@@ -85,6 +85,7 @@
#define E1000_DEV_ID_82573E 0x108B
#define E1000_DEV_ID_82573E_IAMT 0x108C
#define E1000_DEV_ID_82573L 0x109A
+#define E1000_DEV_ID_82574L 0x10D3
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
@@ -104,6 +105,7 @@
#define E1000_PHY_ID2_82544x 0xC30
#define E1000_PHY_ID2_8254xx_DEFAULT 0xC20 /* 82540x, 82545x, and 82546x */
#define E1000_PHY_ID2_82573x 0xCC0
+#define E1000_PHY_ID2_82574x 0xCB1
/* Register Set. (82543, 82544)
*
@@ -135,8 +137,11 @@
#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_EIAC 0x000DC /* Ext. Interrupt Auto Clear - RW */
#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */
+#define E1000_EITR 0x000E8 /* Extended Interrupt Throttling Rate - RW */
#define E1000_RCTL 0x00100 /* RX Control - RW */
#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
@@ -145,6 +150,7 @@
#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_FCRTV 0x05F40 /* Flow Control Refresh Timer Value - RW */
#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
#define E1000_TCTL 0x00400 /* TX Control - RW */
@@ -158,8 +164,13 @@
#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
#define FEXTNVM_SW_CONFIG 0x0001
#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
-#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_PBM 0x10000 /* Packet Buffer Memory - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size - RW */
#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEMNGDATA 0x01014 /* MNG EEPROM Read/Write data */
+#define E1000_FLMNGCTL 0x01018 /* MNG Flash Control */
+#define E1000_FLMNGDATA 0x0101C /* MNG FLASH Read data */
+#define E1000_FLMNGCNT 0x01020 /* MNG FLASH Read Counter */
#define E1000_FLASH_UPDATES 1000
#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
@@ -168,9 +179,12 @@
#define E1000_FLSWDATA 0x01034 /* FLASH data register */
#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_FLOL 0x01050 /* FEEP Auto Load */
#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTL_A 0x00168 /* Alias to FCRTL */
#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_FCRTH_A 0x00160 /* Alias to FCRTH */
#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
@@ -178,11 +192,17 @@
#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDTR_A 0x00108 /* Alias to RDTR */
#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAL0_A 0x00110 /* Alias to RDBAL0 */
#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDBAH0_A 0x00114 /* Alias to RDBAH0 */
#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDLEN0_A 0x00118 /* Alias to RDLEN0 */
#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDH0_A 0x00120 /* Alias to RDH0 */
#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDT0_A 0x00128 /* Alias to RDT0 */
#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
@@ -191,17 +211,33 @@
#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_POEMB 0x00F10 /* PHY OEM Bits Register - RW */
+#define E1000_RDFH 0x02410 /* Receive Data FIFO Head Register - RW */
+#define E1000_RDFH_A 0x08000 /* Alias to RDFH */
+#define E1000_RDFT 0x02418 /* Receive Data FIFO Tail Register - RW */
+#define E1000_RDFT_A 0x08008 /* Alias to RDFT */
+#define E1000_RDFHS 0x02420 /* Receive Data FIFO Head Saved Register - RW */
+#define E1000_RDFTS 0x02428 /* Receive Data FIFO Tail Saved Register - RW */
+#define E1000_RDFPC 0x02430 /* Receive Data FIFO Packet Count - RW */
#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFH_A 0x08010 /* Alias to TDFH */
#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFT_A 0x08018 /* Alias to TDFT */
#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAL_A 0x00420 /* Alias to TDBAL */
#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDBAH_A 0x00424 /* Alias to TDBAH */
