| Message ID | 1476031419-6805-3-git-send-email-mark.cave-ayland@ilande.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10/09/2016 11:43 AM, Mark Cave-Ayland wrote: > Now that the DMA helpers are byte-aligned they can be called directly from > the macio routines rather than emulating byte-aligned accesses via multiple > block-level accesses. > > Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> > --- > hw/ide/macio.c | 213 ++++++++------------------------------------------------ > 1 file changed, 28 insertions(+), 185 deletions(-) > Reviewed-by: Eric Blake <eblake@redhat.com>
On 10/09/2016 12:43 PM, Mark Cave-Ayland wrote: > Now that the DMA helpers are byte-aligned they can be called directly from > the macio routines rather than emulating byte-aligned accesses via multiple > block-level accesses. > _cool_ > Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> > --- > hw/ide/macio.c | 213 ++++++++------------------------------------------------ > 1 file changed, 28 insertions(+), 185 deletions(-) > > diff --git a/hw/ide/macio.c b/hw/ide/macio.c > index 76f97c2..9742c00 100644 > --- a/hw/ide/macio.c > +++ b/hw/ide/macio.c > @@ -52,187 +52,6 @@ static const int debug_macio = 0; > > #define MACIO_PAGE_SIZE 4096 > > -/* > - * Unaligned DMA read/write access functions required for OS X/Darwin which > - * don't perform DMA transactions on sector boundaries. These functions are > - * modelled on bdrv_co_preadv()/bdrv_co_pwritev() and so should be easy to > - * remove if the unaligned block APIs are ever exposed. > - */ > - > -static void pmac_dma_read(BlockBackend *blk, > - int64_t offset, unsigned int bytes, > - void (*cb)(void *opaque, int ret), void *opaque) > -{ > - DBDMA_io *io = opaque; > - MACIOIDEState *m = io->opaque; > - IDEState *s = idebus_active_if(&m->bus); > - dma_addr_t dma_addr; > - int64_t sector_num; > - int nsector; > - uint64_t align = BDRV_SECTOR_SIZE; > - size_t head_bytes, tail_bytes; > - > - qemu_iovec_destroy(&io->iov); > - qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1); > - > - sector_num = (offset >> 9); > - nsector = (io->len >> 9); > - > - MACIO_DPRINTF("--- DMA read transfer (0x%" HWADDR_PRIx ",0x%x): " > - "sector_num: %" PRId64 ", nsector: %d\n", io->addr, io->len, > - sector_num, nsector); > - > - dma_addr = io->addr; > - io->dir = DMA_DIRECTION_FROM_DEVICE; > - io->dma_len = io->len; > - io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len, > - io->dir); > - > - if (offset & (align - 1)) { > - head_bytes = offset & (align - 1); > - > - MACIO_DPRINTF("--- DMA unaligned head: sector %" PRId64 ", " > - "discarding %zu bytes\n", sector_num, head_bytes); > - > - qemu_iovec_add(&io->iov, &io->head_remainder, head_bytes); > - > - bytes += offset & (align - 1); > - offset = offset & ~(align - 1); > - } > - > - qemu_iovec_add(&io->iov, io->dma_mem, io->len); > - > - if ((offset + bytes) & (align - 1)) { > - tail_bytes = (offset + bytes) & (align - 1); > - > - MACIO_DPRINTF("--- DMA unaligned tail: sector %" PRId64 ", " > - "discarding bytes %zu\n", sector_num, tail_bytes); > - > - qemu_iovec_add(&io->iov, &io->tail_remainder, align - tail_bytes); > - bytes = ROUND_UP(bytes, align); > - } > - > - s->io_buffer_size -= io->len; > - s->io_buffer_index += io->len; > - > - io->len = 0; > - > - MACIO_DPRINTF("--- Block read transfer - sector_num: %" PRIx64 " " > - "nsector: %x\n", (offset >> 9), (bytes >> 9)); > - > - s->bus->dma->aiocb = blk_aio_preadv(blk, offset, &io->iov, 0, cb, io); > -} > - > -static void pmac_dma_write(BlockBackend *blk, > - int64_t offset, int bytes, > - void (*cb)(void *opaque, int ret), void *opaque) > -{ > - DBDMA_io *io = opaque; > - MACIOIDEState *m = io->opaque; > - IDEState *s = idebus_active_if(&m->bus); > - dma_addr_t dma_addr; > - int64_t sector_num; > - int nsector; > - uint64_t align = BDRV_SECTOR_SIZE; > - size_t head_bytes, tail_bytes; > - bool unaligned_head = false, unaligned_tail = false; > - > - qemu_iovec_destroy(&io->iov); > - qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1); > - > - sector_num = (offset >> 9); > - nsector = (io->len >> 9); > - > - MACIO_DPRINTF("--- DMA write transfer (0x%" HWADDR_PRIx ",0x%x): " > - "sector_num: %" PRId64 ", nsector: %d\n", io->addr, io->len, > - sector_num, nsector); > - > - dma_addr = io->addr; > - io->dir = DMA_DIRECTION_TO_DEVICE; > - io->dma_len = io->len; > - io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len, > - io->dir); > - > - if (offset & (align - 1)) { > - head_bytes = offset & (align - 1); > - sector_num = ((offset & ~(align - 1)) >> 9); > - > - MACIO_DPRINTF("--- DMA unaligned head: pre-reading head sector %" > - PRId64 "\n", sector_num); > - > - blk_pread(s->blk, (sector_num << 9), &io->head_remainder, align); > - > - qemu_iovec_add(&io->iov, &io->head_remainder, head_bytes); > - qemu_iovec_add(&io->iov, io->dma_mem, io->len); > - > - bytes += offset & (align - 1); > - offset = offset & ~(align - 1); > - > - unaligned_head = true; > - } > - > - if ((offset + bytes) & (align - 1)) { > - tail_bytes = (offset + bytes) & (align - 1); > - sector_num = (((offset + bytes) & ~(align - 1)) >> 9); > - > - MACIO_DPRINTF("--- DMA unaligned tail: pre-reading tail sector %" > - PRId64 "\n", sector_num); > - > - blk_pread(s->blk, (sector_num << 9), &io->tail_remainder, align); > - > - if (!unaligned_head) { > - qemu_iovec_add(&io->iov, io->dma_mem, io->len); > - } > - > - qemu_iovec_add(&io->iov, &io->tail_remainder + tail_bytes, > - align - tail_bytes); > - > - bytes = ROUND_UP(bytes, align); > - > - unaligned_tail = true; > - } > - > - if (!unaligned_head && !unaligned_tail) { > - qemu_iovec_add(&io->iov, io->dma_mem, io->len); > - } > - > - s->io_buffer_size -= io->len; > - s->io_buffer_index += io->len; > - > - io->len = 0; > - > - MACIO_DPRINTF("--- Block write transfer - sector_num: %" PRIx64 " " > - "nsector: %x\n", (offset >> 9), (bytes >> 9)); > - > - s->bus->dma->aiocb = blk_aio_pwritev(blk, offset, &io->iov, 0, cb, io); > -} > - > -static void pmac_dma_trim(BlockBackend *blk, > - int64_t offset, int bytes, > - void (*cb)(void *opaque, int ret), void *opaque) > -{ > - DBDMA_io *io = opaque; > - MACIOIDEState *m = io->opaque; > - IDEState *s = idebus_active_if(&m->bus); > - dma_addr_t dma_addr; > - > - qemu_iovec_destroy(&io->iov); > - qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1); > - > - dma_addr = io->addr; > - io->dir = DMA_DIRECTION_TO_DEVICE; > - io->dma_len = io->len; > - io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len, > - io->dir); > - > - qemu_iovec_add(&io->iov, io->dma_mem, io->len); > - s->io_buffer_size -= io->len; > - s->io_buffer_index += io->len; > - io->len = 0; > - > - s->bus->dma->aiocb = ide_issue_trim(offset, &io->iov, cb, io, blk); > -} > - > static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) > { > DBDMA_io *io = opaque; > @@ -244,6 +63,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) > > if (ret < 0) { > MACIO_DPRINTF("DMA error: %d\n", ret); > + qemu_sglist_destroy(&s->sg); > ide_atapi_io_error(s, ret); > goto done; > } > @@ -258,6 +78,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) > > if (s->io_buffer_size <= 0) { > MACIO_DPRINTF("End