@@ -233,6 +233,11 @@ static void s390_ipl_set_boot_menu(S390IPLState *ipl)
switch (ipl->iplb.pbt) {
case S390_IPL_TYPE_CCW:
+ /* In the absence of -boot menu, use zipl parameters */
+ if (!qemu_opt_get(opts, "menu")) {
+ *flags |= QIPL_FLAG_BM_OPTS_ZIPL;
+ return;
+ }
break;
default:
error_report("boot menu is not supported for this device type.");
@@ -93,6 +93,7 @@ void s390_reipl_request(void);
/* Boot Menu flags */
#define QIPL_FLAG_BM_OPTS_CMD 0x80
+#define QIPL_FLAG_BM_OPTS_ZIPL 0x40
/*
* The QEMU IPL Parameters will be stored at absolute address
@@ -76,6 +76,7 @@ extern IplParameterBlock iplb __attribute__((__aligned__(PAGE_SIZE)));
/* Boot Menu flags */
#define QIPL_FLAG_BM_OPTS_CMD 0x80
+#define QIPL_FLAG_BM_OPTS_ZIPL 0x40
/*
* This definition must be kept in sync with the defininition
@@ -20,6 +20,7 @@ QemuIplParameters qipl;
#define LOADPARM_PROMPT "PROMPT "
#define LOADPARM_EMPTY "........"
+#define BOOT_MENU_FLAG_MASK (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL)
/*
* Priniciples of Operations (SA22-7832-09) chapter 17 requires that
@@ -91,7 +92,7 @@ static void menu_setup(void)
switch (iplb.pbt) {
case S390_IPL_TYPE_CCW:
- menu_set_parms(qipl.qipl_flags & QIPL_FLAG_BM_OPTS_CMD,
+ menu_set_parms(qipl.qipl_flags & BOOT_MENU_FLAG_MASK,
qipl.boot_menu_timeout);
return;
}
@@ -18,6 +18,10 @@
#define KEYCODE_BACKSP '\177'
#define KEYCODE_ENTER '\r'
+/* Offsets from zipl fields to zipl banner start */
+#define ZIPL_TIMEOUT_OFFSET 138
+#define ZIPL_FLAG_OFFSET 140
+
#define TOD_CLOCK_MILLISECOND 0x3e8000
#define LOW_CORE_EXTERNAL_INT_ADDR 0x86
@@ -187,6 +191,16 @@ int menu_get_zipl_boot_index(const char *menu_data)
{
size_t len;
int entries;
+ uint16_t zipl_flag = *(uint16_t *)(menu_data - ZIPL_FLAG_OFFSET);
+ uint16_t zipl_timeout = *(uint16_t *)(menu_data - ZIPL_TIMEOUT_OFFSET);
+
+ if (flag == QIPL_FLAG_BM_OPTS_ZIPL) {
+ if (!zipl_flag) {
+ return 0; /* Boot default */
+ }
+ /* zipl stores timeout as seconds */
+ timeout = zipl_timeout * 1000;
+ }
/* Print and count all menu items, including the banner */
for (entries = 0; *menu_data; entries++) {
If no boot menu options are present, then flag the boot menu to use the zipl options that were set in the zipl configuration file (and stored on disk by zipl). These options are found at some offset prior to the start of the zipl boot menu banner. The zipl timeout value is limited to a 16-bit unsigned integer and stored as seconds, so we take care to convert it to milliseconds in order to conform to the rest of the boot menu functionality. This is limited to CCW devices. For reference, the zipl configuration file uses the following fields in the menu section: prompt=1 enable the boot menu timeout=X set the timeout to X seconds To explicitly disregard any boot menu options, then menu=off or <bootmenu enable='no' ... /> must be specified. Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com> --- hw/s390x/ipl.c | 5 +++++ hw/s390x/ipl.h | 1 + pc-bios/s390-ccw/iplb.h | 1 + pc-bios/s390-ccw/main.c | 3 ++- pc-bios/s390-ccw/menu.c | 14 ++++++++++++++ 5 files changed, 23 insertions(+), 1 deletion(-)