@@ -142,6 +142,8 @@ gcov-files-virtio-y += $(gcov-files-virtioserial-y)
check-qtest-pci-y += tests/e1000-test$(EXESUF)
gcov-files-pci-y += hw/net/e1000.c
+check-qtest-pci-y += tests/e1000e-test$(EXESUF)
+gcov-files-pci-y += hw/net/e1000e.c hw/net/e1000e_core.c
check-qtest-pci-y += tests/rtl8139-test$(EXESUF)
gcov-files-pci-y += hw/net/rtl8139.c
check-qtest-pci-y += tests/pcnet-test$(EXESUF)
@@ -550,6 +552,7 @@ tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
tests/q35-test$(EXESUF): tests/q35-test.o $(libqos-pc-obj-y)
tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)
tests/e1000-test$(EXESUF): tests/e1000-test.o
+tests/e1000e-test$(EXESUF): tests/e1000e-test.o $(libqos-pc-obj-y)
tests/rtl8139-test$(EXESUF): tests/rtl8139-test.o $(libqos-pc-obj-y)
tests/pcnet-test$(EXESUF): tests/pcnet-test.o
tests/eepro100-test$(EXESUF): tests/eepro100-test.o
new file mode 100644
@@ -0,0 +1,480 @@
+ /*
+ * QTest testcase for e1000e NIC
+ *
+ * Copyright (c) 2015 Ravello Systems LTD (http://ravellosystems.com)
+ * Developed by Daynix Computing LTD (http://www.daynix.com)
+ *
+ * Authors:
+ * Dmitry Fleytman <dmitry@daynix.com>
+ * Leonid Bloch <leonid@daynix.com>
+ * Yan Vugenfirer <yan@daynix.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "qemu/osdep.h"
+#include <glib.h>
+#include "libqtest.h"
+#include "qemu-common.h"
+#include "libqos/pci-pc.h"
+#include "qemu/sockets.h"
+#include "qemu/iov.h"
+#include "qemu/bitops.h"
+#include "libqos/malloc.h"
+#include "libqos/malloc-pc.h"
+#include "libqos/malloc-generic.h"
+
+#define E1000E_IMS (0x00d0)
+
+#define E1000E_STATUS (0x0008)
+#define E1000E_STATUS_LU BIT(1)
+#define E1000E_STATUS_ASDV1000 BIT(9)
+
+#define E1000E_CTRL (0x0000)
+#define E1000E_CTRL_RESET BIT(26)
+
+#define E1000E_RCTL (0x0100)
+#define E1000E_RCTL_EN BIT(1)
+#define E1000E_RCTL_UPE BIT(3)
+#define E1000E_RCTL_MPE BIT(4)
+
+#define E1000E_RFCTL (0x5008)
+#define E1000E_RFCTL_EXTEN BIT(15)
+
+#define E1000E_TCTL (0x0400)
+#define E1000E_TCTL_EN BIT(1)
+
+#define E1000E_CTRL_EXT (0x0018)
+#define E1000E_CTRL_EXT_DRV_LOAD BIT(28)
+#define E1000E_CTRL_EXT_TXLSFLOW BIT(22)
+
+#define E1000E_RX0_MSG_ID (0)
+#define E1000E_TX0_MSG_ID (1)
+#define E1000E_OTHER_MSG_ID (2)
+
+#define E1000E_IVAR (0x00E4)
+#define E1000E_IVAR_TEST_CFG ((E1000E_RX0_MSG_ID << 0) | BIT(3) | \
+ (E1000E_TX0_MSG_ID << 8) | BIT(11) | \
+ (E1000E_OTHER_MSG_ID << 16) | BIT(19) | \
+ BIT(31))
+
+#define E1000E_RING_LEN (0x1000)
+#define E1000E_TXD_LEN (16)
+#define E1000E_RXD_LEN (16)
+
+#define E1000E_TDBAL (0x3800)
+#define E1000E_TDBAH (0x3804)
+#define E1000E_TDLEN (0x3808)
+#define E1000E_TDH (0x3810)
+#define E1000E_TDT (0x3818)
+
+#define E1000E_RDBAL (0x2800)
+#define E1000E_RDBAH (0x2804)
+#define E1000E_RDLEN (0x2808)
+#define E1000E_RDH (0x2810)
+#define E1000E_RDT (0x2818)
+
+typedef struct {
+ QPCIDevice *pci_dev;
+ void *mac_regs;
+
+ uint64_t tx_ring;
+ uint64_t rx_ring;
+} e1000e_device;
+
+static int test_sockets[2];
+static QGuestAllocator *test_alloc;
+static QPCIBus *test_bus;
+
+static void e1000e_pci_foreach_callback(QPCIDevice *dev, int devfn, void *data)
+{
