diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 8842b7f..dce3b6d 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -38,6 +38,10 @@
 static void vfio_disable_interrupts(VFIOPCIDevice *vdev);
 static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);
 
+#define HOST_CMP_FUNC_MASK       (1 << 0)
+static bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char *name,
+                                uint8_t mask);
+
 /*
  * Disabling BAR mmaping can be slow, but toggling it around INTx can
  * also be a huge overhead.  We try to get the best of both worlds by
@@ -1877,6 +1881,185 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos)
     return 0;
 }
 
+static void vfio_check_hot_bus_reset(VFIOPCIDevice *vdev, Error **errp)
+{
+    PCIBus *bus = vdev->pdev.bus;
+    struct vfio_pci_hot_reset_info *info = NULL;
+    struct vfio_pci_dependent_device *devices;
+    VFIOGroup *group;
+    int ret, i, devfn;
+
+    ret = vfio_get_hot_reset_info(vdev, &info);
+    if (ret) {
+        error_setg(errp, "vfio: Cannot enable AER for device %s,"
+                   " device does not support hot reset.",
+                   vdev->vbasedev.name);
+        return;
+    }
+
+    /* List all affected devices by bus reset */
+    devices = &info->devices[0];
+
+    /* Verify that we have all the groups required */
+    for (i = 0; i < info->count; i++) {
+        PCIHostDeviceAddress host;
+        VFIOPCIDevice *tmp;
+        VFIODevice *vbasedev_iter;
+        bool found = false;
+
+        host.domain = devices[i].segment;
+        host.bus = devices[i].bus;
+        host.slot = PCI_SLOT(devices[i].devfn);
+        host.function = PCI_FUNC(devices[i].devfn);
+
+        /* Skip the current device */
+        if (vfio_pci_host_match(&host, vdev->vbasedev.name, 0)) {
+            continue;
+        }
+
+        /* Ensure we own the group of the affected device */
+        QLIST_FOREACH(group, &vfio_group_list, next) {
+            if (group->groupid == devices[i].group_id) {
+                break;
+            }
+        }
+
+        if (!group) {
+            error_setg(errp, "vfio: Cannot enable AER for device %s, "
+                       "depends on group %d which is not owned.",
+                       vdev->vbasedev.name, devices[i].group_id);
+            goto out;
+        }
+
+        /* Ensure affected devices for reset on the same bus */
+        QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
+            if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
+                continue;
+            }
+            tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
+            if (vfio_pci_host_match(&host, tmp->vbasedev.name, 0)) {
+                /*
+                 * AER errors may be broadcast to all functions of a multi-
+                 * function endpoint.  If any of those sibling functions are
+                 * also assigned, they need to have AER enabled or else an
+                 * error may continue to cause a vm_stop condition.  IOW,
+                 * AER setup of this function would be pointless.
+                 */
+                if (vfio_pci_host_match(&host, vdev->vbasedev.name,
+                                        HOST_CMP_FUNC_MASK) &&
+                    !(tmp->features & VFIO_FEATURE_ENABLE_AER)) {
+                    error_setg(errp, "vfio: Cannot enable AER for device %s, on same slot"
+                               " the dependent device %s which does not enable AER.",
+                               vdev->vbasedev.name, tmp->vbasedev.name);
+                    goto out;
+                }
+
+                if (tmp->pdev.bus != bus) {
+                    error_setg(errp, "vfio: Cannot enable AER for device %s, "
+                               "the dependent device %s is not on the same bus",
+                               vdev->vbasedev.name, tmp->vbasedev.name);
+                    goto out;
+                }
+                found = true;
+                break;
+            }
+        }
+
+        /* Ensure all affected devices assigned to VM */
+        if (!found) {
+            error_setg(errp, "vfio: Cannot enable AER for device %s, "
+                       "the dependent device %04x:%02x:%02x.%x "
+                       "is not assigned to VM.",
+                       vdev->vbasedev.name, host.domain, host.bus,
+                       host.slot, host.function);
+            goto out;
+        }
+    }
+
+    /*
+     * To make things simply, functions must are combined
+     * in the same way as on the host. no other irrelative
+     * functions on the virtual same bus was required.
+     */
+    for (devfn = 0; devfn < 8; devfn++) {
+        VFIOPCIDevice *tmp;
+        PCIDevice *dev;
+        bool found = false;
+
+        dev = pci_find_device(bus, pci_bus_num(bus),
+                  PCI_DEVFN(PCI_SLOT(vdev->pdev.devfn), devfn));
+
+        if (!dev) {
+            continue;
+        }
+
+        if (!object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
+            error_setg(errp, "vfio: Cannot enable AER for device %s, "
+                       "only support all dependent devices on the same bus, "
+                       "%s is not one of the dependent devices.",
+                       vdev->vbasedev.name, dev->name);
+            goto out;
+        }
+
+        tmp = DO_UPCAST(VFIOPCIDevice, pdev, dev);
+        for (i = 0; i < info->count; i++) {
+            PCIHostDeviceAddress host;
+
+            host.domain = devices[i].segment;
+            host.bus = devices[i].bus;
+            host.slot = PCI_SLOT(devices[i].devfn);
+            host.function = PCI_FUNC(devices[i].devfn);
+
+            if (vfio_pci_host_match(&host, tmp->vbasedev.name, 0)) {
+                found = true;
+                break;
+            }
+        }
+
+        if (!found) {
+            error_setg(errp, "vfio: Cannot enable AER for device %s, "
+                       "only support all dependent devices on the same bus, "
+                       "%s is not one of the dependent devices.",
+                       vdev->vbasedev.name, tmp->vbasedev.name);
+            goto out;
+        }
+    }
+
+out:
+    g_free(info);
+    return;
+}
+
+static void vfio_aer_check_host_bus_reset(Error **errp)
+{
+    VFIOGroup *group;
+    VFIODevice *vbasedev;
+    VFIOPCIDevice *vdev;
+    Error *local_err = NULL;
+
+    /* Check All vfio-pci devices if have bus reset capability */
+    QLIST_FOREACH(group, &vfio_group_list, next) {
+        QLIST_FOREACH(vbasedev, &group->device_list, next) {
+            if (vbasedev->type != VFIO_DEVICE_TYPE_PCI) {
+                continue;
+            }
+            vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+            if (vdev->features & VFIO_FEATURE_ENABLE_AER) {
+                if (!pci_get_function_0(&vdev->pdev)) {
+                    continue;
+                }
+                vfio_check_hot_bus_reset(vdev, &local_err);
+                if (local_err) {
+                    error_propagate(errp, local_err);
+                    return;
+                }
+            }
+        }
+    }
+
+    return;
+}
+
 static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
                           int pos, uint16_t size)
 {
@@ -2060,7 +2243,6 @@ static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
     vfio_intx_enable(vdev);
 }
 