#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDLEN_A 0x00428 /* Alias to TDLEN */
#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDH_A 0x00430 /* Alias to TDH */
#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TDT_A 0x00438 /* Alias to TDT */
#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TIDV_A 0x00440 /* Alias to TIDV */
#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
@@ -282,9 +318,15 @@
#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MAVTV0 0x05010 /* Management VLAN TAG Value 0 */
+#define E1000_MAVTV1 0x05014 /* Management VLAN TAG Value 1 */
+#define E1000_MAVTV2 0x05018 /* Management VLAN TAG Value 2 */
+#define E1000_MAVTV3 0x0501c /* Management VLAN TAG Value 3 */
#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_RA_A 0x00040 /* Alias to RA */
#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_VFTA_A 0x00600 /* Alias to VFTA */
#define E1000_WUC 0x05800 /* Wakeup Control - RW */
#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
#define E1000_WUS 0x05810 /* Wakeup Status - RO */
@@ -294,27 +336,57 @@
#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_MFUTP01 0x05828 /* Management Flex UDP/TCP Ports 0/1 - RW */
+#define E1000_MFUTP23 0x05830 /* Management Flex UDP/TCP Ports 2/3 - RW */
+#define E1000_MFVAL 0x05824 /* Manageability Filters Valid - RW */
+#define E1000_MDEF 0x05890 /* Manageability Decision Filters - RW Array */
#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
#define E1000_HOST_IF 0x08800 /* Host Interface */
#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FTFT 0x09400 /* Flexible TCO Filter Table - RW Array */
#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
-#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_FUNCTAG 0x05B08 /* Function-Tag Register */
#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_GSCN_0 0x05B20 /* 3GIO Statistic Counter Register #0 */
+#define E1000_GSCN_1 0x05B24 /* 3GIO Statistic Counter Register #1 */
+#define E1000_GSCN_2 0x05B28 /* 3GIO Statistic Counter Register #2 */
+#define E1000_GSCN_3 0x05B2C /* 3GIO Statistic Counter Register #3 */
#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_GCR2 0x05B64 /* 3GIO Control Register 2 */
#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_PBACLR 0x05B68 /* MSI-X PBA Clear */
#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
#define E1000_HICR 0x08F00 /* Host Inteface Control */
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
+#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */
+#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
+#define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */
+#define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */
+#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TIMADJL 0x0B60C /* Time Adjustment Offset register Low - RW */
+#define E1000_TIMADJH 0x0B610 /* Time Adjustment Offset register High - RW */
+#define E1000_RXCFGL 0x0B634 /* RX Ethertype and Message Type - RW*/
+
/* RSS registers */
#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
@@ -323,6 +395,81 @@
#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+#define E1000_MRQC_ENABLED(mrqc) (((mrqc) & (BIT(0) | BIT(1))) == BIT(0))
+
+#define E1000_RETA_IDX(hash) ((hash) & (BIT(7) - 1))
+#define E1000_RETA_VAL(reta, hash) (((uint8_t *)(reta))[E1000_RETA_IDX(hash)])
+#define E1000_RSS_QUEUE(reta, hash) ((E1000_RETA_VAL(reta, hash) & BIT(7)) >> 7)
+
+#define E1000_MRQC_EN_TCPIPV4(mrqc) ((mrqc) & BIT(16))
+#define E1000_MRQC_EN_IPV4(mrqc) ((mrqc) & BIT(17))
+#define E1000_MRQC_EN_TCPIPV6(mrqc) ((mrqc) & BIT(18))
+#define E1000_MRQC_EN_IPV6EX(mrqc) ((mrqc) & BIT(19))
+#define E1000_MRQC_EN_IPV6(mrqc) ((mrqc) & BIT(20))