+ *(QPCIDevice **) data = dev;
+}
+
+static QPCIDevice *e1000e_device_find(QPCIBus *bus)
+{
+ static const int e1000e_vendor_id = 0x8086;
+ static const int e1000e_dev_id = 0x10D3;
+
+ QPCIDevice *e1000e_dev = NULL;
+
+ qpci_device_foreach(bus, e1000e_vendor_id, e1000e_dev_id,
+ e1000e_pci_foreach_callback, &e1000e_dev);
+
+ g_assert_nonnull(e1000e_dev);
+
+ return e1000e_dev;
+}
+
+static void e1000e_macreg_write(e1000e_device *d, uint32_t reg, uint32_t val)
+{
+ qpci_io_writel(d->pci_dev, d->mac_regs + reg, val);
+}
+
+static uint32_t e1000e_macreg_read(e1000e_device *d, uint32_t reg)
+{
+ return qpci_io_readl(d->pci_dev, d->mac_regs + reg);
+}
+
+static void e1000e_device_init(QPCIBus *bus, e1000e_device *d)
+{
+ uint32_t val;
+
+ d->pci_dev = e1000e_device_find(bus);
+
+ /* Enable the device */
+ qpci_device_enable(d->pci_dev);
+
+ /* Map BAR0 (mac registers) */
+ d->mac_regs = qpci_iomap(d->pci_dev, 0, NULL);
+ g_assert_nonnull(d->mac_regs);
+
+ /* Reset the device */
+ val = e1000e_macreg_read(d, E1000E_CTRL);
+ e1000e_macreg_write(d, E1000E_CTRL, val | E1000E_CTRL_RESET);
+
+ /* Enable and configure MSI-X */
+ qpci_msix_enable(d->pci_dev);
+ e1000e_macreg_write(d, E1000E_IVAR, E1000E_IVAR_TEST_CFG);
+
+ /* Check the device status - link and speed */
+ val = e1000e_macreg_read(d, E1000E_STATUS);
+ g_assert_cmphex(val & (E1000E_STATUS_LU | E1000E_STATUS_ASDV1000),
+ ==, E1000E_STATUS_LU | E1000E_STATUS_ASDV1000);
+
+ /* Initialize TX/RX logic */
+ e1000e_macreg_write(d, E1000E_RCTL, 0);
+ e1000e_macreg_write(d, E1000E_TCTL, 0);
+
+ /* Notify the device that the driver is ready */
+ val = e1000e_macreg_read(d, E1000E_CTRL_EXT);
+ e1000e_macreg_write(d, E1000E_CTRL_EXT,
+ val | E1000E_CTRL_EXT_DRV_LOAD | E1000E_CTRL_EXT_TXLSFLOW);
+
+ /* Allocate and setup TX ring */
+ d->tx_ring = guest_alloc(test_alloc, E1000E_RING_LEN);
+ g_assert(d->tx_ring != 0);
+
+ e1000e_macreg_write(d, E1000E_TDBAL, (uint32_t) d->tx_ring);
+ e1000e_macreg_write(d, E1000E_TDBAH, (uint32_t) (d->tx_ring >> 32));
+ e1000e_macreg_write(d, E1000E_TDLEN, E1000E_RING_LEN);
+ e1000e_macreg_write(d, E1000E_TDT, 0);
+ e1000e_macreg_write(d, E1000E_TDH, 0);
+
+ /* Enable transmit */
+ e1000e_macreg_write(d, E1000E_TCTL, E1000E_TCTL_EN);
+
+ /* Allocate and setup RX ring */
+ d->rx_ring = guest_alloc(test_alloc, E1000E_RING_LEN);
+ g_assert(d->rx_ring != 0);
+
+ e1000e_macreg_write(d, E1000E_RDBAL, (uint32_t)d->rx_ring);
+ e1000e_macreg_write(d, E1000E_RDBAH, (uint32_t)(d->rx_ring >> 32));
+ e1000e_macreg_write(d, E1000E_RDLEN, E1000E_RING_LEN);
+ e1000e_macreg_write(d, E1000E_RDT, 0);
+ e1000e_macreg_write(d, E1000E_RDH, 0);
+
+ /* Enable receive */
+ e1000e_macreg_write(d, E1000E_RFCTL, E1000E_RFCTL_EXTEN);
+ e1000e_macreg_write(d, E1000E_RCTL, E1000E_RCTL_EN |
+ E1000E_RCTL_UPE |
+ E1000E_RCTL_MPE);
+
+ /* Enable all interrupts */
+ e1000e_macreg_write(d, E1000E_IMS, 0xFFFFFFFF);
+}
+
+static void e1000e_tx_ring_push(e1000e_device *d, void *descr)
+{
+ uint32_t tail = e1000e_macreg_read(d, E1000E_TDT);
+ uint32_t len = e1000e_macreg_read(d, E1000E_TDLEN) / E1000E_TXD_LEN;
+
