@@ -874,19 +874,37 @@ static const struct platform_device_info lenovo_yoga_tab2_830_1050_pdevs[] __ini
#define LENOVO_YOGA_TAB2_830_1050_CODEC_NAME "spi-10WM5102:00"
-static struct gpiod_lookup_table lenovo_yoga_tab2_830_1050_codec_gpios = {
- .dev_id = LENOVO_YOGA_TAB2_830_1050_CODEC_NAME,
- .table = {
- GPIO_LOOKUP("gpio_crystalcove", 3, "reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("INT33FC:01", 23, "wlf,ldoena", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("arizona", 2, "wlf,spkvdd-ena", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("arizona", 4, "wlf,micd-pol", GPIO_ACTIVE_LOW),
- { }
- },
+static const struct software_node lenovo_yoga_tab2_830_1050_crystalcove = {
+ .name = "gpio_crystalcove",
+};
+
+static const struct software_node lenovo_yoga_tab2_830_1050_arizona = {
+ .name = "arizona",
+};
+
+static const struct property_entry lenovo_yoga_tab2_830_1050_wm1502_props[] = {
+ PROPERTY_ENTRY_GPIO("reset-gpios",
+ &lenovo_yoga_tab2_830_1050_crystalcove,
+ 3, GPIO_ACTIVE_HIGH),
+ PROPERTY_ENTRY_GPIO("wlf,ldoena-gpios",
+ &int33fc_gpiochip_nodes[1], 23, GPIO_ACTIVE_HIGH),
+ PROPERTY_ENTRY_GPIO("wlf,spkvdd-ena-gpios",
+ &lenovo_yoga_tab2_830_1050_arizona,
+ 2, GPIO_ACTIVE_HIGH),
+ PROPERTY_ENTRY_GPIO("wlf,micd-pol-gpios",
+ &lenovo_yoga_tab2_830_1050_arizona,
+ 4, GPIO_ACTIVE_HIGH),
+ { }
+};
+
+static const struct software_node lenovo_yoga_tab2_830_1050_wm5102 = {
+ .properties = lenovo_yoga_tab2_830_1050_wm1502_props,
};
-static struct gpiod_lookup_table * const lenovo_yoga_tab2_830_1050_gpios[] = {
- &lenovo_yoga_tab2_830_1050_codec_gpios,
+static const struct software_node *lenovo_yoga_tab2_830_1050_swnodes[] = {
+ &lenovo_yoga_tab2_830_1050_crystalcove,
+ &lenovo_yoga_tab2_830_1050_arizona,
+ &lenovo_yoga_tab2_830_1050_wm5102,
NULL
};
@@ -898,7 +916,6 @@ static struct x86_dev_info lenovo_yoga_tab2_830_1050_info __initdata = {
/* i2c_client_count gets set by lenovo_yoga_tab2_830_1050_init() */
.pdev_info = lenovo_yoga_tab2_830_1050_pdevs,
.pdev_count = ARRAY_SIZE(lenovo_yoga_tab2_830_1050_pdevs),
- .gpiod_lookup_tables = lenovo_yoga_tab2_830_1050_gpios,
.bat_swnode = &generic_lipo_hv_4v35_battery_node,
.modules = bq24190_modules,
.invalid_aei_gpiochip = "INT33FC:02",
@@ -955,6 +972,7 @@ static const struct pinctrl_map lenovo_yoga_tab2_830_1050_codec_pinctrl_map =
PIN_MAP_MUX_GROUP(LENOVO_YOGA_TAB2_830_1050_CODEC_NAME, "codec_32khz_clk",
"INT33FC:02", "pmu_clk2_grp", "pmu_clk");
+static struct device *lenovo_yoga_tab2_830_1050_codec_dev;
static struct pinctrl *lenovo_yoga_tab2_830_1050_codec_pinctrl;
static struct sys_off_handler *lenovo_yoga_tab2_830_1050_sys_off_handler;
@@ -981,12 +999,24 @@ static int __init lenovo_yoga_tab2_830_1050_init_codec(void)
goto err_unregister_mappings;
}
- /* We're done with the codec_dev now */
- put_device(codec_dev);
+ ret = software_node_register_node_group(lenovo_yoga_tab2_830_1050_swnodes);
+ if (ret) {
+ ret = dev_err_probe(codec_dev, ret, "registering software nodes\n");
+ goto err_unregister_mappings;
+ }
+ ret = device_add_software_node(codec_dev, &lenovo_yoga_tab2_830_1050_wm5102);
+ if (ret) {
+ ret = dev_err_probe(codec_dev, ret, "adding software node\n");
+ goto err_unregister_swnodes;
+ }
+
+ lenovo_yoga_tab2_830_1050_codec_dev = codec_dev;
lenovo_yoga_tab2_830_1050_codec_pinctrl = pinctrl;
return 0;
+err_unregister_swnodes:
+ software_node_unregister_node_group(lenovo_yoga_tab2_830_1050_swnodes);
err_unregister_mappings:
pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map);
err_put_device:
@@ -1034,6 +1064,12 @@ static void lenovo_yoga_tab2_830_1050_exit(void)
{
unregister_sys_off_handler(lenovo_yoga_tab2_830_1050_sys_off_handler);
+ if (lenovo_yoga_tab2_830_1050_codec_dev) {
+ device_remove_software_node(lenovo_yoga_tab2_830_1050_codec_dev);
+ put_device(lenovo_yoga_tab2_830_1050_codec_dev);
+ software_node_unregister_node_group(lenovo_yoga_tab2_830_1050_swnodes);
+ }
+
if (lenovo_yoga_tab2_830_1050_codec_pinctrl) {
pinctrl_put(lenovo_yoga_tab2_830_1050_codec_pinctrl);
pinctrl_unregister_mappings(&lenovo_yoga_tab2_830_1050_codec_pinctrl_map);
Now that gpiolib supports software nodes to describe GPIOs, switch the driver away from using GPIO lookup tables for wm1502 devices to using PROPERTY_ENTRY_GPIO(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/platform/x86/x86-android-tablets.c | 64 +++++++++++++++++----- 1 file changed, 50 insertions(+), 14 deletions(-)