| Message ID | 1515742232-49096-1-git-send-email-jianjay.zhou@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 2018年01月12日 15:30, Jay Zhou wrote: > If netdev_add tap,id=net0,vhost=on failed in net_init_tap_one(), > the followed up device_add virtio-net-pci,netdev=net0 will fail > too, prints: > > TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD > ioctl() failed: Bad file descriptor > > The reason is that the fd of tap is closed when error occured after > calling net_init_tap_one(). > > I think the fd should be closed in these two case: > 1.tap_set_sndbuf() failed > 2.tap_set_sndbuf() succeeded but vhost failed to initialize with > vhostforce flag on > Meanwhile, the fd should not be closed just because vhost failed to > initialize but without vhostforce flag. So the followed up device_add > can fall back to userspace virtio successfully. > > Suggested-by: Michael S. Tsirkin <mst@redhat.com> > Suggested-by: Igor Mammedov <imammedo@redhat.com> > Suggested-by: Jason Wang <jasowang@redhat.com> > Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> > --- > net/tap.c | 18 +++++++++++++----- > 1 file changed, 13 insertions(+), 5 deletions(-) > > diff --git a/net/tap.c b/net/tap.c > index 979e622..3ed72eb 100644 > --- a/net/tap.c > +++ b/net/tap.c > @@ -651,6 +651,9 @@ static void net_init_tap_one(const NetdevTapOptions *tap, NetClientState *peer, > tap_set_sndbuf(s->fd, tap, &err); > if (err) { > error_propagate(errp, err); > + if (!tap->has_fd && !tap->has_fds) { > + close(fd); > + } > return; > } > > @@ -687,14 +690,14 @@ static void net_init_tap_one(const NetdevTapOptions *tap, NetClientState *peer, > vhostfd = monitor_fd_param(cur_mon, vhostfdname, &err); > if (vhostfd == -1) { > error_propagate(errp, err); > - return; > + goto cleanup; > } > } else { > vhostfd = open("/dev/vhost-net", O_RDWR); > if (vhostfd < 0) { > error_setg_errno(errp, errno, > "tap: open vhost char device failed"); > - return; > + goto cleanup; > } > fcntl(vhostfd, F_SETFL, O_NONBLOCK); > } > @@ -704,11 +707,18 @@ static void net_init_tap_one(const NetdevTapOptions *tap, NetClientState *peer, > if (!s->vhost_net) { > error_setg(errp, > "vhost-net requested but could not be initialized"); So error_setg() is not appropriate here consider it was not trated as an error. We probably just need some warning. > - return; > + goto cleanup; > } > } else if (vhostfdname) { > error_setg(errp, "vhostfd(s)= is not valid without vhost"); > } > + > +cleanup: > + if (!tap->has_fd && !tap->has_fds && tap->has_vhostforce && > + tap->vhostforce) { > + close(fd); I would still let caller to decide whether or not to close the fd. Thanks > + } > + return; > } > > static int get_fds(char *str, char *fds[], int max) > @@ -877,7 +887,6 @@ free_fail: > vnet_hdr, fd, &err); > if (err) { > error_propagate(errp, err); > - close(fd); > return -1; > } > } else { > @@ -916,7 +925,6 @@ free_fail: > vhostfdname, vnet_hdr, fd, &err); > if (err) { > error_propagate(errp, err); > - close(fd); > return -1; > } > }
> -----Original Message----- > From: Jason Wang [mailto:jasowang@redhat.com] > Sent: Monday, January 15, 2018 3:21 PM > To: Zhoujian (jay) <jianjay.zhou@huawei.com>; qemu-devel@nongnu.org > Cc: mst@redhat.com; imammedo@redhat.com; Huangweidong (C) > <weidong.huang@huawei.com>; wangxin (U) <wangxinxin.wang@huawei.com>; Gonglei > (Arei) <arei.gonglei@huawei.com> > Subject: Re: [PATCH] tap: close fd conditionally when error occured > > > > On 2018年01月12日 15:30, Jay Zhou wrote: > > If netdev_add tap,id=net0,vhost=on failed in net_init_tap_one(), the > > followed up device_add virtio-net-pci,netdev=net0 will fail too, > > prints: > > > > TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD > > ioctl() failed: Bad file descriptor > > > > The reason is that the fd of tap is closed when error occured after > > calling net_init_tap_one(). > > > > I think the fd should be closed in these two case: > > 1.tap_set_sndbuf() failed > > 2.tap_set_sndbuf() succeeded but vhost failed to initialize with > > vhostforce flag on > > Meanwhile, the fd should not be closed just because vhost failed to > > initialize but without vhostforce flag. So the followed up device_add > > can fall back to userspace virtio successfully. > > > > Suggested-by: Michael S. Tsirkin <mst@redhat.com> > > Suggested-by: Igor Mammedov <imammedo@redhat.com> > > Suggested-by: Jason Wang <jasowang@redhat.com> > > Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> > > --- > > net/tap.c | 18 +++++++++++++----- > > 1 file changed, 13 insertions(+), 5 deletions(-) > > > > diff --git a/net/tap.c b/net/tap.c > > index 979e622..3ed72eb 100644 > > --- a/net/tap.c > > +++ b/net/tap.c > > @@ -651,6 +651,9 @@ static void net_init_tap_one(const NetdevTapOptions > *tap, NetClientState *peer, > > tap_set_sndbuf(s->fd, tap, &err); > > if (err) { > > error_propagate(errp, err); > > + if (!tap->has_fd && !tap->has_fds) { > > + close(fd); > > + } > > return; > > } > > > > @@ -687,14 +690,14 @@ static void net_init_tap_one(const NetdevTapOptions > *tap, NetClientState *peer, > > vhostfd = monitor_fd_param(cur_mon, vhostfdname, &err); > > if (vhostfd == -1) { > > error_propagate(errp, err); > > - return; > > + goto cleanup; > > } > > } else { > > vhostfd = open("/dev/vhost-net", O_RDWR); > > if (vhostfd < 0) { > > error_setg_errno(errp, errno, > > "tap: open vhost char device failed"); > > - return; > > + goto cleanup; > > } > > fcntl(vhostfd, F_SETFL, O_NONBLOCK); > > } > > @@ -704,11 +707,18 @@ static void net_init_tap_one(const NetdevTapOptions > *tap, NetClientState *peer, > > if (!s->vhost_net) { > > error_setg(errp, > > "vhost-net requested but could not be > > initialized"); > > So error_setg() is not appropriate here consider it was not trated as an > error. We probably just need some warning. Should it be warning too if vhostforce flag on? > > > - return; > > + goto cleanup; > > } > > } else if (vhostfdname) { > > error_setg(errp, "vhostfd(s)= is not valid without vhost"); > > } > > + > > +cleanup: > > + if (!tap->has_fd && !tap->has_fds && tap->has_vhostforce && > > + tap->vhostforce) { > > + close(fd); > > I would still let caller to decide whether or not to close the fd. How about moving tap_set_sndbuf() out of net_init_tap_one()? So the caller could decide whether or not close the fd easily(The reason is explained in the commit message). Any better suggestion? Regards, Jay > > Thanks > > > + } > > + return; > > } > > > > static int get_fds(char *str, char *fds[], int max) @@ -877,7 +887,6 > > @@ free_fail: > > vnet_hdr, fd, &err); > > if (err) { > > error_propagate(errp, err); > > - close(fd); > > return -1; > > } > > } else { > > @@ -916,7 +925,6 @@ free_fail: > > vhostfdname, vnet_hdr, fd, &err); > > if (err) { > > error_propagate(errp, err); > > - close(fd); > > return -1; > > } > > }
diff --git a/net/tap.c b/net/tap.c index 979e622..3ed72eb 100644 --- a/net/tap.c +++ b/net/tap.c @@ -651,6 +651,9 @@ static void net_init_tap_one(const NetdevTapOptions *tap, NetClientState *peer, tap_set_sndbuf(s->fd, tap, &err); if (err) { error_propagate(errp, err); + if (!tap->has_fd && !tap->has_fds) { + close(fd); + } return; } @@ -687,14 +690,14 @@ static void net_init_tap_one(const NetdevTapOptions *tap, NetClientState *peer, vhostfd = monitor_fd_param(cur_mon, vhostfdname, &err); if (vhostfd == -1) { error_propagate(errp, err); - return; + goto cleanup; } } else { vhostfd = open("/dev/vhost-net", O_RDWR); if (vhostfd < 0) { error_setg_errno(errp, errno, "tap: open vhost char device failed"); - return; + goto cleanup; } fcntl(vhostfd, F_SETFL, O_NONBLOCK); } @@ -704,11 +707,18 @@ static void net_init_tap_one(const NetdevTapOptions *tap, NetClientState *peer, if (!s->vhost_net) { error_setg(errp, "vhost-net requested but could not be initialized"); - return; + goto cleanup; } } else if (vhostfdname) { error_setg(errp, "vhostfd(s)= is not valid without vhost"); } + +cleanup: + if (!tap->has_fd && !tap->has_fds && tap->has_vhostforce && + tap->vhostforce) { + close(fd); + } + return; } static int get_fds(char *str, char *fds[], int max) @@ -877,7 +887,6 @@ free_fail: vnet_hdr, fd, &err); if (err) { error_propagate(errp, err); - close(fd); return -1; } } else { @@ -916,7 +925,6 @@ free_fail: vhostfdname, vnet_hdr, fd, &err); if (err) { error_propagate(errp, err); - close(fd); return -1; } }
If netdev_add tap,id=net0,vhost=on failed in net_init_tap_one(), the followed up device_add virtio-net-pci,netdev=net0 will fail too, prints: TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD ioctl() failed: Bad file descriptor The reason is that the fd of tap is closed when error occured after calling net_init_tap_one(). I think the fd should be closed in these two case: 1.tap_set_sndbuf() failed 2.tap_set_sndbuf() succeeded but vhost failed to initialize with vhostforce flag on Meanwhile, the fd should not be closed just because vhost failed to initialize but without vhostforce flag. So the followed up device_add can fall back to userspace virtio successfully. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> --- net/tap.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)