+ memwrite(d->tx_ring + tail * E1000E_TXD_LEN, descr, E1000E_TXD_LEN);
+ e1000e_macreg_write(d, E1000E_TDT, (tail + 1) % len);
+
+ /* Read WB data for the packet transmitted */
+ memread(d->tx_ring + tail * E1000E_TXD_LEN, descr, E1000E_TXD_LEN);
+}
+
+static void e1000e_rx_ring_push(e1000e_device *d, void *descr)
+{
+ uint32_t tail = e1000e_macreg_read(d, E1000E_RDT);
+ uint32_t len = e1000e_macreg_read(d, E1000E_RDLEN) / E1000E_RXD_LEN;
+
+ memwrite(d->rx_ring + tail * E1000E_RXD_LEN, descr, E1000E_RXD_LEN);
+ e1000e_macreg_write(d, E1000E_RDT, (tail + 1) % len);
+
+ /* Read WB data for the packet received */
+ memread(d->rx_ring + tail * E1000E_RXD_LEN, descr, E1000E_RXD_LEN);
+}
+
+static void e1000e_wait_isr(e1000e_device *d, uint16_t msg_id)
+{
+ guint64 end_time = g_get_monotonic_time() + 5 * G_TIME_SPAN_SECOND;
+
+ do {
+ if (qpci_msix_pending(d->pci_dev, msg_id)) {
+ return;
+ }
+ clock_step(10000);
+ } while (g_get_monotonic_time() < end_time);
+
+ g_error("Timeout expired");
+}
+
+static void e1000e_send_verify(e1000e_device *d)
+{
+ struct {
+ uint64_t buffer_addr;
+ union {
+ uint32_t data;
+ struct {
+ uint16_t length;
+ uint8_t cso;
+ uint8_t cmd;
+ } flags;
+ } lower;
+ union {
+ uint32_t data;
+ struct {
+ uint8_t status;
+ uint8_t css;
+ uint16_t special;
+ } fields;
+ } upper;
+ } descr;
+
+ static const uint32_t DTYP_DATA = BIT(20);
+ static const uint32_t DTYP_EXT = BIT(29);
+ static const uint32_t DCMD_RS = BIT(27);
+ static const uint32_t DCMD_EOP = BIT(24);
+ static const uint32_t DSTA_DD = BIT(0);
+
+ static const int data_len = 64;
+ char buffer[64];
+ int ret;
+ uint32_t recv_len;
+
+ /* Prepare test data buffer */
+ uint64_t data = guest_alloc(test_alloc, data_len);
+ memwrite(data, "TEST", 5);
+
+ /* Prepare TX descriptor */
+ memset(&descr, 0, sizeof(descr));
+ descr.buffer_addr = cpu_to_le64(data);
+ descr.lower.data = cpu_to_le32(DCMD_RS |
+ DCMD_EOP |
+ DTYP_EXT |
+ DTYP_DATA |
+ data_len);
+
+ /* Put descriptor to the ring */
+ e1000e_tx_ring_push(d, &descr);
+
+ /* Wait for TX WB interrupt */
+ e1000e_wait_isr(d, E1000E_TX0_MSG_ID);
+
+ /* Check DD bit */
+ g_assert_cmphex(le32_to_cpu(descr.upper.data) & DSTA_DD, ==, DSTA_DD);
+
+ /* Check data sent to the backend */
+ ret = qemu_recv(test_sockets[0], &recv_len, sizeof(recv_len), 0);
+ g_assert_cmpint(ret, == , sizeof(recv_len));
+ qemu_recv(test_sockets[0], buffer, 64, 0);
+ g_assert_cmpstr(buffer, == , "TEST");
+
+ /* Free test data buffer */
+ guest_free(test_alloc, data);
+}
+
+static void e1000e_receive_verify(e1000e_device *d)
+{
+ union {
+ struct {
+ uint64_t buffer_addr;
+ uint64_t reserved;
+ } read;
+ struct {
+ struct {
+ uint32_t mrq;
+ union {
+ uint32_t rss;
+ struct {
+ uint16_t ip_id;
+ uint16_t csum;
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ uint32_t status_error;
+ uint16_t length;
+ uint16_t vlan;
+ } upper;
+ } wb;
+ } descr;
+
+ static const uint32_t ESTA_DD = BIT(0);
+
+ char test[] = "TEST";
+ int len = htonl(sizeof(test));
+ struct iovec iov[] = {
+ {
+ .iov_base = &len,
+ .iov_len = sizeof(len),
+ },{
+ .iov_base = test,
+ .iov_len = sizeof(test),
+ },
+ };
+
+ static const int data_len = 64;
