_cdev) > +{ > + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led); > + > + return ideapad_kbd_bl_brightness_get(priv); > +} > + > +static int ideapad_kbd_bl_brightness_set(struct ideapad_private *priv, unsigned int brightness) > +{ > + int err; > + > + err = eval_sals(priv->adev->handle, > + brightness ? SALS_KBD_BL_ON : SALS_KBD_BL_OFF); > + if (err) > + return err; > + > + priv->kbd_bl.last_brightness = brightness; > + > + return 0; > +} > + > +static int ideapad_kbd_bl_led_cdev_brightness_set(struct led_classdev *led_cdev, > + enum led_brightness brightness) > +{ > + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led); > + > + return ideapad_kbd_bl_brightness_set(priv, brightness); > +} > + > +static void ideapad_kbd_bl_notify(struct ideapad_private *priv) > +{ > + int brightness; > + > + if (!priv->kbd_bl.initialized) > + return; > + > + brightness = ideapad_kbd_bl_brightness_get(priv); > + if (brightness < 0) > + return; > + > + if (brightness == priv->kbd_bl.last_brightness) > + return; > + > + priv->kbd_bl.last_brightness = brightness; > + > + led_classdev_notify_brightness_hw_changed(&priv->kbd_bl.led, brightness); > +} So I guess that there is some hotkey combo on the laptops keyboards which directly changes the state of the kbd backlight "underneath" us and that is why this is necessary ? > + > +static int ideapad_kbd_bl_init(struct ideapad_private *priv) > +{ > + unsigned long hals; > + int err; > + > + err = eval_hals(priv->adev->handle, &hals); > + if (err) > + return err; So you are checking for presence of the HALS method here, but not for SALS which is being used in ideapad_kbd_bl_led_cdev_brightness_set() and you are needlessly re-evaluating HALS here. Would it not be better to add a features.kbd_bl flag and set that from ideapad_check_features() as done for other features ? That would avoid an extra evaluation of the HALS method and also check for SALS. You can then still unconditionally call this function but just bail with -ENODEV if the feature flag is not set. Otherwise this looks good to me. Regards, Hans > + > + if (!test_bit(HALS_KBD_BL_SUPPORT_BIT, &hals)) > + return -ENODEV; > + > + err = ideapad_kbd_bl_brightness_get(priv); > + if (err < 0) > + return err; > + > + priv->kbd_bl.last_brightness = err; > + > + priv->kbd_bl.led.name = "platform::" LED_FUNCTION_KBD_BACKLIGHT; > + priv->kbd_bl.led.max_brightness = 1; > + priv->kbd_bl.led.brightness_get = ideapad_kbd_bl_led_cdev_brightness_get; > + priv->kbd_bl.led.brightness_set_blocking = ideapad_kbd_bl_led_cdev_brightness_set; > + priv->kbd_bl.led.flags = LED_BRIGHT_HW_CHANGED; > + > + err = led_classdev_register(&priv->platform_device->dev, &priv->kbd_bl.led); > + if (err) > + return err; > + > + priv->kbd_bl.initialized = true; > + > + return 0; > +} > + > +static void ideapad_kbd_bl_exit(struct ideapad_private *priv) > +{ > + if (!priv->kbd_bl.initialized) > + return; > + > + led_classdev_unregister(&priv->kbd_bl.led); > +} > + > /* > * module init/exit > */ > @@ -1000,8 +1115,9 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) > * Some IdeaPads report event 1 every ~20 > * seconds while on battery power; some > * report this when changing to/from tablet > - * mode. Squelch this event. > + * mode. > */ > + ideapad_kbd_bl_notify(priv); > break; > default: > dev_warn(&priv->platform_device->dev, > @@ -1101,6 +1217,11 @@ static int ideapad_acpi_add(struct platform_device *pdev) > if (err) > goto input_failed; > > + err = ideapad_kbd_bl_init(priv); > + if (err && err != -ENODEV) > + dev_warn(&pdev->dev, > + "Could not register keyboard backlight led: %d\n", err); > + > /* > * On some models without a hw-switch (the yoga 2 13 at least) > * VPCCMD_W_RF must be explicitly set to 1 for the wifi to work. > @@ -1161,6 +1282,7 @@ static int ideapad_acpi_add(struct platform_device *pdev) > for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) > ideapad_unregister_rfkill(priv, i); > > + ideapad_kbd_bl_exit(priv); > ideapad_input_exit(priv); > > input_failed: > @@ -1188,6 +1310,7 @@ static int ideapad_acpi_remove(struct platform_device *pdev) > for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) > ideapad_unregister_rfkill(priv, i); > > + ideapad_kbd_bl_exit(priv); > ideapad_input_exit(priv); > ideapad_debugfs_exit(priv); > ideapad_sysfs_exit(priv); >