of IDE transfer\n"); > + qemu_sglist_destroy(&s->sg); > ide_atapi_cmd_ok(s); > m->dma_active = false; > goto done; > @@ -282,7 +103,15 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) > /* Calculate current offset */ > offset = ((int64_t)s->lba << 11) + s->io_buffer_index; > > - pmac_dma_read(s->blk, offset, io->len, pmac_ide_atapi_transfer_cb, io); > + qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1, > + &address_space_memory); > + qemu_sglist_add(&s->sg, io->addr, io->len); > + s->io_buffer_size -= io->len; > + s->io_buffer_index += io->len; > + io->len = 0; > + > + s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1, > + pmac_ide_atapi_transfer_cb, io); > return; > > done: > @@ -310,6 +139,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret) > > if (ret < 0) { > MACIO_DPRINTF("DMA error: %d\n", ret); > + qemu_sglist_destroy(&s->sg); > ide_dma_error(s); > goto done; > } > @@ -324,6 +154,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret) > > if (s->io_buffer_size <= 0) { > MACIO_DPRINTF("End of IDE transfer\n"); > + qemu_sglist_destroy(&s->sg); > s->status = READY_STAT | SEEK_STAT; > ide_set_irq(s->bus); > m->dma_active = false; > @@ -338,15 +169,27 @@ static void pmac_ide_transfer_cb(void *opaque, int ret) > /* Calculate number of sectors */ > offset = (ide_get_sector(s) << 9) + s->io_buffer_index; > > + qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1, > + &address_space_memory); > + qemu_sglist_add(&s->sg, io->addr, io->len); > + s->io_buffer_size -= io->len; > + s->io_buffer_index += io->len; > + io->len = 0; > + > switch (s->dma_cmd) { > case IDE_DMA_READ: > - pmac_dma_read(s->blk, offset, io->len, pmac_ide_transfer_cb, io); > + s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1, > + pmac_ide_atapi_transfer_cb, io); > break; > case IDE_DMA_WRITE: > - pmac_dma_write(s->blk, offset, io->len, pmac_ide_transfer_cb, io); > + s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset, 0x1, > + pmac_ide_transfer_cb, io); > break; > case IDE_DMA_TRIM: > - pmac_dma_trim(s->blk, offset, io->len, pmac_ide_transfer_cb, io); > + s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk), &s->sg, > + offset, 0x1, ide_issue_trim, s->blk, > + pmac_ide_transfer_cb, io, > + DMA_DIRECTION_TO_DEVICE); > break; > default: > abort(); > Looks good, and I assume you've tested it well. I might be pushing it, but any plans in your future for MacIO qtests? Reviewed-by: John Snow <jsnow@redhat.com>
diff --git a/hw/ide/macio.c b/hw/ide/macio.c index 76f97c2..9742c00 100644 --- a/hw/ide/macio.c +++ b/hw/ide/macio.c @@ -52,187 +52,6 @@ static const int debug_macio = 0; #define MACIO_PAGE_SIZE 4096 -/* - * Unaligned DMA read/write access functions required for OS X/Darwin which - * don't perform DMA transactions on sector boundaries. These functions are - * modelled on bdrv_co_preadv()/bdrv_co_pwritev() and so should be easy to - * remove if the unaligned block APIs are ever exposed. - */ - -static void pmac_dma_read(BlockBackend *blk, - int64_t offset, unsigned int bytes, - void (*cb)(void *opaque, int ret), void *opaque) -{ - DBDMA_io *io = opaque; - MACIOIDEState *m = io->opaque; - IDEState *s = idebus_active_if(&m->bus); - dma_addr_t dma_addr; - int64_t sector_num; - int nsector; - uint64_t align = BDRV_SECTOR_SIZE; - size_t head_bytes, tail_bytes; - - qemu_iovec_destroy(&io->iov); - qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1); - - sector_num = (offset >> 9); - nsector = (io->len >> 9); - - MACIO_DPRINTF("--- DMA read transfer (0x%" HWADDR_PRIx ",0x%x): " - "sector_num: %" PRId64 ", nsector: %d\n", io->addr, io->len, - sector_num, nsector); - - dma_addr = io->addr; - io->dir = DMA_DIRECTION_FROM_DEVICE; - io->dma_len = io->len; - io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len, - io->dir); - - if (offset & (align - 1)) { - head_bytes = offset & (align - 1); - - MACIO_DPRINTF("--- DMA unaligned head: sector %" PRId64 ", " - "discarding %zu bytes\n", sector_num, head_bytes); - - qemu_iovec_add(&io->iov, &io->head_remainder, head_bytes); - - bytes += offset & (align - 1); - offset = offset & ~(align - 1); - } - - qemu_iovec_add(&io->iov, io->dma_mem, io->len); - - if ((offset + bytes) & (align - 1)) { - tail_bytes = (offset + bytes) & (align - 1); - - MACIO_DPRINTF("--- DMA unaligned tail: sector %" PRId64 ", " - "discarding bytes %zu\n", sector_num, tail_bytes); - - qemu_iovec_add(&io->iov, &io->tail_remainder, align - tail_bytes); - bytes = ROUND_UP(bytes, align); - } - - s->io_buffer_size -= io->len; - s->io_buffer_index += io->len; - - io->len = 0; - - MACIO_DPRINTF("--- Block read transfer - sector_num: %" PRIx64 " " - "nsector: %x\n", (offset >> 9), (bytes >> 9)); - - s->bus->dma->aiocb = blk_aio_preadv(blk, offset, &io->iov, 0, cb, io); -} - -static void pmac_dma_write(BlockBackend *blk, - int64_t offset, int bytes, - void (*cb)(void *opaque, int ret), void *opaque) -{ - DBDMA_io *io = opaque; - MACIOIDEState *m = io->opaque; - IDEState *s = idebus_active_if(&m->bus); - dma_addr_t dma_addr; - int64_t sector_num; - int nsector; - uint64_t align = BDRV_SECTOR_SIZE; - size_t head_bytes, tail_bytes; - bool unaligned_head = false, unaligned_tail = false; - - qemu_iovec_destroy(&io->iov); - qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1); - - sector_num = (offset >> 9); - nsector = (io->len >> 9); - - MACIO_DPRINTF("--- DMA write transfer (0x%" HWADDR_PRIx ",0x%x): " - "sector_num: %" PRId64 ", nsector: %d\n", io->addr, io->len, - sector_num, nsector); - - dma_addr = io->addr; - io->dir = DMA_DIRECTION_TO_DEVICE; - io->dma_len = io->len; - io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len, - io->dir); - - if (offset & (align - 1)) { - head_bytes = offset & (align - 1); - sector_num = ((offset & ~(align - 1)) >> 9); - - MACIO_DPRINTF("--- DMA unaligned head: pre-reading head sector %" - PRId64 "\n", sector_num); - - blk_pread(s->blk, (sector_num << 9), &io->head_remainder, align); - - qemu_iovec_add(&io->iov, &io->head_remainder, head_bytes); - qemu_iovec_add(&io->iov, io->dma_mem, io->len); - - bytes += offset & (align - 1); - offset = offset & ~(align - 1); - - unaligned_head = true; - } - - if ((offset + bytes) & (align - 1)) { - tail_bytes = (offset + bytes) & (align - 1); - sector_num = (((offset + bytes) & ~(align - 1)) >> 9); - - MACIO_DPRINTF("--- DMA unaligned tail: pre-reading tail sector %" - PRId64 "\n", sector_num); - - blk_pread(s->blk, (sector_num << 9), &io->tail_remainder, align); - - if (!unaligned_head) { - qemu_iovec_add(&io->iov, io->dma_mem, io->len); - } - - qemu_iovec_add(&io->iov, &io->tail_remainder + tail_bytes, - align - tail_bytes); - - bytes = ROUND_UP(bytes, align); - - unaligned_tail = true; - } - - if (!unaligned_head && !unaligned_tail) { - qemu_iovec_add(&io->iov, io->dma_mem, io->len); - } - - s->io_buffer_size -= io->len; - s->io_buffer_index += io->len; - - io->len = 0; - - MACIO_DPRINTF("--- Block write transfer - sector_num: %" PRIx64 " " - "nsector: %x\n", (offset >> 9), (bytes >> 9)); - - s->bus->dma->aiocb = blk_aio_pwritev(blk, offset, &io->iov, 0, cb, io); -} - -static void pmac_dma_trim(BlockBackend *blk, - int64_t offset, int bytes, - void (*cb)(void *opaque, int ret), void *opaque) -{ - DBDMA_io *io = opaque; - MACIOIDEState *m = io->opaque; - IDEState *s = idebus_active_if(&m->bus); - dma_addr_t dma_addr; - - qemu_iovec_destroy(&io->iov); - qemu_iovec_init(&io->iov, io->len / MACIO_PAGE_SIZE + 1); - - dma_addr = io->addr; - io->dir = DMA_DIRECTION_TO_DEVICE; - io->dma_len = io->len; - io->dma_mem = dma_memory_map(&address_space_memory, dma_addr, &io->dma_len, - io->dir); - - qemu_iovec_add(&io->iov, io->dma_mem, io->len); - s->io_buffer_size -= io->len; - s->io_buffer_index += io->len; - io->len = 0; - - s->bus->dma->aiocb = ide_issue_trim(offset, &io->iov, cb, io, blk); -} - static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) { DBDMA_io *io = opaque; @@ -244,6 +63,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) if (ret < 0) { MACIO_DPRINTF("DMA error: %d\n", ret); + qemu_sglist_destroy(&s->sg); ide_atapi_io_error(s, ret); goto done; } @@ -258,6 +78,7 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) if (s->io_buffer_size <= 0) { MACIO_DPRINTF("End of IDE transfer\n"); + qemu_sglist_destroy(&s->sg); ide_atapi_cmd_ok(s); m->dma_active = false; goto done; @@ -282,7 +103,15 @@ static void pmac_ide_atapi_transfer_cb(void *opaque, int ret) /* Calculate current offset */ offset = ((int64_t)s->lba << 11) + s->io_buffer_index; - pmac_dma_read(s->blk, offset, io->len, pmac_ide_atapi_transfer_cb, io); + qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1, + &address_space_memory); + qemu_sglist_add(&s->sg, io->addr, io->len); + s->io_buffer_size -= io->len; + s->io_buffer_index += io->len; + io->len = 0; + + s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1, + pmac_ide_atapi_transfer_cb, io); return; done: @@ -310,6 +139,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret) if (ret < 0) { MACIO_DPRINTF("DMA error: %d\n", ret); + qemu_sglist_destroy(&s->sg); ide_dma_error(s); goto done; } @@ -324,6 +154,7 @@ static void pmac_ide_transfer_cb(void *opaque, int ret) if (s->io_buffer_size <= 0) { MACIO_DPRINTF("End of IDE transfer\n"); + qemu_sglist_destroy(&s->sg); s->status = READY_STAT | SEEK_STAT; ide_set_irq(s->bus); m->dma_active = false; @@ -338,15 +169,27 @@ static void pmac_ide_transfer_cb(void *opaque, int ret) /* Calculate number of sectors */ offset = (ide_get_sector(s) << 9) + s->io_buffer_index; + qemu_sglist_init(&s->sg, DEVICE(m), io->len / MACIO_PAGE_SIZE + 1, + &address_space_memory); + qemu_sglist_add(&s->sg, io->addr, io->len); + s->io_buffer_size -= io->len; + s->io_buffer_index += io->len; + io->len = 0; + switch (s->dma_cmd) { case IDE_DMA_READ: - pmac_dma_read(s->blk, offset, io->len, pmac_ide_transfer_cb, io); + s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, 0x1, + pmac_ide_atapi_transfer_cb, io); break; case IDE_DMA_WRITE: - pmac_dma_write(s->blk, offset, io->len, pmac_ide_transfer_cb, io); + s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset, 0x1, + pmac_ide_transfer_cb, io); break; case IDE_DMA_TRIM: - pmac_dma_trim(s->blk, offset, io->len, pmac_ide_transfer_cb, io); + s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk), &s->sg, + offset, 0x1, ide_issue_trim, s->blk, + pmac_ide_transfer_cb, io, + DMA_DIRECTION_TO_DEVICE); break; default: abort();
Now that the DMA helpers are byte-aligned they can be called directly from the macio routines rather than emulating byte-aligned accesses via multiple block-level accesses. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> --- hw/ide/macio.c | 213 ++++++++------------------------------------------------ 1 file changed, 28 insertions(+), 185 deletions(-)