@@ -28,6 +28,7 @@
#include "sysemu/kvm.h"
#include "sysemu/hvf.h"
#include "sysemu/cpus.h"
+#include "sysemu/numa.h"
#include "kvm_i386.h"
#include "sev_i386.h"
@@ -338,67 +339,19 @@ static void encode_cache_cpuid80000006(CPUCacheInfo *l2,
}
}
-/*
- * Definitions used for building CPUID Leaf 0x8000001D and 0x8000001E
- * Please refer to the AMD64 Architecture Programmer’s Manual Volume 3.
- * Define the constants to build the cpu topology. Right now, TOPOEXT
- * feature is enabled only on EPYC. So, these constants are based on
- * EPYC supported configurations. We may need to handle the cases if
- * these values change in future.
- */
-/* Maximum core complexes in a node */
-#define MAX_CCX 2
-/* Maximum cores in a core complex */
-#define MAX_CORES_IN_CCX 4
-/* Maximum cores in a node */
-#define MAX_CORES_IN_NODE 8
-/* Maximum nodes in a socket */
-#define MAX_NODES_PER_SOCKET 4
-
-/*
- * Figure out the number of nodes required to build this config.
- * Max cores in a node is 8
- */
-static int nodes_in_socket(int nr_cores)
-{
- int nodes;
-
- nodes = DIV_ROUND_UP(nr_cores, MAX_CORES_IN_NODE);
-
- /* Hardware does not support config with 3 nodes, return 4 in that case */
- return (nodes == 3) ? 4 : nodes;
-}
-
-/*
- * Decide the number of cores in a core complex with the given nr_cores using
- * following set constants MAX_CCX, MAX_CORES_IN_CCX, MAX_CORES_IN_NODE and
- * MAX_NODES_PER_SOCKET. Maintain symmetry as much as possible
- * L3 cache is shared across all cores in a core complex. So, this will also
- * tell us how many cores are sharing the L3 cache.
- */
-static int cores_in_core_complex(int nr_cores)
-{
- int nodes;
-
- /* Check if we can fit all the cores in one core complex */
- if (nr_cores <= MAX_CORES_IN_CCX) {
- return nr_cores;
- }
- /* Get the number of nodes required to build this config */
- nodes = nodes_in_socket(nr_cores);
-
- /*
- * Divide the cores accros all the core complexes
- * Return rounded up value
- */
- return DIV_ROUND_UP(nr_cores, nodes * MAX_CCX);
-}
-
/* Encode cache info for CPUID[8000001D] */
-static void encode_cache_cpuid8000001d(CPUCacheInfo *cache, CPUState *cs,
- uint32_t *eax, uint32_t *ebx,
- uint32_t *ecx, uint32_t *edx)
+static void encode_cache_cpuid8000001d(CPUCacheInfo *cache,
+ uint32_t *eax, uint32_t *ebx,
+ uint32_t *ecx, uint32_t *edx)
{
+ MachineState *ms = MACHINE(qdev_get_machine());
+ X86CPUTopoInfo topo_info = {
+ .numa_nodes = nb_numa_nodes,
+ .nr_sockets = ms->smp.sockets,
+ .nr_cores = ms->smp.cores,
+ .nr_threads = ms->smp.threads,
+ };
+
uint32_t l3_cores;
assert(cache->size == cache->line_size * cache->associativity *
cache->partitions * cache->sets);
@@ -408,10 +361,10 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache, CPUState *cs,
/* L3 is shared among multiple cores */
if (cache->level == 3) {
- l3_cores = cores_in_core_complex(cs->nr_cores);
- *eax |= ((l3_cores * cs->nr_threads) - 1) << 14;
+ l3_cores = cores_in_ccx(&topo_info);
+ *eax |= ((l3_cores * topo_info.nr_threads) - 1) << 14;
} else {
- *eax |= ((cs->nr_threads - 1) << 14);
+ *eax |= ((topo_info.nr_threads - 1) << 14);
}
assert(cache->line_size > 0);
@@ -431,56 +384,28 @@ static void encode_cache_cpuid8000001d(CPUCacheInfo *cache, CPUState *cs,
(cache->complex_indexing ? CACHE_COMPLEX_IDX : 0);
}
-/* Data structure to hold the configuration info for a given core index */
-struct core_topology {
- /* core complex id of the current core index */
- int ccx_id;
- /*
- * Adjusted core index for this core in the topology
- * This can be 0,1,2,3 with max 4 cores in a core complex
- */
- int core_id;
- /* Node id for this core index */
- int node_id;
- /* Number of nodes in this config */
- int num_nodes;
-};
-
-/*
- * Build the configuration closely match the EPYC hardware. Using the EPYC
- * hardware configuration values (MAX_CCX, MAX_CORES_IN_CCX, MAX_CORES_IN_NODE)
- * right now. This could change in future.
