@@ -15,7 +15,6 @@ CONFIG_TWL92230=y
CONFIG_TSC2005=y
CONFIG_LM832X=y
CONFIG_TMP105=y
-CONFIG_STELLARIS=y
CONFIG_STELLARIS_INPUT=y
CONFIG_STELLARIS_ENET=y
CONFIG_SSD0303=y
@@ -92,7 +91,6 @@ CONFIG_STM32F2XX_USART=y
CONFIG_STM32F2XX_SYSCFG=y
CONFIG_STM32F2XX_ADC=y
CONFIG_STM32F2XX_SPI=y
-CONFIG_STM32F205_SOC=y
CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
@@ -1,18 +1,17 @@
obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o
obj-$(CONFIG_DIGIC) += digic_boards.o
obj-y += integratorcp.o mainstone.o musicpal.o nseries.o
-obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
+obj-y += omap_sx1.o palm.o realview.o spitz.o
obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
obj-$(CONFIG_ACPI) += virt-acpi-build.o
-obj-y += netduino2.o
obj-y += sysbus-fdt.o
-obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
+obj-y += exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
obj-$(CONFIG_DIGIC) += digic.o
+obj-$(CONFIG_ARM_V7M) += armv7m.o netduino2.o stellaris.o stm32f205_soc.o
obj-y += omap1.o omap2.o strongarm.o
obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o
-obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
In current QEMU, when CONFIG_ARM_V7M is not configured, armv7m_nvic.c and armv7m_systick.c won't be compiled. This causes dependency issues for armv7m SoC because armv7m uses the device "armv7m_nvic". This patch makes the compilation of armv7m.c and other v7m SoC dependent on CONFIG_ARM_V7M. Signed-off-by: Wei Huang <wei@redhat.com> --- default-configs/arm-softmmu.mak | 2 -- hw/arm/Makefile.objs | 7 +++---- 2 files changed, 3 insertions(+), 6 deletions(-)