| Message ID | 0d6dd5c0e5279896b29b140b198f2a9f6b2d87ba.1518730026.git.balaton@eik.bme.hu (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Feb 15, 2018 at 10:27:06PM +0100, BALATON Zoltan wrote: > Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. > This is not a complete implementation yet with a lot of components > still missing but enough for the U-Boot firmware to start and to boot > a Linux kernel or AROS. > > Signed-off-by: François Revol <revol@free.fr> > Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> > --- > > v2: > - Rebased to latest changes on master > - Replaced printfs with error_report This has a conflict in hw/ppc/Makefile.objs. Looks like it was based on some other patch that added ppc440_pcix.o. That's not there upstream. > > default-configs/ppc-softmmu.mak | 2 + > default-configs/ppcemb-softmmu.mak | 1 + > hw/ppc/Makefile.objs | 3 +- > hw/ppc/sam460ex.c | 603 +++++++++++++++++++++++++++++++++++++ > 4 files changed, 608 insertions(+), 1 deletion(-) > create mode 100644 hw/ppc/sam460ex.c > > diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak > index 76e29cf..4d7be45 100644 > --- a/default-configs/ppc-softmmu.mak > +++ b/default-configs/ppc-softmmu.mak > @@ -21,6 +21,8 @@ CONFIG_E500=y > CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM)) > CONFIG_PLATFORM_BUS=y > CONFIG_ETSEC=y > +# For Sam460ex > +CONFIG_USB_EHCI_SYSBUS=y > CONFIG_SM501=y > CONFIG_IDE_SII3112=y > CONFIG_I2C=y > diff --git a/default-configs/ppcemb-softmmu.mak b/default-configs/ppcemb-softmmu.mak > index bc5e1b3..67d18b2 100644 > --- a/default-configs/ppcemb-softmmu.mak > +++ b/default-configs/ppcemb-softmmu.mak > @@ -15,6 +15,7 @@ CONFIG_PTIMER=y > CONFIG_I8259=y > CONFIG_XILINX=y > CONFIG_XILINX_ETHLITE=y > +CONFIG_USB_EHCI_SYSBUS=y > CONFIG_SM501=y > CONFIG_IDE_SII3112=y > CONFIG_I2C=y > diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs > index bddc742..86d82a6 100644 > --- a/hw/ppc/Makefile.objs > +++ b/hw/ppc/Makefile.objs > @@ -13,7 +13,8 @@ endif > obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o > # PowerPC 4xx boards > obj-y += ppc4xx_devs.o ppc405_uc.o > -obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o ppc440_pcix.o > +obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o > +obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o sam460ex.o > # PReP > obj-$(CONFIG_PREP) += prep.o > obj-$(CONFIG_PREP) += prep_systemio.o > diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c > new file mode 100644 > index 0000000..ff99cf9 > --- /dev/null > +++ b/hw/ppc/sam460ex.c > @@ -0,0 +1,603 @@ > +/* > + * QEMU aCube Sam460ex board emulation > + * > + * Copyright (c) 2012 François Revol > + * Copyright (c) 2016-2018 BALATON Zoltan > + * > + * This file is derived from hw/ppc440_bamboo.c, > + * the copyright for that material belongs to the original owners. > + * > + * This work is licensed under the GNU GPL license version 2 or later. > + * > + */ > + > +#include "qemu/osdep.h" > +#include "qemu-common.h" > +#include "qemu/cutils.h" > +#include "qemu/error-report.h" > +#include "qapi/error.h" > +#include "hw/hw.h" > +#include "sysemu/blockdev.h" > +#include "hw/boards.h" > +#include "sysemu/kvm.h" > +#include "kvm_ppc.h" > +#include "sysemu/device_tree.h" > +#include "sysemu/block-backend.h" > +#include "hw/loader.h" > +#include "elf.h" > +#include "exec/address-spaces.h" > +#include "exec/memory.h" > +#include "hw/ppc/ppc440.h" > +#include "hw/ppc/ppc405.h" > +#include "hw/block/flash.h" > +#include "sysemu/sysemu.h" > +#include "sysemu/qtest.h" > +#include "hw/sysbus.h" > +#include "hw/char/serial.h" > +#include "hw/i2c/ppc4xx_i2c.h" > +#include "hw/i2c/smbus.h" > +#include "hw/usb/hcd-ehci.h" > + > +#define BINARY_DEVICE_TREE_FILE "sam460ex.dtb" > +#define UBOOT_FILENAME "u-boot-sam460-20100605.bin" > +/* to extract the official U-Boot bin from the updater: */ > +/* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \ > + if=updater/updater-460 of=u-boot-sam460-20100605.bin */ > + > +/* from Sam460 U-Boot include/configs/Sam460ex.h */ > +#define FLASH_BASE 0xfff00000 > +#define FLASH_BASE_H 0x4 > +#define FLASH_SIZE (1 << 20) > +#define UBOOT_LOAD_BASE 0xfff80000 > +#define UBOOT_SIZE 0x00080000 > +#define UBOOT_ENTRY 0xfffffffc > + > +/* from U-Boot */ > +#define EPAPR_MAGIC (0x45504150) > +#define KERNEL_ADDR 0x1000000 > +#define FDT_ADDR 0x1800000 > +#define RAMDISK_ADDR 0x1900000 > + > +/* Sam460ex IRQ MAP: > + IRQ0 = ETH_INT > + IRQ1 = FPGA_INT > + IRQ2 = PCI_INT (PCIA, PCIB, PCIC, PCIB) > + IRQ3 = FPGA_INT2 > + IRQ11 = RTC_INT > + IRQ12 = SM502_INT > +*/ > + > +#define SDRAM_NR_BANKS 4 > + > +/* FIXME: See u-boot.git 8ac41e, also fix in ppc440_uc.c */ > +static const unsigned int ppc460ex_sdram_bank_sizes[] = { > + 1024 << 20, 512 << 20, 256 << 20, 128 << 20, 64 << 20, 32 << 20, 0 > +}; > + > +struct boot_info { > + uint32_t dt_base; > + uint32_t dt_size; > + uint32_t entry; > +}; > + > +/*****************************************************************************/ > +/* SPD eeprom content from mips_malta.c */ > + > +struct _eeprom24c0x_t { > + uint8_t tick; > + uint8_t address; > + uint8_t command; > + uint8_t ack; > + uint8_t scl; > + uint8_t sda; > + uint8_t data; > + uint8_t contents[256]; > +}; > + > +typedef struct _eeprom24c0x_t eeprom24c0x_t; > + > +static eeprom24c0x_t spd_eeprom = { > + .contents = { > + /* 00000000: */ 0x80, 0x08, 0xFF, 0x0D, 0x0A, 0xFF, 0x40, 0x00, > + /* 00000008: */ 0x04, 0x75, 0x54, 0x00, 0x82, 0x08, 0x00, 0x01, > + /* 00000010: */ 0x8F, 0x04, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, > + /* 