+ char buffer[64];
+ int ret;
+
+ /* Send a dummy packet to device's socket*/
+ ret = iov_send(test_sockets[0], iov, 2, 0, sizeof(len) + sizeof(test));
+ g_assert_cmpint(ret, == , sizeof(test) + sizeof(len));
+
+ /* Prepare test data buffer */
+ uint64_t data = guest_alloc(test_alloc, data_len);
+
+ /* Prepare RX descriptor */
+ memset(&descr, 0, sizeof(descr));
+ descr.read.buffer_addr = cpu_to_le64(data);
+
+ /* Put descriptor to the ring */
+ e1000e_rx_ring_push(d, &descr);
+
+ /* Wait for TX WB interrupt */
+ e1000e_wait_isr(d, E1000E_RX0_MSG_ID);
+
+ /* Check DD bit */
+ g_assert_cmphex(le32_to_cpu(descr.wb.upper.status_error) &
+ ESTA_DD, ==, ESTA_DD);
+
+ /* Check data sent to the backend */
+ memread(data, buffer, sizeof(buffer));
+ g_assert_cmpstr(buffer, == , "TEST");
+
+ /* Free test data buffer */
+ guest_free(test_alloc, data);
+}
+
+static void e1000e_device_clear(QPCIBus *bus, e1000e_device *d)
+{
+ qpci_iounmap(d->pci_dev, d->mac_regs);
+ qpci_msix_disable(d->pci_dev);
+}
+
+static void data_test_init(e1000e_device *d)
+{
+ char *cmdline;
+
+ int ret = socketpair(PF_UNIX, SOCK_STREAM, 0, test_sockets);
+ g_assert_cmpint(ret, != , -1);
+
+ cmdline = g_strdup_printf("-netdev socket,fd=%d,id=hs0 "
+ "-device e1000e,netdev=hs0", test_sockets[1]);
+ g_assert_nonnull(cmdline);
+
+ qtest_start(cmdline);
+ g_free(cmdline);
+
+ test_bus = qpci_init_pc();
+ g_assert_nonnull(test_bus);
+
+ test_alloc = pc_alloc_init();
+ g_assert_nonnull(test_alloc);
+
+ e1000e_device_init(test_bus, d);
+}
+
+static void data_test_clear(e1000e_device *d)
+{
+ e1000e_device_clear(test_bus, d);
+ close(test_sockets[0]);
+ pc_alloc_uninit(test_alloc);
+ qpci_free_pc(test_bus);
+ qtest_end();
+}
+
+static void test_e1000e_init(gconstpointer data)
+{
+ e1000e_device d;
+
+ data_test_init(&d);
+ data_test_clear(&d);
+}
+
+static void test_e1000e_tx(gconstpointer data)
+{
+ e1000e_device d;
+
+ data_test_init(&d);
+ e1000e_send_verify(&d);
+ data_test_clear(&d);
+}
+
+static void test_e1000e_rx(gconstpointer data)
+{
+ e1000e_device d;
+
+ data_test_init(&d);
+ e1000e_receive_verify(&d);
+ data_test_clear(&d);
+}
+
+static void test_e1000e_multiple_transfers(gconstpointer data)
+{
+ static const long ITERATIONS = 4 * 1024;
+ long i;
+
+ e1000e_device d;
+
+ data_test_init(&d);
+
+ for (i = 0; i < ITERATIONS; i++) {
+ e1000e_send_verify(&d);
+ e1000e_receive_verify(&d);
+ }
+
+ data_test_clear(&d);
+}
+
+static void test_e1000e_hotplug(gconstpointer data)
+{
+ static const uint8_t slot = 0x06;
+
+ qtest_start("-device e1000e");
+
+ qpci_plug_device_test("e1000e", "e1000e_net", slot, NULL);
+ qpci_unplug_acpi_device_test("e1000e_net", slot);
+
+ qtest_end();
+}
+
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+
+ qtest_add_data_func("e1000e/init", NULL, test_e1000e_init);
+ qtest_add_data_func("e1000e/tx", NULL, test_e1000e_tx);
+ qtest_add_data_func("e1000e/rx", NULL, test_e1000e_rx);
+ qtest_add_data_func("e1000e/multiple_transfers", NULL,
+ test_e1000e_multiple_transfers);
+ qtest_add_data_func("e1000e/hotplug", NULL, test_e1000e_hotplug);
+
+ return g_test_run();
+}