+
+#define E1000_MRQ_RSS_TYPE_NONE (0)
+#define E1000_MRQ_RSS_TYPE_IPV4TCP (1)
+#define E1000_MRQ_RSS_TYPE_IPV4 (2)
+#define E1000_MRQ_RSS_TYPE_IPV6TCP (3)
+#define E1000_MRQ_RSS_TYPE_IPV6EX (4)
+#define E1000_MRQ_RSS_TYPE_IPV6 (5)
+
+#define E1000_ICR_ASSERTED BIT(31)
+#define E1000_EIAC_MASK 0x01F00000
+
+/* IVAR register parsing helpers */
+#define E1000_IVAR_INT_ALLOC_VALID (0x8)
+
+#define E1000_IVAR_RXQ0_SHIFT (0)
+#define E1000_IVAR_RXQ1_SHIFT (4)
+#define E1000_IVAR_TXQ0_SHIFT (8)
+#define E1000_IVAR_TXQ1_SHIFT (12)
+#define E1000_IVAR_OTHER_SHIFT (16)
+
+#define E1000_IVAR_ENTRY_MASK (0xF)
+#define E1000_IVAR_ENTRY_VALID_MASK E1000_IVAR_INT_ALLOC_VALID
+#define E1000_IVAR_ENTRY_VEC_MASK (0x7)
+
+#define E1000_IVAR_RXQ0(x) ((x) >> E1000_IVAR_RXQ0_SHIFT)
+#define E1000_IVAR_RXQ1(x) ((x) >> E1000_IVAR_RXQ1_SHIFT)
+#define E1000_IVAR_TXQ0(x) ((x) >> E1000_IVAR_TXQ0_SHIFT)
+#define E1000_IVAR_TXQ1(x) ((x) >> E1000_IVAR_TXQ1_SHIFT)
+#define E1000_IVAR_OTHER(x) ((x) >> E1000_IVAR_OTHER_SHIFT)
+
+#define E1000_IVAR_ENTRY_VALID(x) ((x) & E1000_IVAR_ENTRY_VALID_MASK)
+#define E1000_IVAR_ENTRY_VEC(x) ((x) & E1000_IVAR_ENTRY_VEC_MASK)
+
+#define E1000_IVAR_TX_INT_EVERY_WB BIT(31)
+
+/* RFCTL register bits */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACK_DATA_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* PSRCTL parsing */
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 0
+#define E1000_PSRCTL_BSIZE1_SHIFT 8
+#define E1000_PSRCTL_BSIZE2_SHIFT 16
+#define E1000_PSRCTL_BSIZE3_SHIFT 24
+
+#define E1000_PSRCTL_BUFFS_PER_DESC 4
+
+/* TARC* parsing */
+#define E1000_TARC_ENABLE BIT(10)
+
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
#define PHY_CTRL 0x00 /* Control Register */
@@ -338,6 +485,40 @@
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+/* 82574-specific registers */
+#define PHY_COPPER_CTRL1 0x10 /* Copper Specific Control Register 1 */
+#define PHY_COPPER_STAT1 0x11 /* Copper Specific Status Register 1 */
+#define PHY_COPPER_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define PHY_COPPER_STAT2 0x13 /* Copper Specific Status Register 2 */
+#define PHY_COPPER_CTRL3 0x14 /* Copper Specific Control Register 3 */
+#define PHY_COPPER_CTRL2 0x1A /* Copper Specific Control Register 2 */
+#define PHY_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+#define PHY_PAGE 0x16 /* Page Address (Any page) */
+#define PHY_OEM_BITS 0x19 /* OEM Bits (Page 0) */
+#define PHY_BIAS_1 0x1d /* Bias Setting Register */
+#define PHY_BIAS_2 0x1e /* Bias Setting Register */
+
+/* 82574-specific registers - page 2 */
+#define PHY_MAC_CTRL1 0x10 /* MAC Specific Control Register 1 */
+#define PHY_MAC_INT_ENABLE 0x12 /* MAC Interrupt Enable Register */
+#define PHY_MAC_STAT 0x13 /* MAC Specific Status Register */
+#define PHY_MAC_CTRL2 0x15 /* MAC Specific Control Register 2 */
+
+/* 82574-specific registers - page 3 */
+#define PHY_LED_03_FUNC_CTRL1 0x10 /* LED[3:0] Function Control */
+#define PHY_LED_03_POL_CTRL 0x11 /* LED[3:0] Polarity Control */
+#define PHY_LED_TIMER_CTRL 0x12 /* LED Timer Control */
+#define PHY_LED_45_CTRL 0x13 /* LED[5:4] Function Control and Polarity */
+
+/* 82574-specific registers - page 5 */
+#define PHY_1000T_SKEW 0x14 /* 1000 BASE - T Pair Skew Register */
+#define PHY_1000T_SWAP 0x15 /* 1000 BASE - T Pair Swap and Polarity */
+
+/* 82574-specific registers - page 6 */
+#define PHY_CRC_COUNTERS 0x11 /* CRC Counters */
+
+#define PHY_PAGE_RW_MASK 0x7F /* R/W part of page address register */
+
#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
@@ -417,6 +598,18 @@
#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */
+#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