00000018: */ 0x00, 0x00, 0x00, 0x14, 0x0F, 0x14, 0x2D, 0xFF, > + /* 00000020: */ 0x15, 0x08, 0x15, 0x08, 0x00, 0x00, 0x00, 0x00, > + /* 00000028: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000030: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000038: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xD0, > + /* 00000040: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000048: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000050: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000058: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000060: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000068: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000070: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, > + /* 00000078: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0xF4, > + }, > +}; > + > +static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size) > +{ > + enum { SDR = 0x4, DDR1 = 0x7, DDR2 = 0x8 } type; > + uint8_t *spd = spd_eeprom.contents; > + uint8_t nbanks = 0; > + uint16_t density = 0; > + int i; > + > + /* work in terms of MB */ > + ram_size >>= 20; > + > + while ((ram_size >= 4) && (nbanks <= 2)) { > + int sz_log2 = MIN(31 - clz32(ram_size), 14); > + nbanks++; > + density |= 1 << (sz_log2 - 2); > + ram_size -= 1 << sz_log2; > + } > + > + /* split to 2 banks if possible */ > + if ((nbanks == 1) && (density > 1)) { > + nbanks++; > + density >>= 1; > + } > + > + if (density & 0xff00) { > + density = (density & 0xe0) | ((density >> 8) & 0x1f); > + type = DDR2; > + } else if (!(density & 0x1f)) { > + type = DDR2; > + } else { > + type = SDR; > + } > + > + if (ram_size) { > + warn_report("SPD cannot represent final " RAM_ADDR_FMT "MB" > + " of SDRAM", ram_size); > + } > + > + /* fill in SPD memory information */ > + spd[2] = type; > + spd[5] = nbanks; > + spd[31] = density; > + > + /* XXX: this is totally random */ > + spd[9] = 0x10; /* CAS tcyc */ > + spd[18] = 0x20; /* CAS bit */ > + spd[23] = 0x10; /* CAS tcyc */ > + spd[25] = 0x10; /* CAS tcyc */ > + > + /* checksum */ > + spd[63] = 0; > + for (i = 0; i < 63; i++) { > + spd[63] += spd[i]; > + } > + > + /* copy for SMBUS */ > + memcpy(eeprom, spd, sizeof(spd_eeprom.contents)); > +} > + > +static void generate_eeprom_serial(uint8_t *eeprom) > +{ > + int i, pos = 0; > + uint8_t mac[6] = { 0x00 }; > + uint8_t sn[5] = { 0x01, 0x23, 0x45, 0x67, 0x89 }; > + > + /* version */ > + eeprom[pos++] = 0x01; > + > + /* count */ > + eeprom[pos++] = 0x02; > + > + /* MAC address */ > + eeprom[pos++] = 0x01; /* MAC */ > + eeprom[pos++] = 0x06; /* length */ > + memcpy(&eeprom[pos], mac, sizeof(mac)); > + pos += sizeof(mac); > + > + /* serial number */ > + eeprom[pos++] = 0x02; /* serial */ > + eeprom[pos++] = 0x05; /* length */ > + memcpy(&eeprom[pos], sn, sizeof(sn)); > + pos += sizeof(sn); > + > + /* checksum */ > + eeprom[pos] = 0; > + for (i = 0; i < pos; i++) { > + eeprom[pos] += eeprom[i]; > + } > +} > + > +/*****************************************************************************/ > + > +static int sam460ex_load_uboot(void) > +{ > + DriveInfo *dinfo; > + BlockBackend *blk = NULL; > + hwaddr base = FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32); > + long bios_size = FLASH_SIZE; > + int fl_sectors; > + > + dinfo = drive_get(IF_PFLASH, 0, 0); > + if (dinfo) { > + blk = blk_by_legacy_dinfo(dinfo); > + bios_size = blk_getlength(blk); > + } > + fl_sectors = (bios_size + 65535) >> 16; > + > + if (!pflash_cfi01_register(base, NULL, "sam460ex.flash", bios_size, > + blk, (64 * 1024), fl_sectors, > + 1, 0x89, 0x18, 0x0000, 0x0, 1)) { > + error_report("qemu: Error registering flash memory."); > + /* XXX: return an error instead? */ > + exit(1); > + } > + > + if (!blk) { > + /*error_report("No flash image given with the 'pflash' parameter," > + " using default u-boot image");*/ > + base = UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32); > + rom_add_file_fixed(UBOOT_FILENAME, base, -1); > + } > + > + return 0; > +} > + > +static int sam460ex_load_device_tree(hwaddr addr, > + uint32_t ramsize, > + hwaddr initrd_base, > + hwaddr initrd_size, > + const char *kernel_cmdline) > +{ > + int ret = -1; > + uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) }; > + char *filename; > + int fdt_size; > + void *fdt; > + uint32_t tb_freq = 400000000; > + uint32_t clock_freq = 400000000; > + > + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); > + if (!filename) { > + goto out; > + } > + fdt = load_device_tree(filename, &fdt_size); > + g_free(filename); > + if (fdt == NULL) { > + goto out; > + } > + > + /* Manipulate device tree in memory. */ > + > + ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, > + sizeof(mem_reg_property)); > + if (ret < 0) { > + error_report("couldn't set /memory/reg"); > + } > + > + /* default FDT doesn't have a /chosen node... */ > + qemu_fdt_add_subnode(fdt, "/chosen"); > + > + ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", > + initrd_base); > + if (ret < 0) { > + error_report("couldn't set /chosen/linux,initrd-start"); > + } > + > + ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", > + (initrd_base + initrd_size)); > + if (ret < 0) { > + error_report("couldn't set /chosen/linux,initrd-end"); > + } > + > + ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", > + kernel_cmdline); > + if (ret < 0) { > + error_report("couldn't set /chosen/bootargs"); > + } > + > + /* Copy data from the host device tree into the guest. Since the guest can > + * directly access the timebase without host involvement, we