@@ -259,6 +259,7 @@ S: Maintained
F: target/xtensa/
F: hw/xtensa/
F: tests/tcg/xtensa/
+F: disas/xtensa.c
TriCore
M: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
@@ -21,6 +21,7 @@ common-obj-$(CONFIG_S390_DIS) += s390.o
common-obj-$(CONFIG_SH4_DIS) += sh4.o
common-obj-$(CONFIG_SPARC_DIS) += sparc.o
common-obj-$(CONFIG_LM32_DIS) += lm32.o
+common-obj-$(CONFIG_XTENSA_DIS) += xtensa.o
# TODO: As long as the TCG interpreter and its generated code depend
# on the QEMU target, we cannot compile the disassembler here.
new file mode 100644
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2017, Max Filippov, Open Source and Linux Lab.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the Open Source and Linux Lab nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "qemu/osdep.h"
+#include "disas/bfd.h"
+#include "hw/xtensa/xtensa-isa.h"
+
+int print_insn_xtensa(bfd_vma memaddr, struct disassemble_info *info)
+{
+ xtensa_isa isa = info->private_data;
+ xtensa_insnbuf insnbuf = xtensa_insnbuf_alloc(isa);
+ xtensa_insnbuf slotbuf = xtensa_insnbuf_alloc(isa);
+ bfd_byte *buffer = g_malloc(1);
+ int status = info->read_memory_func(memaddr, buffer, 1, info);
+ xtensa_format fmt;
+ unsigned slot, slots;
+ unsigned len;
+
+ if (status) {
+ info->memory_error_func(status, memaddr, info);
+ len = -1;
+ goto out;
+ }
+ len = xtensa_isa_length_from_chars(isa, buffer);
+ if (len == XTENSA_UNDEFINED) {
+ info->fprintf_func(info->stream, ".byte 0x%02x", buffer[0]);
+ len = 1;
+ goto out;
+ }
+ buffer = g_realloc(buffer, len);
+ status = info->read_memory_func(memaddr + 1, buffer + 1, len - 1, info);
+ if (status) {
+ info->fprintf_func(info->stream, ".byte 0x%02x", buffer[0]);
+ info->memory_error_func(status, memaddr + 1, info);
+ len = 1;
+ goto out;
+ }
+
+ xtensa_insnbuf_from_chars(isa, insnbuf, buffer, len);
+ fmt = xtensa_format_decode(isa, insnbuf);
+ if (fmt == XTENSA_UNDEFINED) {
+ unsigned i;
+
+ for (i = 0; i < len; ++i) {
+ info->fprintf_func(info->stream, "%s 0x%02x",
+ i ? ", " : ".byte ", buffer[i]);
+ }
+ goto out;
+ }
+ slots = xtensa_format_num_slots(isa, fmt);
+
+ if (slots > 1) {
+ info->fprintf_func(info->stream, "{ ");
+ }
+
+ for (slot = 0; slot < slots; ++slot) {
+ xtensa_opcode opc;
+ unsigned opnd, vopnd, opnds;
+
+ if (slot) {
+ info->fprintf_func(info->stream, "; ");
+ }
+ xtensa_format_get_slot(isa, fmt, slot, insnbuf, slotbuf);
+ opc = xtensa_opcode_decode(isa, fmt, slot, slotbuf);
+ if (opc == XTENSA_UNDEFINED) {
+ info->fprintf_func(info->stream, "???");
+ continue;
+ }
+ opnds = xtensa_opcode_num_operands(isa, opc);
+
+ info->fprintf_func(info->stream, "%s", xtensa_opcode_name(isa, opc));
+
+ for (opnd = vopnd = 0; opnd < opnds; ++opnd) {
+ if (xtensa_operand_is_visible(isa, opc, opnd)) {
+ uint32_t v = 0xbadc0de;
+ int rc;
+
+ info->fprintf_func(info->stream, vopnd ? ", " : "\t");
+ xtensa_operand_get_field(isa, opc, opnd, fmt, slot,
+ slotbuf, &v);
+ rc = xtensa_operand_decode(isa, opc, opnd, &v);
+ if (rc == XTENSA_UNDEFINED) {
+ info->fprintf_func(info->stream, "???");
+ } else if (xtensa_operand_is_register(isa, opc, opnd)) {
+ xtensa_regfile rf = xtensa_operand_regfile(isa, opc, opnd);
+
+ info->fprintf_func(info->stream, "%s%d",
+ xtensa_regfile_shortname(isa, rf), v);
+ } else if (xtensa_operand_is_PCrelative(isa, opc, opnd)) {
+ xtensa_operand_undo_reloc(isa, opc, opnd, &v, memaddr);
+ info->fprintf_func(info->stream, "0x%x", v);
+ } else {
+ info->fprintf_func(info->stream, "%d", v);
+ }
+ ++vopnd;
+ }
+ }
+ }
+ if (slots > 1) {
+ info->fprintf_func(info->stream, " }");
+ }
+
+out:
+ g_free(buffer);
+ xtensa_insnbuf_free(isa, insnbuf);
+ xtensa_insnbuf_free(isa, slotbuf);
+
+ return len;
+}
@@ -428,6 +428,7 @@ int print_insn_ia64 (bfd_vma, disassemble_info*);
int print_insn_lm32 (bfd_vma, disassemble_info*);
int print_insn_big_nios2 (bfd_vma, disassemble_info*);
int print_insn_little_nios2 (bfd_vma, disassemble_info*);
+int print_insn_xtensa (bfd_vma, disassemble_info*);
#if 0
/* Fetch the disassembler for a given BFD, if that support is available. */
@@ -93,6 +93,14 @@ static ObjectClass *xtensa_cpu_class_by_name(const char *cpu_model)
return oc;
}
+static void xtensa_cpu_disas_set_info(CPUState *cs, disassemble_info *info)
+{
+ XtensaCPU *cpu = XTENSA_CPU(cs);
+
+ info->private_data = cpu->env.config->isa;
+ info->print_insn = print_insn_xtensa;
+}
+
static void xtensa_cpu_realizefn(DeviceState *dev, Error **errp)
{
CPUState *cs = CPU(dev);
@@ -164,6 +172,7 @@ static void xtensa_cpu_class_init(ObjectClass *oc, void *data)
cc->do_unassigned_access = xtensa_cpu_do_unassigned_access;
#endif
cc->debug_excp_handler = xtensa_breakpoint_handler;
+ cc->disas_set_info = xtensa_cpu_disas_set_info;
cc->tcg_initialize = xtensa_translate_init;
dc->vmsd = &vmstate_xtensa_cpu;
}
Add disas/xtensa.c and use libisa for instruction decoding/opcode name lookup. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> --- MAINTAINERS | 1 + disas/Makefile.objs | 1 + disas/xtensa.c | 133 ++++++++++++++++++++++++++++++++++++++++++++++++++++ include/disas/bfd.h | 1 + target/xtensa/cpu.c | 9 ++++ 5 files changed, 145 insertions(+) create mode 100644 disas/xtensa.c