@@ -6,3 +6,5 @@ common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
common-obj-$(CONFIG_ACPI) += acpi_interface.o
common-obj-$(CONFIG_ACPI) += bios-linker-loader.o
common-obj-$(CONFIG_ACPI) += aml-build.o
+common-obj-$(call land,$(CONFIG_ACPI),$(CONFIG_IPMI)) += ipmi.o
+common-obj-$(call land,$(CONFIG_ACPI),$(call lnot,$(CONFIG_IPMI))) += noipmi.o
new file mode 100644
@@ -0,0 +1,117 @@
+/*
+ * IPMI ACPI firmware handling
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/ipmi/ipmi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/ipmi.h"
+
+static Aml *aml_ipmi_crs(IPMIFwInfo *info)
+{
+ Aml *crs = aml_resource_template();
+ uint8_t regspacing = info->register_spacing;
+
+ /*
+ * The base address is fixed and cannot change. That may be different
+ * if someone does PCI, but we aren't there yet.
+ */
+ switch (info->memspace) {
+ case IPMI_MEMSPACE_IO:
+ aml_append(crs, aml_io(AML_DECODE16, info->base_address,
+ info->base_address + info->register_length - 1,
+ regspacing, info->register_length));
+ break;
+ case IPMI_MEMSPACE_MEM32:
+ aml_append(crs,
+ aml_dword_memory(AML_POS_DECODE,
+ AML_MIN_FIXED, AML_MAX_FIXED,
+ AML_NON_CACHEABLE, AML_READ_WRITE,
+ 0xffffffff,
+ info->base_address,
+ info->base_address + info->register_length - 1,
+ regspacing, info->register_length));
+ break;
+ case IPMI_MEMSPACE_MEM64:
+ aml_append(crs,
+ aml_qword_memory(AML_POS_DECODE,
+ AML_MIN_FIXED, AML_MAX_FIXED,
+ AML_NON_CACHEABLE, AML_READ_WRITE,
+ 0xffffffffffffffffULL,
+ info->base_address,
+ info->base_address + info->register_length - 1,
+ regspacing, info->register_length));
+ break;
+ case IPMI_MEMSPACE_SMBUS:
+ aml_append(crs, aml_return(aml_int(info->base_address)));
+ break;
+ default:
+ abort();
+ }
+
+ if (info->interrupt_number) {
+ aml_append(crs, aml_irq_no_flags(info->interrupt_number));
+ }
+
+ return crs;
+}
+
+static void
+ipmi_encode_one_acpi(Aml *table, IPMIFwInfo *info)
+{
+ Aml *scope, *dev, *method;
+ uint16_t version = ((info->ipmi_spec_major_revision << 8)
+ | (info->ipmi_spec_minor_revision << 4));
+
+ /*
+ * The ACPI parent is a little bit of a pain. It could be in
+ * different places depending on the device. It could be an SMBus,
+ * it could be ISA, it could be PCI, etc. Only the device really
+ * knows, so it has to pass it in.
+ */
+ if (!info->acpi_parent) {
+ ipmi_debug("device %s not compatible with ACPI, no parent given.",
+ info->interface_name);
+ return;
+ }
+
+ scope = aml_scope("%s", info->acpi_parent);
+
+ dev = aml_device("MI0");
+ aml_append(dev, aml_name_decl("_HID", aml_eisaid("IPI0001")));
+ aml_append(dev, aml_name_decl("_STR", aml_string("ipmi_%s",
+ info->interface_name)));
+ aml_append(dev, aml_name_decl("_UID", aml_int(info->uuid)));
+ aml_append(dev, aml_name_decl("_CRS", aml_ipmi_crs(info)));
+
+ /*
+ * The spec seems to require these to be methods. All the examples
+ * show them this way and it doesn't seem to work if they are not.
+ */
+ method = aml_method("_IFT", 0, AML_NOTSERIALIZED);
+ aml_append(method, aml_return(aml_int(info->interface_type)));
+ aml_append(dev, method);
+ method = aml_method("_SRV", 0, AML_NOTSERIALIZED);
+ aml_append(method, aml_return(aml_int(version)));
+ aml_append(dev, method);
+
+ aml_append(scope, dev);
+
+ aml_append(table, scope);
+}
+
+void acpi_add_ipmi(Aml *table)
+{
+ IPMIFwInfo *info = ipmi_first_fwinfo();
+
+ while (info) {
+ ipmi_encode_one_acpi(table, info);
+ info = ipmi_next_fwinfo(info);
+ }
+}
new file mode 100644
@@ -0,0 +1,14 @@
+/*
+ * IPMI ACPI firmware handling
+ *
+ * Copyright (c) 2015 Corey Minyard, MontaVista Software, LLC
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "hw/acpi/ipmi.h"
+
+void acpi_add_ipmi(Aml *ssdt)
+{
+}
@@ -58,6 +58,8 @@
#include "qapi/qmp/qint.h"
#include "qom/qom-qobject.h"
+#include "hw/acpi/ipmi.h"
+
/* These are used to size the ACPI tables for -M pc-i440fx-1.7 and
* -M pc-i440fx-2.0. Even if the actual amount of AML generated grows
* a little bit, there should be plenty of free space since the DSDT
@@ -2283,6 +2285,8 @@ build_dsdt(GArray *table_data, GArray *linker,
aml_append(dsdt, sb_scope);
}
+ acpi_add_ipmi(dsdt);
+
/* copy AML table into ACPI tables blob and patch header there */
g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
build_header(linker, table_data,
new file mode 100644
@@ -0,0 +1,16 @@
+/*
+ * QEMU IPMI ACPI handling
+ *
+ * Copyright (c) 2015 Corey Minyard <cminyard@mvista.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+#ifndef HW_ACPI_IPMI_H
+#define HW_ACPI_IPMI_H
+
+#include "hw/acpi/aml-build.h"
+
+void acpi_add_ipmi(Aml *ssdt);
+
+#endif /* HW_ACPI_IPMI_H */