must expose > + * the correct frequencies. */ > + if (kvm_enabled()) { > + tb_freq = kvmppc_get_tbfreq(); > + clock_freq = kvmppc_get_clockfreq(); > + } > + > + qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency", > + clock_freq); > + qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency", > + tb_freq); > + > + rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); > + g_free(fdt); > + ret = fdt_size; > + > +out: > + > + return ret; > +} > + > +/* Create reset TLB entries for BookE, mapping only the flash memory. */ > +static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env) > +{ > + ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; > + > + /* on reset the flash is mapped by a shadow TLB, > + * but since we don't implement them we need to use > + * the same values U-Boot will use to avoid a fault. > + */ > + tlb->attr = 0; > + tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); > + tlb->size = 0x10000000; /* up to 0xffffffff */ > + tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK; > + tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4; > + tlb->PID = 0; > +} > + > +/* Create reset TLB entries for BookE, spanning the 32bit addr space. */ > +static void mmubooke_create_initial_mapping(CPUPPCState *env, > + target_ulong va, > + hwaddr pa) > +{ > + ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; > + > + tlb->attr = 0; > + tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); > + tlb->size = 1 << 31; /* up to 0x80000000 */ > + tlb->EPN = va & TARGET_PAGE_MASK; > + tlb->RPN = pa & TARGET_PAGE_MASK; > + tlb->PID = 0; > +} > + > +static void main_cpu_reset(void *opaque) > +{ > + PowerPCCPU *cpu = opaque; > + CPUPPCState *env = &cpu->env; > + struct boot_info *bi = env->load_info; > + > + cpu_reset(CPU(cpu)); > + > + /* either we have a kernel to boot or we jump to U-Boot */ > + if (bi->entry != UBOOT_ENTRY) { > + env->gpr[1] = (16 << 20) - 8; > + env->gpr[3] = FDT_ADDR; > + env->nip = bi->entry; > + > + /* Create a mapping for the kernel. */ > + mmubooke_create_initial_mapping(env, 0, 0); > + env->gpr[6] = tswap32(EPAPR_MAGIC); > + env->gpr[7] = (16 << 20) - 8; /*bi->ima_size;*/ > + > + } else { > + env->nip = UBOOT_ENTRY; > + mmubooke_create_initial_mapping_uboot(env); > + } > +} > + > +static void sam460ex_init(MachineState *machine) > +{ > + MemoryRegion *address_space_mem = get_system_memory(); > + MemoryRegion *isa = g_new(MemoryRegion, 1); > + MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS); > + hwaddr ram_bases[SDRAM_NR_BANKS]; > + hwaddr ram_sizes[SDRAM_NR_BANKS]; > + MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1); > + qemu_irq *irqs, *uic[4]; > + PCIBus *pci_bus; > + PowerPCCPU *cpu; > + CPUPPCState *env; > + PPC4xxI2CState *i2c[2]; > + hwaddr entry = UBOOT_ENTRY; > + hwaddr loadaddr = 0; > + target_long initrd_size = 0; > + DeviceState *dev; > + SysBusDevice *sbdev; > + int success; > + int i; > + struct boot_info *boot_info; > + const size_t smbus_eeprom_size = 8 * 256; > + uint8_t *smbus_eeprom_buf = g_malloc0(smbus_eeprom_size); > + > + cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); > + env = &cpu->env; > + if (env->mmu_model != POWERPC_MMU_BOOKE) { > + error_report("Only MMU model BookE is supported by this machine."); > + exit(1); > + } > + > +#ifdef TARGET_PPCEMB > + if (!qtest_enabled()) { > + warn_report("qemu-system-ppcemb is deprecated, " > + "please use qemu-system-ppc instead."); > + } > +#endif > + > + qemu_register_reset(main_cpu_reset, cpu); > + boot_info = g_malloc0(sizeof(*boot_info)); > + env->load_info = boot_info; > + > + ppc_booke_timers_init(cpu, 50000000, 0); > + ppc_dcr_init(env, NULL, NULL); > + > + /* PLB arbitrer */ > + ppc4xx_plb_init(env); > + > + /* interrupt controllers */ > + irqs = g_malloc0(sizeof(*irqs) * PPCUIC_OUTPUT_NB); > + irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT]; > + irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT]; > + uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1); > + uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1); > + uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1); > + uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1); > + > + /* SDRAM controller */ > + memset(ram_bases, 0, sizeof(ram_bases)); > + memset(ram_sizes, 0, sizeof(ram_sizes)); > + /* put all RAM on first bank because board has one slot > + * and firmware only checks that */ > + machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1, > + ram_memories, ram_bases, ram_sizes, > + ppc460ex_sdram_bank_sizes); > + > + /* FIXME: does 460EX have ECC interrupts? */ > + ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories, > + ram_bases, ram_sizes, 1); > + > + /* generate SPD EEPROM data */ > + for (i = 0; i < SDRAM_NR_BANKS; i++) { > + generate_eeprom_spd(&smbus_eeprom_buf[i * 256], ram_sizes[i]); > + } > + generate_eeprom_serial(&smbus_eeprom_buf[4 * 256]); > + generate_eeprom_serial(&smbus_eeprom_buf[6 * 256]); > + > + /* IIC controllers */ > + dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]); > + i2c[0] = PPC4xx_I2C(dev); > + object_property_set_bool(OBJECT(dev), true, "realized", NULL); > + smbus_eeprom_init(i2c[0]->bus, 8, smbus_eeprom_buf, smbus_eeprom_size); > + g_free(smbus_eeprom_buf); > + > + dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]); > + i2c[1] = PPC4xx_I2C(dev); > + > + /* External bus controller */ > + ppc405_ebc_init(env); > + > + /* CPR */ > + ppc4xx_cpr_init(env); > + > + /* PLB to AHB bridge */ > + ppc4xx_ahb_init(env); > + > + /* System DCRs */ > + ppc4xx_sdr_init(env); > + > + /* MAL */ > + ppc4xx_mal_init(env, 4, 16, &uic[2][3]); > + > + /* 256K of L2 cache as memory */ > + ppc4xx_l2sram_init(env); > + /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */ > + memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 << 10, > + &error_abort); > + memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram); > + > + /* USB */ > + sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]); > + dev = qdev_create(NULL, "sysbus-ohci"); > + qdev_prop_set_string(dev, "masterbus", "usb-bus.0"); > + qdev_prop_set_uint32(dev, "num-ports", 6); > + qdev_init_nofail(dev); > + sbdev = SYS_BUS_DEVICE(dev); > + sysbus_mmio_map(sbdev, 0, 0x4bffd0000); > + sysbus_connect_irq(sbdev, 0, uic[2][30]); > + usb_create_simple(usb_bus_find(-1), "usb-kbd"); > + usb_create_simple(usb_bus_find(-1), "usb-mouse"); > + > + /* PCI bus */ > + ppc460ex_pcie_init(env); > + /* FIXME: is this correct? */ > + dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000, > + uic[1][0], uic[1][20], uic[1][21], uic[1][22], > + NULL); > + pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); > + if (!pci_bus) { > + error_report("couldn't create PCI controller!"); > + exit(1); > + } > + memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(), > + 0, 0x10000); > + memory_region_add_subregion(get_system_memory(), 0xc08000000, isa); > + > + /* PCI devices */ > + pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501"); > + /* SoC has a single SATA port but we don't emulate that yet > + * However, firmware and usual clients have driver for SiI311x > + * so add one for convenience by default */ > + if (defaults_enabled()) { > + pci_create_simple(pci_bus, -1, "sii3112"); > + } > + > + /* SoC has 4 UARTs > + * but board has only one wired and two are present in fdt */ > + if (serial_hds[0] != NULL) { > + serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1], > + PPC_SERIAL_MM_BAUDBASE, serial_hds[0], > + DEVICE_BIG_ENDIAN); > + } > + if (serial_hds[1] != NULL) { > + serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1], > + PPC_SERIAL_MM_BAUDBASE, serial_hds[1], > + DEVICE_BIG_ENDIAN); > + } > + > + /* Load U-Boot image. */ > + if (!machine->kernel_filename) { > + success = sam460ex_load_uboot(); > + if (success < 0) { > + error_report("qemu: could not load firmware"); > + exit(1); > + } > + } > + > + /* Load kernel. */ > + if (machine->kernel_filename) { > + success = load_uimage(machine->kernel_filename, &entry, &loadaddr, > + NULL, NULL, NULL); > + if (success < 0) { > + uint64_t elf_entry, elf_lowaddr; > + > + success = load_elf(machine->kernel_filename, NULL, NULL, &elf_entry, > + &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0); > + entry = elf_entry; > + loadaddr = elf_lowaddr; > + } > + /* XXX try again as binary */ > + if (success < 0) { > + error_report("qemu: could not load kernel '%s'", > + machine->kernel_filename); > + exit(1); > + } > + } > + > + /* Load initrd. */ > + if (machine->initrd_filename) { > + initrd_size = load_image_targphys(machine->initrd_filename, > + RAMDISK_ADDR, > + machine->ram_size - RAMDISK_ADDR); > + if (initrd_size < 0) { > + error_report("qemu: could not load ram disk '%s' at %x", > + machine->initrd_filename, RAMDISK_ADDR); > + exit(1); > + } > + } > + > + /* If we're loading a kernel directly, we must load the device tree too. */ > + if (machine->kernel_filename) { > + int dt_size; > + > + dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size, > + RAMDISK_ADDR, initrd_size, > + machine->kernel_cmdline); > + if (dt_size < 0) { > + error_report("couldn't load device tree"); > + exit(1); > + } > + > + boot_info->dt_base = FDT_ADDR; > + boot_info->dt_size = dt_size; > + } > + > + boot_info->entry = entry; > +} > + > +static void sam460ex_machine_init(MachineClass *mc) > +{ > + mc->desc = "aCube Sam460ex"; > + mc->init = sam460ex_init; > + mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb"); > + mc->default_ram_size = 512 * M_BYTE; > +} > + > +DEFINE_MACHINE("sam460ex", sam460ex_machine_init)
On Fri, 16 Feb 2018, David Gibson wrote: > On Thu, Feb 15, 2018 at 10:27:06PM +0100, BALATON Zoltan wrote: >> Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. >> This is not a complete implementation yet with a lot of components >> still missing but enough for the U-Boot firmware to start and to boot >> a Linux kernel or AROS. >> >> Signed-off-by: François Revol <revol@free.fr> >> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> >> --- >> >> v2: >> - Rebased to latest changes on master >> - Replaced printfs with error_report > > This has a conflict in hw/ppc/Makefile.objs. Looks like it was based > on some other patch that added ppc440_pcix.o. That's not there > upstream. That's patch 2/3 of this series. Have you missed that? Regards, BALATON Zoltan
On Fri, 16 Feb 2018, BALATON Zoltan wrote: > On Fri, 16 Feb 2018, David Gibson wrote: >> On Thu, Feb 15, 2018 at 10:27:06PM +0100, BALATON Zoltan wrote: >>> Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. >>> This is not a complete implementation yet with a lot of components >>> still missing but enough for the U-Boot firmware to start and to boot >>> a Linux kernel or AROS. >>> >>> Signed-off-by: François Revol <revol@free.fr> >>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> >>> --- >>> >>> v2: >>> - Rebased to latest changes on master >>> - Replaced printfs with error_report >> >> This has a conflict in hw/ppc/Makefile.objs. Looks like it was based >> on some other patch that added ppc440_pcix.o. That's not there >> upstream. > > That's patch 2/3 of this series. Have you missed that? I've sent a v3 for this patch (3/3) now: http://lists.nongnu.org/archive/html/qemu-devel/2018-02/msg04774.html which includes the dts and dtb as well (I'll send a separate patch for the firmware after we agree on how to best do that). The missing 2/3 of the v2 series is still valid and needed before this new patch: http://lists.nongnu.org/archive/html/qemu-devel/2018-02/msg04259.html The v3 is only replacing 3/3 of the previous series. Hope this is not too confusing. Regards, BALATON Zoltan
