| Message ID | 1501964858-5159-4-git-send-email-zuban32s@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 05/08/2017 23:27, Aleksandr Bezzubikov wrote: > On PCI init PCI bridges may need some extra info about bus number, > IO, memory and prefetchable memory to reserve. QEMU can provide this > with a special vendor-specific PCI capability. > Hi Aleksandr, > Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> > --- > hw/pci/pci_bridge.c | 29 +++++++++++++++++++++++++++++ > include/hw/pci/pci_bridge.h | 21 +++++++++++++++++++++ > 2 files changed, 50 insertions(+) > > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c > index 720119b..889950d 100644 > --- a/hw/pci/pci_bridge.c > +++ b/hw/pci/pci_bridge.c > @@ -408,6 +408,35 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, > br->bus_name = bus_name; > } > > + > +int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset, > + uint32_t bus_reserve, uint64_t io_reserve, > + uint64_t non_pref_mem_reserve, > + uint64_t pref_mem_reserve, > + Error **errp) > +{ > + size_t cap_len = sizeof(PCIBridgeQemuCap); > + PCIBridgeQemuCap cap = { > + .len = cap_len, > + .type = REDHAT_PCI_CAP_QEMU_RESERVE, I would change the type to: REDHAT_PCI_CAP_RESOURCE_RESERVE QEMU is less important here (I think) than "resource". > + .bus_res = bus_reserve, > + .io = io_reserve, > + .mem = non_pref_mem_reserve, > + .mem_pref = pref_mem_reserve > + }; > + > + int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR, > + cap_offset, cap_len, errp); > + if (offset < 0) { > + return offset; > + } > + > + memcpy(dev->config + offset + PCI_CAP_FLAGS, > + (char *)&cap + PCI_CAP_FLAGS, > + cap_len - PCI_CAP_FLAGS); > + return 0; > +} > + > static const TypeInfo pci_bridge_type_info = { > .name = TYPE_PCI_BRIDGE, > .parent = TYPE_PCI_DEVICE, > diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h > index ff7cbaa..be565f7 100644 > --- a/include/hw/pci/pci_bridge.h > +++ b/include/hw/pci/pci_bridge.h > @@ -67,4 +67,25 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, > #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ > #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */ > > +typedef struct PCIBridgeQemuCap { > + uint8_t id; /* Standard PCI capability header field */ > + uint8_t next; /* Standard PCI capability header field */ > + uint8_t len; /* Standard PCI vendor-specific capability header field */ > + uint8_t type; /* Red Hat vendor-specific capability type. > + Types are defined with REDHAT_PCI_CAP_ prefix */ > + > + uint32_t bus_res; /* Minimum number of buses to reserve */ > + uint64_t io; /* IO space to reserve */ > + uint64_t mem; /* Non-prefetchable memory to reserve */ > + uint64_t mem_pref; /* Prefetchable memory to reserve */ > +} PCIBridgeQemuCap; > + > +#define REDHAT_PCI_CAP_QEMU_RESERVE 1 > + > +int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset, > + uint32_t bus_reserve, uint64_t io_reserve, > + uint64_t non_pref_mem_reserve, > + uint64_t pref_mem_reserve, > + Error **errp); > + > #endif /* QEMU_PCI_BRIDGE_H */ > With the name change, the layout looks good to me: Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Thanks, Marcel
diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c index 720119b..889950d 100644 --- a/hw/pci/pci_bridge.c +++ b/hw/pci/pci_bridge.c @@ -408,6 +408,35 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, br->bus_name = bus_name; } + +int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset, + uint32_t bus_reserve, uint64_t io_reserve, + uint64_t non_pref_mem_reserve, + uint64_t pref_mem_reserve, + Error **errp) +{ + size_t cap_len = sizeof(PCIBridgeQemuCap); + PCIBridgeQemuCap cap = { + .len = cap_len, + .type = REDHAT_PCI_CAP_QEMU_RESERVE, + .bus_res = bus_reserve, + .io = io_reserve, + .mem = non_pref_mem_reserve, + .mem_pref = pref_mem_reserve + }; + + int offset = pci_add_capability(dev, PCI_CAP_ID_VNDR, + cap_offset, cap_len, errp); + if (offset < 0) { + return offset; + } + + memcpy(dev->config + offset + PCI_CAP_FLAGS, + (char *)&cap + PCI_CAP_FLAGS, + cap_len - PCI_CAP_FLAGS); + return 0; +} + static const TypeInfo pci_bridge_type_info = { .name = TYPE_PCI_BRIDGE, .parent = TYPE_PCI_DEVICE, diff --git a/include/hw/pci/pci_bridge.h b/include/hw/pci/pci_bridge.h index ff7cbaa..be565f7 100644 --- a/include/hw/pci/pci_bridge.h +++ b/include/hw/pci/pci_bridge.h @@ -67,4 +67,25 @@ void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */ +typedef struct PCIBridgeQemuCap { + uint8_t id; /* Standard PCI capability header field */ + uint8_t next; /* Standard PCI capability header field */ + uint8_t len; /* Standard PCI vendor-specific capability header field */ + uint8_t type; /* Red Hat vendor-specific capability type. + Types are defined with REDHAT_PCI_CAP_ prefix */ + + uint32_t bus_res; /* Minimum number of buses to reserve */ + uint64_t io; /* IO space to reserve */ + uint64_t mem; /* Non-prefetchable memory to reserve */ + uint64_t mem_pref; /* Prefetchable memory to reserve */ +} PCIBridgeQemuCap; + +#define REDHAT_PCI_CAP_QEMU_RESERVE 1 + +int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset, + uint32_t bus_reserve, uint64_t io_reserve, + uint64_t non_pref_mem_reserve, + uint64_t pref_mem_reserve, + Error **errp); + #endif /* QEMU_PCI_BRIDGE_H */
On PCI init PCI bridges may need some extra info about bus number, IO, memory and prefetchable memory to reserve. QEMU can provide this with a special vendor-specific PCI capability. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> --- hw/pci/pci_bridge.c | 29 +++++++++++++++++++++++++++++ include/hw/pci/pci_bridge.h | 21 +++++++++++++++++++++ 2 files changed, 50 insertions(+)