+#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
+#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
+#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
+
+#define E1000_ICR_OTHER_CAUSES (E1000_ICR_LSC | \
+ E1000_ICR_RXO | \
+ E1000_ICR_MDAC | \
+ E1000_ICR_SRPD | \
+ E1000_ICR_ACK | \
+ E1000_ICR_MNG)
/* Interrupt Cause Set */
#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
@@ -465,6 +658,11 @@
#define E1000_IMS_SRPD E1000_ICR_SRPD
#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_RXQ0 E1000_ICR_RXQ0
+#define E1000_IMS_RXQ1 E1000_ICR_RXQ1
+#define E1000_IMS_TXQ0 E1000_ICR_TXQ0
+#define E1000_IMS_TXQ1 E1000_ICR_TXQ1
+#define E1000_IMS_OTHER E1000_ICR_OTHER
#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
@@ -556,6 +754,15 @@
#define E1000_EEPROM_RW_ADDR_SHIFT 8 /* Shift to the address bits */
#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
+
+/* 82574 EERD/EEWR registers layout */
+#define E1000_EERW_START BIT(0)
+#define E1000_EERW_DONE BIT(1)
+#define E1000_EERW_ADDR_SHIFT 2
+#define E1000_EERW_ADDR_MASK ((1L << 14) - 1)
+#define E1000_EERW_DATA_SHIFT 16
+#define E1000_EERW_DATA_MASK ((1L << 16) - 1)
+
/* Register Bit Masks */
/* Device Control */
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
@@ -578,7 +785,17 @@
#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_SPD_SHIFT 8 /* Speed Select Shift */
+
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* auto speed detection check */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* EEPROM reset */
#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_INT_TIMERS_CLEAR_ENA 0x20000000
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+
#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
@@ -587,6 +804,7 @@
#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
@@ -611,9 +829,13 @@
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
by EEPROM/Flash */
#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_ASDV_10 0x00000000 /* ASDV 10Mb */
+#define E1000_STATUS_ASDV_100 0x00000100 /* ASDV 100Mb */
+#define E1000_STATUS_ASDV_1000 0x00000200 /* ASDV 1Gb */
#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
@@ -628,6 +850,8 @@
#define E1000_STATUS_FUSE_9 0x08000000
#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+#define E1000_STATUS_SPEED_SHIFT 6
+#define E1000_STATUS_ASDV_SHIFT 8
/* EEPROM/Flash Control */
#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
@@ -658,6 +882,8 @@
#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+
+
#define E1000_EECD_SECVAL_SHIFT 22
#define E1000_STM_OPCODE 0xDB00
#define E1000_HICR_FW_RESET 0xC0
@@ -678,6 +904,18 @@
#define E1000_MDIC_INT_EN 0x20000000
#define E1000_MDIC_ERROR 0x40000000
+/* Rx Interrupt Delay Timer */
+#define E1000_RDTR_FPD BIT(31)
+
+/* Tx Interrupt Delay Timer */
+#define E1000_TIDV_FPD BIT(31)
+
+/* Delay increments in nanoseconds for delayed interrupts registers */
+#define E1000_INTR_DELAY_NS_RES (1024)
+
+/* Delay increments in nanoseconds for interrupt throttling registers */
+#define E1000_INTR_THROTTLING_NS_RES (256)
+
/* EEPROM Commands - Microwire */
#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
@@ -705,6 +943,21 @@
#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
+/* PCI Express Control */
+/* 3GIO Control Register - GCR (0x05B00; RW) */
+#define E1000_L0S_ADJUST (1 << 9)
+#define E1000_L1_ENTRY_LATENCY_MSB (1 << 23)
+#define E1000_L1_ENTRY_LATENCY_LSB (1 << 25 | 1 << 26)
+
+#define E1000_L0S_ADJUST (1 << 9)
+#define E1000_L1_ENTRY_LATENCY_MSB (1 << 23)
+#define E1000_L1_ENTRY_LATENCY_LSB (1 << 25 | 1 << 26)
+
+#define E1000_GCR_RO_BITS (1 << 23 | 1 << 25 | 1 << 26)
+
+/* MSI-X PBA Clear register */