On Sun, Feb 18, 2018 at 12:48:27AM +0100, BALATON Zoltan wrote: > On Fri, 16 Feb 2018, BALATON Zoltan wrote: > > On Fri, 16 Feb 2018, David Gibson wrote: > > > On Thu, Feb 15, 2018 at 10:27:06PM +0100, BALATON Zoltan wrote: > > > > Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. > > > > This is not a complete implementation yet with a lot of components > > > > still missing but enough for the U-Boot firmware to start and to boot > > > > a Linux kernel or AROS. > > > > > > > > Signed-off-by: François Revol <revol@free.fr> > > > > Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> > > > > --- > > > > > > > > v2: > > > > - Rebased to latest changes on master > > > > - Replaced printfs with error_report > > > > > > This has a conflict in hw/ppc/Makefile.objs. Looks like it was based > > > on some other patch that added ppc440_pcix.o. That's not there > > > upstream. > > > > That's patch 2/3 of this series. Have you missed that? > > I've sent a v3 for this patch (3/3) now: > > http://lists.nongnu.org/archive/html/qemu-devel/2018-02/msg04774.html > > which includes the dts and dtb as well (I'll send a separate patch for the > firmware after we agree on how to best do that). The missing 2/3 of the v2 > series is still valid and needed before this new patch: > > http://lists.nongnu.org/archive/html/qemu-devel/2018-02/msg04259.html > > The v3 is only replacing 3/3 of the previous series. Hope this is not too > confusing. Uh.. it's a bit awkward. Especially since I do seem to have someone mislaid the earlier 2/3. Can you please resend with whatever's needed on top of the current ppc-for-2.12. > > Regards, > BALATON Zoltan
On Mon, 19 Feb 2018, David Gibson wrote: > On Sun, Feb 18, 2018 at 12:48:27AM +0100, BALATON Zoltan wrote: >> On Fri, 16 Feb 2018, BALATON Zoltan wrote: >>> On Fri, 16 Feb 2018, David Gibson wrote: >>>> On Thu, Feb 15, 2018 at 10:27:06PM +0100, BALATON Zoltan wrote: >>>>> Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. >>>>> This is not a complete implementation yet with a lot of components >>>>> still missing but enough for the U-Boot firmware to start and to boot >>>>> a Linux kernel or AROS. >>>>> >>>>> Signed-off-by: François Revol <revol@free.fr> >>>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> >>>>> --- >>>>> >>>>> v2: >>>>> - Rebased to latest changes on master >>>>> - Replaced printfs with error_report >>>> >>>> This has a conflict in hw/ppc/Makefile.objs. Looks like it was based >>>> on some other patch that added ppc440_pcix.o. That's not there >>>> upstream. >>> >>> That's patch 2/3 of this series. Have you missed that? >> >> I've sent a v3 for this patch (3/3) now: >> >> http://lists.nongnu.org/archive/html/qemu-devel/2018-02/msg04774.html >> >> which includes the dts and dtb as well (I'll send a separate patch for the >> firmware after we agree on how to best do that). The missing 2/3 of the v2 >> series is still valid and needed before this new patch: >> >> http://lists.nongnu.org/archive/html/qemu-devel/2018-02/msg04259.html >> >> The v3 is only replacing 3/3 of the previous series. Hope this is not too >> confusing. > > Uh.. it's a bit awkward. Especially since I do seem to have someone > mislaid the earlier 2/3. Can you please resend with whatever's needed > on top of the current ppc-for-2.12. No problem, sent it now. Regards, BALATON Zoltan
diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak index 76e29cf..4d7be45 100644 --- a/default-configs/ppc-softmmu.mak +++ b/default-configs/ppc-softmmu.mak @@ -21,6 +21,8 @@ CONFIG_E500=y CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM)) CONFIG_PLATFORM_BUS=y CONFIG_ETSEC=y +# For Sam460ex +CONFIG_USB_EHCI_SYSBUS=y CONFIG_SM501=y CONFIG_IDE_SII3112=y CONFIG_I2C=y diff --git a/default-configs/ppcemb-softmmu.mak b/default-configs/ppcemb-softmmu.mak index bc5e1b3..67d18b2 100644 --- a/default-configs/ppcemb-softmmu.mak +++ b/default-configs/ppcemb-softmmu.mak @@ -15,6 +15,7 @@ CONFIG_PTIMER=y CONFIG_I8259=y CONFIG_XILINX=y CONFIG_XILINX_ETHLITE=y +CONFIG_USB_EHCI_SYSBUS=y CONFIG_SM501=y CONFIG_IDE_SII3112=y CONFIG_I2C=y diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs index bddc742..86d82a6 100644 --- a/hw/ppc/Makefile.objs +++ b/hw/ppc/Makefile.objs @@ -13,7 +13,8 @@ endif obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o # PowerPC 4xx boards obj-y += ppc4xx_devs.o ppc405_uc.o -obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o ppc440_bamboo.o ppc440_pcix.o +obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o +obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o sam460ex.o # PReP obj-$(CONFIG_PREP) += prep.o obj-$(CONFIG_PREP) += prep_systemio.o diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c new file mode 100644 index 0000000..ff99cf9 --- /dev/null +++ b/hw/ppc/sam460ex.c @@ -0,0 +1,603 @@ +/* + * QEMU aCube Sam460ex board emulation + * + * Copyright (c) 2012 François Revol + * Copyright (c) 2016-2018 BALATON Zoltan + * + * This file is derived from hw/ppc440_bamboo.c, + * the copyright for that material belongs to the original owners. + * + * This work is licensed under the GNU GPL license version 2 or later. + * + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "qemu/cutils.