-#define HOST_CMP_FUNC_MASK       (1 << 0)
 static bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char *name,
                                 uint8_t mask)
 {
@@ -2587,6 +2769,22 @@ static void vfio_unregister_req_notifier(VFIOPCIDevice *vdev)
     vdev->req_enabled = false;
 }
 
+static void vfio_pci_machine_done_notify(Notifier *notifier, void *unused)
+{
+    Error *local_err = NULL;
+
+    vfio_aer_check_host_bus_reset(&local_err);
+    if (local_err) {
+        fprintf(stderr, "%s\n", error_get_pretty(local_err));
+        error_free(local_err);
+        exit(1);
+    }
+}
+
+static Notifier machine_notifier = {
+    .notify = vfio_pci_machine_done_notify,
+};
+
 static int vfio_initfn(PCIDevice *pdev)
 {
     VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
@@ -2932,6 +3130,11 @@ static const TypeInfo vfio_pci_dev_info = {
 static void register_vfio_pci_dev_type(void)
 {
     type_register_static(&vfio_pci_dev_info);
+    /*
+     * Register notifier when machine init is done, since we need
+     * check the configration manner after all vfio device are inited.
+     */
+    qemu_add_machine_init_done_notifier(&machine_notifier);
 }
 
 type_init(register_vfio_pci_dev_type)
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index 7b3924e..db7c6d5 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -15,6 +15,7 @@
 #include "qemu-common.h"
 #include "exec/memory.h"
 #include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
 #include "hw/pci/pci_bridge.h"
 #include "hw/vfio/vfio-common.h"
 #include "qemu/event_notifier.h"