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 075056075b2d..a43574e65f61 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -9,6 +9,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <acpi/video.h> +#include <dt-bindings/leds/common.h> #include <linux/acpi.h> #include <linux/backlight.h> #include <linux/bitops.h> @@ -22,6 +23,7 @@ #include <linux/input/sparse-keymap.h> #include <linux/jiffies.h> #include <linux/kernel.h> +#include <linux/leds.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/rfkill.h> @@ -56,12 +58,16 @@ enum { }; enum { + HALS_KBD_BL_SUPPORT_BIT = 4, + HALS_KBD_BL_STATE_BIT = 5, HALS_FNLOCK_SUPPORT_BIT = 9, HALS_FNLOCK_STATE_BIT = 10, HALS_HOTKEYS_PRIMARY_BIT = 11, }; enum { + SALS_KBD_BL_ON = 0x8, + SALS_KBD_BL_OFF = 0x9, SALS_FNLOCK_ON = 0xe, SALS_FNLOCK_OFF = 0xf, }; @@ -114,6 +120,11 @@ struct ideapad_private { fn_lock : 1, hw_rfkill_switch : 1; } features; + struct { + bool initialized; + struct led_classdev led; + unsigned int last_brightness; + } kbd_bl; }; static bool no_bt_rfkill; @@ -934,6 +945,110 @@ static void ideapad_backlight_notify_brightness(struct ideapad_private *priv) backlight_force_update(priv->blightdev, BACKLIGHT_UPDATE_HOTKEY); } +/* + * keyboard backlight + */ +static int ideapad_kbd_bl_brightness_get(struct ideapad_private *priv) +{ + unsigned long hals; + int err; + + err = eval_hals(priv->adev->handle, &hals); + if (err) + return err; + + return test_bit(HALS_KBD_BL_STATE_BIT, &hals); +} + +static enum led_brightness ideapad_kbd_bl_led_cdev_brightness_get(struct led_classdev *led_cdev) +{ + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led); + + return ideapad_kbd_bl_brightness_get(priv); +} + +static int ideapad_kbd_bl_brightness_set(struct ideapad_private *priv, unsigned int brightness) +{ + int err; + + err = eval_sals(priv->adev->handle, + brightness ? SALS_KBD_BL_ON : SALS_KBD_BL_OFF); + if (err) + return err; + + priv->kbd_bl.last_brightness = brightness; + + return 0; +} + +static int ideapad_kbd_bl_led_cdev_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led); + + return ideapad_kbd_bl_brightness_set(priv, brightness); +} + +static void ideapad_kbd_bl_notify(struct ideapad_private *priv) +{ + int brightness; + + if (!priv->kbd_bl.initialized) + return; + + brightness = ideapad_kbd_bl_brightness_get(priv); + if (brightness < 0) + return; + + if (brightness == priv->kbd_bl.last_brightness) + return; + + priv->kbd_bl.last_brightness = brightness; + + led_classdev_notify_brightness_hw_changed(&priv->kbd_bl.led, brightness); +} + +static int ideapad_kbd_bl_init(struct ideapad_private *priv) +{ + unsigned long hals; + int err; + + err = eval_hals(priv->adev->handle, &hals); + if (err) + return err; + + if (!test_bit(HALS_KBD_BL_SUPPORT_BIT, &hals)) + return -ENODEV; + + err = ideapad_kbd_bl_brightness_get(priv); + if (err < 0) + return err; + + priv->kbd_bl.last_brightness = err; + + priv->kbd_bl.led.name = "platform::" LED_FUNCTION_KBD_BACKLIGHT; + priv->kbd_bl.led.max_brightness = 1; + priv->kbd_bl.led.brightness_get = ideapad_kbd_bl_led_cdev_brightness_get; + priv->kbd_bl.led.brightness_set_blocking = ideapad_kbd_bl_led_cdev_brightness_set; + priv->kbd_bl.led.flags = LED_BRIGHT_HW_CHANGED; + + err = led_classdev_register(&priv->platform_device->dev, &priv->kbd_bl.led); + if (err) + return err; + + priv->kbd_bl.initialized = true; + + return 0; +} + +static void ideapad_kbd_bl_exit(struct ideapad_private *priv) +{ + if (!priv->kbd_bl.initialized) + return; + + led_classdev_unregister(&priv->kbd_bl.led); +} + /* * module init/exit */ @@ -1000,8 +1115,9 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) * Some IdeaPads report event 1 every ~20 * seconds while on battery power; some * report this when changing to/from tablet - * mode. Squelch this event. + * mode. */ + ideapad_kbd_bl_notify(priv); break; default: dev_warn(&priv->platform_device->dev, @@ -1101,6 +1217,11 @@ static int ideapad_acpi_add(struct platform_device *pdev) if (err) goto input_failed; + err = ideapad_kbd_bl_init(priv); + if (err && err != -ENODEV) + dev_warn(&pdev->dev, + "Could not register keyboard backlight led: %d\n", err); + /* * On some models without a hw-switch (the yoga 2 13 at least) * VPCCMD_W_RF must be explicitly set to 1 for the wifi to work. @@ -1161,6 +1282,7 @@ static int ideapad_acpi_add(struct platform_device *pdev) for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) ideapad_unregister_rfkill(priv, i); + ideapad_kbd_bl_exit(priv); ideapad_input_exit(priv); input_failed: @@ -1188,6 +1310,7 @@ static int ideapad_acpi_remove(struct platform_device *pdev) for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) ideapad_unregister_rfkill(priv, i); + ideapad_kbd_bl_exit(priv); ideapad_input_exit(priv); ideapad_debugfs_exit(priv); ideapad_sysfs_exit(priv);
On certain models it is possible to control/query the keyboard backlight via the SALS/HALS ACPI methods. Add support for that, and register an LED class device to expose this functionality. Tested on: Lenovo YOGA 520-14IKB 80X8 Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>