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include "hw/hw.h" +#include "sysemu/blockdev.h" +#include "hw/boards.h" +#include "sysemu/kvm.h" +#include "kvm_ppc.h" +#include "sysemu/device_tree.h" +#include "sysemu/block-backend.h" +#include "hw/loader.h" +#include "elf.h" +#include "exec/address-spaces.h" +#include "exec/memory.h" +#include "hw/ppc/ppc440.h" +#include "hw/ppc/ppc405.h" +#include "hw/block/flash.h" +#include "sysemu/sysemu.h" +#include "sysemu/qtest.h" +#include "hw/sysbus.h" +#include "hw/char/serial.h" +#include "hw/i2c/ppc4xx_i2c.h" +#include "hw/i2c/smbus.h" +#include "hw/usb/hcd-ehci.h" + +#define BINARY_DEVICE_TREE_FILE "sam460ex.dtb" +#define UBOOT_FILENAME "u-boot-sam460-20100605.bin" +/* to extract the official U-Boot bin from the updater: */ +/* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \ + if=updater/updater-460 of=u-boot-sam460-20100605.bin */ + +/* from Sam460 U-Boot include/configs/Sam460ex.h */ +#define FLASH_BASE 0xfff00000 +#define FLASH_BASE_H 0x4 +#define FLASH_SIZE (1 << 20) +#define UBOOT_LOAD_BASE 0xfff80000 +#define UBOOT_SIZE 0x00080000 +#define UBOOT_ENTRY 0xfffffffc + +/* from U-Boot */ +#define EPAPR_MAGIC (0x45504150) +#define KERNEL_ADDR 0x1000000 +#define FDT_ADDR 0x1800000 +#define RAMDISK_ADDR 0x1900000 + +/* Sam460ex IRQ MAP: + IRQ0 = ETH_INT + IRQ1 = FPGA_INT + IRQ2 = PCI_INT (PCIA, PCIB, PCIC, PCIB) + IRQ3 = FPGA_INT2 + IRQ11 = RTC_INT + IRQ12 = SM502_INT +*/ + +#define SDRAM_NR_BANKS 4 + +/* FIXME: See u-boot.git 8ac41e, also fix in ppc440_uc.c */ +static const unsigned int ppc460ex_sdram_bank_sizes[] = { + 1024 << 20, 512 << 20, 256 << 20, 128 << 20, 64 << 20, 32 << 20, 0 +}; + +struct boot_info { + uint32_t dt_base; + uint32_t dt_size; + uint32_t entry; +}; + +/*****************************************************************************/ +/* SPD eeprom content from mips_malta.c */ + +struct _eeprom24c0x_t { + uint8_t tick; + uint8_t address; + uint8_t command; + uint8_t ack; + uint8_t scl; + uint8_t sda; + uint8_t data; + uint8_t contents[256]; +}; + +typedef struct _eeprom24c0x_t eeprom24c0x_t; + +static eeprom24c0x_t spd_eeprom = { + .contents = { + /* 00000000: */ 0x80, 0x08, 0xFF, 0x0D, 0x0A, 0xFF, 0x40, 0x00, + /* 00000008: */ 0x04, 0x75, 0x54, 0x00, 0x82, 0x08, 0x00, 0x01, + /* 00000010: */ 0x8F, 0x04, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, + /* 00000018: */ 0x00, 0x00, 0x00, 0x14, 0x0F, 0x14, 0x2D, 0xFF, + /* 00000020: */ 0x15, 0x08, 0x15, 0x08, 0x00, 0x00, 0x00, 0x00, + /* 00000028: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000030: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000038: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xD0, + /* 00000040: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000048: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000050: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000058: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000060: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000068: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000070: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* 00000078: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0xF4, + }, +}; + +static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size) +{ + enum { SDR = 0x4, DDR1 = 0x7, DDR2 = 0x8 } type; + uint8_t *spd = spd_eeprom.contents; + uint8_t nbanks = 0; + uint16_t density = 0; + int i; + + /* work in terms of MB */ + ram_size >>= 20; + + while ((ram_size >= 4) && (nbanks <= 2)) { + int sz_log2 = MIN(31 - clz32(ram_size), 14); + nbanks++; + density |= 1 << (sz_log2 - 2); + ram_size -= 1 << sz_log2; + } + + /* split to 2 banks if possible */ + if ((nbanks == 1) && (density > 1)) { + nbanks++; + density >>= 1; + } + + if (density & 0xff00) { + density = (density & 0xe0) | ((density >> 8) & 0x1f); + type = DDR2; + } else if (!(density & 0x1f)) { + type = DDR2; + } else { + type = SDR; + } + + if (ram_size) { + warn_report("SPD cannot represent final " RAM_ADDR_FMT "MB" + " of SDRAM", ram_size); + } + + /* fill in SPD memory information */ + spd[2] = type; + spd[5] = nbanks; + spd[31] = density; + + /* XXX: this is totally random */ + spd[9] = 0x10; /* CAS tcyc */ + spd[18] = 0x20; /* CAS bit */ + spd[23] = 0x10; /* CAS tcyc */ + spd[25] = 0x10; /* CAS tcyc */ + + /* checksum */ + spd[63] = 0; + for (i = 0; i < 63; i++) { + spd[63] += spd[i]; + } + + /* copy for SMBUS */ + memcpy(eeprom, spd, sizeof(spd_eeprom.contents)); +} + +static void generate_eeprom_serial(uint8_t *eeprom) +{ + int i, pos = 0; + uint8_t mac[6] = { 0x00 }; + uint8_t sn[5] = { 0x01, 0x23, 0x45, 0x67, 0x89 }; + + /* version */ + eeprom[pos++] = 0x01; + + /* count */ + eeprom[pos++] = 0x02; + + /* MAC address */ + eeprom[pos++] = 0x01; /* MAC */ + eeprom[pos++] = 0x06; /* length */ + memcpy(&eeprom[pos], mac, sizeof(mac)); + pos += sizeof(mac); + + /* serial number */ + eeprom[pos++] = 0x02; /* serial */ + eeprom[pos++] = 0x05; /* length */ + memcpy(&eeprom[pos], sn, sizeof(sn)); + pos += sizeof(sn); + + /* checksum */ + eeprom[pos] = 0; + for (i = 0; i < pos; i++) { + eeprom[pos] += eeprom[i]; + } +} + +/*****************************************************************************/ + +static int sam460ex_load_uboot(void) +{ + DriveInfo *dinfo; + BlockBackend *blk = NULL; + hwaddr base = FLASH_BASE | ((hwaddr)FLASH_BASE_H << 32); + long bios_size = FLASH_SIZE; + int fl_sectors; + + dinfo = drive_get(IF_PFLASH, 0, 0); + if (dinfo) { + blk = blk_by_legacy_dinfo(dinfo); + bios_size = blk_getlength(blk); + } + fl_sectors = (bios_size + 65535) >> 16; + + if (!pflash_cfi01_register(base, NULL, "sam460ex.flash", bios_size, + blk, (64 * 1024), fl_sectors, + 1, 0x89, 0x18, 0x0000, 0x0, 1)) { + error_report("qemu: Error registering flash memory."); + /* XXX: return an error instead? */ + exit(1); + } + + if (!blk) { + /*error_report("No flash image given with the 'pflash' parameter," + " using default u-boot image");*/ + base = UBOOT_LOAD_BASE | ((hwaddr)FLASH_BASE_H << 32); + rom_add_file_fixed(UBOOT_FILENAME, base, -1); + } + + return 0; +} + +static int sam460ex_load_device_tree(hwaddr addr, + uint32_t ramsize, + hwaddr initrd_base, + hwaddr initrd_size, + const char *kernel_cmdline) +{ + int ret = -1; + uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) }; + char *filename; + int fdt_size; + void *fdt; + uint32_t tb_freq = 400000000; + uint32_t clock_freq = 400000000; + + filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); + if (!filename) { + goto out; + } + fdt = load_device_tree(filename, &fdt_size); + g_free(filename); + if (fdt == NULL) { + goto out; + } + + /* Manipulate device tree in memory. */ + + ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, + sizeof(mem_reg_property)); + if (ret < 0) { + error_report("couldn't set /memory/reg"); + } + + /* default FDT doesn't have a /chosen node... */ + qemu_fdt_add_subnode(fdt, "/chosen"); + + ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", + initrd_base); + if (ret < 0) { + error_report("couldn't set /chosen/linux,initrd-start"); + } + + ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", + (initrd_base + initrd_size)); + if (ret < 0) { + error_report("couldn't set /chosen/linux,initrd-end"); + } + + ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", + kernel_cmdline); + if (ret < 0) { + error_report("couldn't set /chosen/bootargs"); + } + + /* Copy data from the host device tree into the guest. Since the guest can + * directly access the timebase without host involvement, we must expose + * the correct frequencies. */ + if (kvm_enabled()) { + tb_freq = kvmppc_get_tbfreq(); + clock_freq = kvmppc_get_clockfreq(); + } + + qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency", + clock_freq); + qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency", + tb_freq); + + rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); + g_free(fdt); + ret = fdt_size; + +out: + + return ret; +} + +/* Create reset TLB entries for BookE, mapping only the flash memory. */ +static void mmubooke_create_initial_mapping_uboot(CPUPPCState *env) +{ + ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; + + /* on reset the flash is mapped by a shadow TLB, + * but since we don't implement them we need to use + * the same values U-Boot will use to avoid a fault. + */ + tlb->attr = 0; + tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); + tlb->size = 0x10000000; /* up to 0xffffffff */ + tlb->EPN = 0xf0000000 & TARGET_PAGE_MASK; + tlb->RPN = (0xf0000000 & TARGET_PAGE_MASK) | 0x4; + tlb->PID = 0; +} + +/* Create reset TLB entries for BookE, spanning the 32bit addr space. */ +static void mmubooke_create_initial_mapping(CPUPPCState *env, + target_ulong va, + hwaddr pa) +{ + ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; + + tlb->attr = 0; + tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); + tlb->size = 1 << 31; /* up to 0x80000000 */ + tlb->EPN = va & TARGET_PAGE_MASK; + tlb->RPN = pa & TARGET_PAGE_MASK; + tlb->PID = 0; +} + +static void main_cpu_reset(void *opaque) +{ + PowerPCCPU *cpu = opaque; + CPUPPCState *env = &cpu->env; + struct boot_info *bi = env->load_info; + + cpu_reset(CPU(cpu)); + + /* either we have a kernel to boot or we jump to U-Boot */ + if (bi->entry != UBOOT_ENTRY) { + env->gpr[1] = (16 << 20) - 8; + env->gpr[3] = FDT_ADDR; + env->nip = bi->entry; + + /* Create a mapping for the kernel. */ + mmubooke_create_initial_mapping(env, 0, 0); + env->gpr[6] = tswap32(EPAPR_MAGIC); + env->gpr[7] = (16 << 20) - 8; /*bi->ima_size;*/ + + } else { + env->nip = UBOOT_ENTRY; + mmubooke_create_initial_mapping_uboot(env); + } +} + +static void sam460ex_init(MachineState *machine) +{ + MemoryRegion *address_space_mem = get_system_memory(); + MemoryRegion *isa = g_new(MemoryRegion, 1); + MemoryRegion *ram_memories = g_new(MemoryRegion, SDRAM_NR_BANKS); + hwaddr ram_bases[SDRAM_NR_BANKS]; + hwaddr ram_sizes[SDRAM_NR_BANKS]; + MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1); + qemu_irq *irqs, *uic[4]; + PCIBus *pci_bus; + PowerPCCPU *cpu; + CPUPPCState *env; + PPC4xxI2CState *i2c[2]; + hwaddr entry = UBOOT_ENTRY; + hwaddr loadaddr = 0; + target_long initrd_size = 0; + DeviceState *dev; + SysBusDevice *sbdev; + int success; + int i; + struct boot_info *boot_info; + const size_t smbus_eeprom_size = 8 * 256; + uint8_t *smbus_eeprom_buf = g_malloc0(smbus_eeprom_size); + + cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); + env = &cpu->env; + if (env->mmu_model != POWERPC_MMU_BOOKE) { + error_report("Only MMU model BookE is supported by this machine."); + exit(1); + } + +#ifdef TARGET_PPCEMB + if (!qtest_enabled()) { + warn_report("qemu-system-ppcemb is deprecated, " + "please use qemu-system-ppc instead."); + } +#endif + + qemu_register_reset(main_cpu_reset, cpu); + boot_info = g_malloc0(sizeof(*boot_info)); + env->load_info = boot_info; + + ppc_booke_timers_init(cpu, 50000000, 0); + ppc_dcr_init(env, NULL, NULL); + + /* PLB