+#define E1000_PBACLR_VALID_MASK (BIT(5) - 1)
+
/* Transmit Descriptor */
struct e1000_tx_desc {
uint64_t buffer_addr; /* Address of the descriptor's data buffer */
@@ -746,7 +999,9 @@ struct e1000_tx_desc {
#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_CMD_SNAP 0x40000000 /* Update SNAP header */
#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */
/* Transmit Control */
#define E1000_TCTL_RST 0x00000001 /* software reset */
@@ -761,7 +1016,7 @@ struct e1000_tx_desc {
#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
-/* Receive Descriptor */
+/* Legacy Receive Descriptor */
struct e1000_rx_desc {
uint64_t buffer_addr; /* Address of the descriptor's data buffer */
uint16_t length; /* Length of data DMAed into data buffer */
@@ -771,6 +1026,78 @@ struct e1000_rx_desc {
uint16_t special;
};
+/* Extended Receive Descriptor */
+union e1000_rx_desc_extended {
+ struct {
+ uint64_t buffer_addr;
+ uint64_t reserved;
+ } read;
+ struct {
+ struct {
+ uint32_t mrq; /* Multiple Rx Queues */
+ union {
+ uint32_t rss; /* RSS Hash */
+ struct {
+ uint16_t ip_id; /* IP id */
+ uint16_t csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ uint32_t status_error; /* ext status/error */
+ uint16_t length;
+ uint16_t vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
+
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ uint64_t buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ uint32_t mrq; /* Multiple Rx Queues */
+ union {
+ uint32_t rss; /* RSS Hash */
+ struct {
+ uint16_t ip_id; /* IP id */
+ uint16_t csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ uint32_t status_error; /* ext status/error */
+ uint16_t length0; /* length of buffer 0 */
+ uint16_t vlan; /* VLAN tag */
+ } middle;
+ struct {
+ uint16_t header_status;
+ /* length of buffers 1-3 */
+ uint16_t length[PS_PAGE_BUFFERS];
+ } upper;
+ uint64_t reserved;
+ } wb; /* writeback */
+};
+
+/* Receive Checksum Control bits */
+#define E1000_RXCSUM_IPOFLD 0x100 /* IP Checksum Offload Enable */
+#define E1000_RXCSUM_TUOFLD 0x200 /* TCP/UDP Checksum Offload Enable */
+#define E1000_RXCSUM_PCSD 0x2000 /* Packet Checksum Disable */
+
+#define E1000_RING_DESC_LEN (16)
+#define E1000_RING_DESC_LEN_SHIFT (4)
+
+#define E1000_MIN_RX_DESC_LEN E1000_RING_DESC_LEN
+#define E1000_MAX_RX_DESC_LEN (sizeof(union e1000_rx_desc_packet_split))
+
/* Receive Descriptor bit definitions */
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
@@ -796,6 +1123,15 @@ struct e1000_rx_desc {
#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
#define E1000_RXD_SPC_CFI_SHIFT 12
+/* RX packet types */
+#define E1000_RXD_PKT_MAC (0)
+#define E1000_RXD_PKT_IP4 (1)
+#define E1000_RXD_PKT_IP4_XDP (2)
+#define E1000_RXD_PKT_IP6 (5)
+#define E1000_RXD_PKT_IP6_XDP (6)
+
+#define E1000_RXD_PKT_TYPE(t) ((t) << 16)
+
#define E1000_RXDEXT_STATERR_CE 0x01000000
#define E1000_RXDEXT_STATERR_SE 0x02000000
#define E1000_RXDEXT_STATERR_SEQ 0x04000000
@@ -873,6 +1209,8 @@ struct e1000_data_desc {
#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
* Filtering */
#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_DIS_IP_CHK_ARP 0x10000000 /* Disable IP address chacking */
+ /*for ARP packets - in 82574 */
#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
@@ -896,7 +1234,14 @@ struct e1000_data_desc {
#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+/* FACTPS Control */
+#define E1000_FACTPS_LAN0_ON 0x00000004 /* Lan 0 enable */
+
/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
#define EEPROM_SUM 0xBABA
+/* I/O-Mapped Access to Internal Registers, Memories, and Flash */
+#define E1000_IOADDR 0x00
+#define E1000_IODATA 0x04
+
#endif /* _E1000_HW_H_ */