@@ -1,7 +1,7 @@
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file shows ASIC health status. The possible values are:
0 - health failed, 2 - health OK, 3 - ASIC in booting state.
@@ -11,7 +11,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD versions have been burned
on carrier and switch boards.
@@ -20,7 +20,7 @@ Description: These files show with which CPLD versions have been burned
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
Date: December 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file shows the system fans direction:
forward direction - relevant bit is set 0;
reversed direction - relevant bit is set 1.
@@ -30,7 +30,7 @@ Description: This file shows the system fans direction:
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD versions have been burned
on LED or Gearbox board.
@@ -39,7 +39,7 @@ Description: These files show with which CPLD versions have been burned
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files enable and disable the access to the JTAG domain.
By default access to the JTAG domain is disabled.
@@ -48,7 +48,7 @@ Description: These files enable and disable the access to the JTAG domain.
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows iio devices selection.
Attribute select_iio can be written with 0 or with 1. It
@@ -62,7 +62,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files allow asserting system power cycling, switching
power supply units on and off and system's main power domain
shutdown.
@@ -89,7 +89,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
Date: June 2018
KernelVersion: 4.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset cause, as following: power
auxiliary outage or power refresh, ASIC thermal shutdown, halt,
hotswap, watchdog, firmware reset, long press power button,
@@ -106,7 +106,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset cause, as following: ComEx
power fail, reset from ComEx, system platform reset, reset
due to voltage monitor devices upgrade failure,
@@ -119,7 +119,7 @@ Description: These files show the system reset cause, as following: ComEx
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
Date: November 2018
KernelVersion: 5.0
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD versions have been burned
on LED board.
@@ -133,7 +133,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
Date: June 2019
KernelVersion: 5.3
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset cause, as following:
COMEX thermal shutdown; wathchdog power off or reset was derived
by one of the next components: COMEX, switch board or by Small Form
@@ -148,7 +148,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show system static topology identification
like system's static I2C topology, number and type of FPGA
devices within the system and so on.
@@ -161,7 +161,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show the system reset causes, as following: reset
due to AC power failure, reset invoked from software by
assertion reset signal through CPLD. reset caused by signal
@@ -173,7 +173,7 @@ Description: These files show the system reset causes, as following: reset
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to retain ASIC up during PCIe root complex
reset, when attribute is set 1.
@@ -182,7 +182,7 @@ Description: This file allows to retain ASIC up during PCIe root complex
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to overwrite system VPD hardware write
protection when attribute is set 1.
@@ -191,7 +191,7 @@ Description: This file allows to overwrite system VPD hardware write
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file exposes the configuration update status of burnable
voltage regulator devices. The status values are as following:
0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
@@ -201,7 +201,7 @@ Description: This file exposes the configuration update status of burnable
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
Date: January 2020
KernelVersion: 5.6
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file exposes the firmware version of burnable voltage
regulator devices.
@@ -217,7 +217,7 @@ What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
Date: July 2020
KernelVersion: 5.9
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: These files show with which CPLD part numbers and minor
versions have been burned CPLD devices equipped on a
system.
@@ -471,7 +471,7 @@ Description: These files provide the maximum powered required for line card
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
Date: May 2022
KernelVersion: 5.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to reset PHY 88E1548 when attribute is set 0
due to some abnormal PHY behavior.
Expected behavior:
@@ -483,7 +483,7 @@ Description: This file allows to reset PHY 88E1548 when attribute is set 0
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
Date: May 2022
KernelVersion: 5.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file allows to reset ASIC MT52132 when attribute is set 0
due to some abnormal ASIC behavior.
Expected behavior:
@@ -495,7 +495,7 @@ Description: This file allows to reset ASIC MT52132 when attribute is set 0
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
Date: May 2022
KernelVersion: 5.19
-Contact: Vadim Pasternak <vadimpmellanox.com>
+Contact: Vadim Pasternak <vadimp@nvidia.com>
Description: This file shows QSFP ports power status. The value is set to 0
when one of any QSFP ports is plugged. The value is set to 1 when
there are no any QSFP ports are plugged.
Fix e-mail in contact fields. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> --- .../ABI/stable/sysfs-driver-mlxreg-io | 42 +++++++++---------- 1 file changed, 21 insertions(+), 21 deletions(-)