arbitrer */ + ppc4xx_plb_init(env); + + /* interrupt controllers */ + irqs = g_malloc0(sizeof(*irqs) * PPCUIC_OUTPUT_NB); + irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT]; + irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT]; + uic[0] = ppcuic_init(env, irqs, 0xc0, 0, 1); + uic[1] = ppcuic_init(env, &uic[0][30], 0xd0, 0, 1); + uic[2] = ppcuic_init(env, &uic[0][10], 0xe0, 0, 1); + uic[3] = ppcuic_init(env, &uic[0][16], 0xf0, 0, 1); + + /* SDRAM controller */ + memset(ram_bases, 0, sizeof(ram_bases)); + memset(ram_sizes, 0, sizeof(ram_sizes)); + /* put all RAM on first bank because board has one slot + * and firmware only checks that */ + machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1, + ram_memories, ram_bases, ram_sizes, + ppc460ex_sdram_bank_sizes); + + /* FIXME: does 460EX have ECC interrupts? */ + ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories, + ram_bases, ram_sizes, 1); + + /* generate SPD EEPROM data */ + for (i = 0; i < SDRAM_NR_BANKS; i++) { + generate_eeprom_spd(&smbus_eeprom_buf[i * 256], ram_sizes[i]); + } + generate_eeprom_serial(&smbus_eeprom_buf[4 * 256]); + generate_eeprom_serial(&smbus_eeprom_buf[6 * 256]); + + /* IIC controllers */ + dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600700, uic[0][2]); + i2c[0] = PPC4xx_I2C(dev); + object_property_set_bool(OBJECT(dev), true, "realized", NULL); + smbus_eeprom_init(i2c[0]->bus, 8, smbus_eeprom_buf, smbus_eeprom_size); + g_free(smbus_eeprom_buf); + + dev = sysbus_create_simple(TYPE_PPC4xx_I2C, 0x4ef600800, uic[0][3]); + i2c[1] = PPC4xx_I2C(dev); + + /* External bus controller */ + ppc405_ebc_init(env); + + /* CPR */ + ppc4xx_cpr_init(env); + + /* PLB to AHB bridge */ + ppc4xx_ahb_init(env); + + /* System DCRs */ + ppc4xx_sdr_init(env); + + /* MAL */ + ppc4xx_mal_init(env, 4, 16, &uic[2][3]); + + /* 256K of L2 cache as memory */ + ppc4xx_l2sram_init(env); + /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */ + memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 << 10, + &error_abort); + memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram); + + /* USB */ + sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400, uic[2][29]); + dev = qdev_create(NULL, "sysbus-ohci"); + qdev_prop_set_string(dev, "masterbus", "usb-bus.0"); + qdev_prop_set_uint32(dev, "num-ports", 6); + qdev_init_nofail(dev); + sbdev = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(sbdev, 0, 0x4bffd0000); + sysbus_connect_irq(sbdev, 0, uic[2][30]); + usb_create_simple(usb_bus_find(-1), "usb-kbd"); + usb_create_simple(usb_bus_find(-1), "usb-mouse"); + + /* PCI bus */ + ppc460ex_pcie_init(env); + /* FIXME: is this correct? */ + dev = sysbus_create_varargs("ppc440-pcix-host", 0xc0ec00000, + uic[1][0], uic[1][20], uic[1][21], uic[1][22], + NULL); + pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); + if (!pci_bus) { + error_report("couldn't create PCI controller!"); + exit(1); + } + memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(), + 0, 0x10000); + memory_region_add_subregion(get_system_memory(), 0xc08000000, isa); + + /* PCI devices */ + pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501"); + /* SoC has a single SATA port but we don't emulate that yet + * However, firmware and usual clients have driver for SiI311x + * so add one for convenience by default */ + if (defaults_enabled()) { + pci_create_simple(pci_bus, -1, "sii3112"); + } + + /* SoC has 4 UARTs + * but board has only one wired and two are present in fdt */ + if (serial_hds[0] != NULL) { + serial_mm_init(address_space_mem, 0x4ef600300, 0, uic[1][1], + PPC_SERIAL_MM_BAUDBASE, serial_hds[0], + DEVICE_BIG_ENDIAN); + } + if (serial_hds[1] != NULL) { + serial_mm_init(address_space_mem, 0x4ef600400, 0, uic[0][1], + PPC_SERIAL_MM_BAUDBASE, serial_hds[1], + DEVICE_BIG_ENDIAN); + } + + /* Load U-Boot image. */ + if (!machine->kernel_filename) { + success = sam460ex_load_uboot(); + if (success < 0) { + error_report("qemu: could not load firmware"); + exit(1); + } + } + + /* Load kernel. */ + if (machine->kernel_filename) { + success = load_uimage(machine->kernel_filename, &entry, &loadaddr, + NULL, NULL, NULL); + if (success < 0) { + uint64_t elf_entry, elf_lowaddr; + + success = load_elf(machine->kernel_filename, NULL, NULL, &elf_entry, + &elf_lowaddr, NULL, 1, PPC_ELF_MACHINE, 0, 0); + entry = elf_entry; + loadaddr = elf_lowaddr; + } + /* XXX try again as binary */ + if (success < 0) { + error_report("qemu: could not load kernel '%s'", + machine->kernel_filename); + exit(1); + } + } + + /* Load initrd. */ + if (machine->initrd_filename) { + initrd_size = load_image_targphys(machine->initrd_filename, + RAMDISK_ADDR, + machine->ram_size - RAMDISK_ADDR); + if (initrd_size < 0) { + error_report("qemu: could not load ram disk '%s' at %x", + machine->initrd_filename, RAMDISK_ADDR); + exit(1); + } + } + + /* If we're loading a kernel directly, we must load the device tree too. */ + if (machine->kernel_filename) { + int dt_size; + + dt_size = sam460ex_load_device_tree(FDT_ADDR, machine->ram_size, + RAMDISK_ADDR, initrd_size, + machine->kernel_cmdline); + if (dt_size < 0) { + error_report("couldn't load device tree"); + exit(1); + } + + boot_info->dt_base = FDT_ADDR; + boot_info->dt_size = dt_size; + } + + boot_info->entry = entry; +} + +static void sam460ex_machine_init(MachineClass *mc) +{ + mc->desc = "aCube Sam460ex"; + mc->init = sam460ex_init; + mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("460exb"); + mc->default_ram_size = 512 * M_BYTE; +} + +DEFINE_MACHINE("sam460ex", sam460ex_machine_init)