[v11,0/3] Add Versal usb model

Message

Sai Pavan Boddu Sept. 29, 2020, 10:55 a.m. UTC

This patch series attempts to make 'hcd-xhci' an independent model so
it can be used by both pci and system-bus interface.

Changes for V2:
    Make XHCIState non-qom
    Use container_of functions for retriving pci device instance
    Initialize the AddressSpace pointer in PATCH 1/3 itself
Changes for V3:
    Convert XHCIState to TYPE_DEVICE and register as a child of XHCIPciState.
Changes for V4:
    Add DWC3 usb controller
    Add versal, usb2-reg module
    Connect sysbus xhci to versal virt board
Changes for V5:
    Add extra info about dwc3 and usb2_regs devices in commit messages
    Use only one irq for versal usb controller
    Mark the unimplemented registers in dwc3 controller
    Rebase the patches over master.
    Move few mispalced contents from patch 2/7 to 3/7.
    Fix the author names in the header.
    Move the inclusion of "sysemu/dma.h" from patch 1/7 to 3/7
Changes for V6:
    Fixed style issue in patch 7/7
    Renamed usb2_reg model to VersalUsb2CtrlReg
    Fixed author in headers
Changes for V7:
    Create a usb structure to keep things clean
    Remove the repeated patch in the series i.e 5/7
Changes for V8:
    Fix vmstate sturcts to support cross version migration.
Changes for V9:
    Added recommended changes to fix vmstate migration.
    Fixed commit message on 3/7.
Changes for V10:
    use vmstate_post_load avaialble in VMStateDescription
    tested vmstate cross migration.
Changes for V11:
    Removed the patches which got accepted
    Changed object name "USB2Reg" -> "ctrl"
    Updated Subject line on cover letter.


Sai Pavan Boddu (1):
  misc: Add versal-usb2-ctrl-regs module

Vikram Garhwal (2):
  usb: Add DWC3 model
  Versal: Connect DWC3 controller with virt-versal

 hw/arm/xlnx-versal-virt.c                    |  58 +++
 hw/arm/xlnx-versal.c                         |  34 ++
 hw/misc/meson.build                          |   1 +
 hw/misc/xlnx-versal-usb2-ctrl-regs.c         | 222 +++++++++
 hw/usb/Kconfig                               |   6 +
 hw/usb/hcd-dwc3.c                            | 717 +++++++++++++++++++++++++++
 hw/usb/meson.build                           |   1 +
 include/hw/arm/xlnx-versal.h                 |  14 +
 include/hw/misc/xlnx-versal-usb2-ctrl-regs.h |  45 ++
 include/hw/usb/hcd-dwc3.h                    |  55 ++
 10 files changed, 1153 insertions(+)
 create mode 100644 hw/misc/xlnx-versal-usb2-ctrl-regs.c
 create mode 100644 hw/usb/hcd-dwc3.c
 create mode 100644 include/hw/misc/xlnx-versal-usb2-ctrl-regs.h
 create mode 100644 include/hw/usb/hcd-dwc3.h

Comments

[e-mail] Sept. 29, 2020, 3:49 p.m. UTC | #1

Patchew URL: https://patchew.org/QEMU/[e-mail]/



Hi,

This series failed the docker-quick@centos7 build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-centos7 V=1 NETWORK=1
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1
=== TEST SCRIPT END ===

C linker for the host machine: cc ld.bfd 2.27-43
Host machine cpu family: x86_64
Host machine cpu: x86_64
../src/meson.build:10: WARNING: Module unstable-keyval has no backwards or forwards compatibility and might not exist in future releases.
Program sh found: YES
Program python3 found: YES (/usr/bin/python3)
Configuring ninjatool using configuration
---
Running test qtest-aarch64: tpm-tis-device-test
Could not allocate dynamic translator buffer
**
ERROR:../src/tests/qtest/tpm-emu.c:97:tpm_emu_ctrl_thread: assertion failed (cmd == CMD_SET_DATAFD): (0 == 16)
ERROR qtest-aarch64: tpm-tis-device-test - Bail out! ERROR:../src/tests/qtest/tpm-emu.c:97:tpm_emu_ctrl_thread: assertion failed (cmd == CMD_SET_DATAFD): (0 == 16)
../src/tests/qtest/libqtest.c:166: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
make: *** [run-test-160] Error 1
make: *** Waiting for unfinished jobs....

Looking for expected file 'tests/data/acpi/virt/FACP'
---
Using expected file 'tests/data/acpi/virt/SPCR'
Looking for expected file 'tests/data/acpi/virt/DSDT'
Using expected file 'tests/data/acpi/virt/DSDT'
ERROR qtest-x86_64: boot-serial-test - Bail out! ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
socket_accept failed: Resource temporarily unavailable
**
ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
../src/tests/qtest/libqtest.c:166: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
make: *** [run-test-115] Error 1
socket_accept failed: Resource temporarily unavailable
**
ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
../src/tests/qtest/libqtest.c:166: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
ERROR qtest-x86_64: bios-tables-test - Bail out! ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
make: *** [run-test-138] Error 1
socket_accept failed: Resource temporarily unavailable
**
ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
../src/tests/qtest/libqtest.c:166: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
ERROR qtest-x86_64: vmgenid-test - Bail out! ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
make: *** [run-test-147] Error 1
socket_accept failed: Resource temporarily unavailable
**
ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
../src/tests/qtest/libqtest.c:166: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
ERROR qtest-x86_64: migration-test - Bail out! ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
make: *** [run-test-148] Error 1
socket_accept failed: Resource temporarily unavailable
**
ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
../src/tests/qtest/libqtest.c:166: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
ERROR qtest-x86_64: pxe-test - Bail out! ERROR:../src/tests/qtest/libqtest.c:301:qtest_init_without_qmp_handshake: assertion failed: (s->fd >= 0 && s->qmp_fd >= 0)
make: *** [run-test-110] Error 1

Looking for expected file 'tests/data/acpi/virt/FACP'
Using expected file 'tests/data/acpi/virt/FACP'
---
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--rm', '--label', 'com.qemu.instance.uuid=09b4ebdee3d84ad7bfcf28fcd7d5edff', '-u', '1003', '--security-opt', 'seccomp=unconfined', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew2/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-x1t6tm5_/src/docker-src.2020-09-29-11.39.23.8960:/var/tmp/qemu:z,ro', 'qemu/centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit status 2.
filter=--filter=label=com.qemu.instance.uuid=09b4ebdee3d84ad7bfcf28fcd7d5edff
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-x1t6tm5_/src'
make: *** [docker-run-test-quick@centos7] Error 2

real    9m51.221s
user    0m13.743s


The full log is available at
http://patchew.org/logs/[e-mail]/testing.docker-quick@centos7/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [e-mail]