- * nr_cores : Total number of cores in the config
- * core_id : Core index of the current CPU
- * topo : Data structure to hold all the config info for this core index
- */
-static void build_core_topology(int nr_cores, int core_id,
- struct core_topology *topo)
-{
- int nodes, cores_in_ccx;
-
- /* First get the number of nodes required */
- nodes = nodes_in_socket(nr_cores);
-
- cores_in_ccx = cores_in_core_complex(nr_cores);
-
- topo->node_id = core_id / (cores_in_ccx * MAX_CCX);
- topo->ccx_id = (core_id % (cores_in_ccx * MAX_CCX)) / cores_in_ccx;
- topo->core_id = core_id % cores_in_ccx;
- topo->num_nodes = nodes;
-}
-
/* Encode cache info for CPUID[8000001E] */
-static void encode_topo_cpuid8000001e(CPUState *cs, X86CPU *cpu,
- uint32_t *eax, uint32_t *ebx,
- uint32_t *ecx, uint32_t *edx)
+static void encode_topo_cpuid8000001e(CPUX86State *env,
+ uint32_t *eax, uint32_t *ebx,
+ uint32_t *ecx, uint32_t *edx)
{
- struct core_topology topo = {0};
- unsigned long nodes;
- int shift;
+ X86CPUTopoIDs topo_ids = { 0 };
+ unsigned long nodes, shift;
+ X86CPU *cpu = env_archcpu(env);
+ CPUState *cs = env_cpu(env);
+ MachineState *ms = MACHINE(qdev_get_machine());
+ X86CPUTopoInfo topo_info = {
+ .numa_nodes = nb_numa_nodes,
+ .nr_sockets = ms->smp.sockets,
+ .nr_cores = ms->smp.cores,
+ .nr_threads = ms->smp.threads,
+ };
+
+ nodes = nodes_in_pkg(&topo_info);
+ x86_topo_ids_from_idx_epyc(&topo_info, cs->cpu_index, &topo_ids);
- build_core_topology(cs->nr_cores, cpu->core_id, &topo);
*eax = cpu->apic_id;
+
/*
* CPUID_Fn8000001E_EBX
* 31:16 Reserved
@@ -496,11 +421,12 @@ static void encode_topo_cpuid8000001e(CPUState *cs, X86CPU *cpu,
* 3 Core complex id
* 1:0 Core id
*/
- if (cs->nr_threads - 1) {
- *ebx = ((cs->nr_threads - 1) << 8) | (topo.node_id << 3) |
- (topo.ccx_id << 2) | topo.core_id;
+ if (topo_info.nr_threads - 1) {
+ *ebx = ((topo_info.nr_threads - 1) << 8) | (topo_ids.node_id << 3) |
+ (topo_ids.ccx_id << 2) | topo_ids.core_id;
} else {
- *ebx = (topo.node_id << 4) | (topo.ccx_id << 3) | topo.core_id;
+ *ebx = (topo_ids.node_id << 4) | (topo_ids.ccx_id << 3) |
+ topo_ids.core_id;
}
/*
* CPUID_Fn8000001E_ECX
@@ -510,9 +436,8 @@ static void encode_topo_cpuid8000001e(CPUState *cs, X86CPU *cpu,
* 2 Socket id
* 1:0 Node id
*/
- if (topo.num_nodes <= 4) {
- *ecx = ((topo.num_nodes - 1) << 8) | (cpu->socket_id << 2) |
- topo.node_id;
+ if (nodes <= 4) {
+ *ecx = ((nodes - 1) << 8) | (topo_ids.pkg_id << 2) | topo_ids.node_id;
} else {
/*
* Node id fix up. Actual hardware supports up to 4 nodes. But with
@@ -527,12 +452,12 @@ static void encode_topo_cpuid8000001e(CPUState *cs, X86CPU *cpu,
* number of nodes. find_last_bit returns last set bit(0 based). Left
* shift(+1) the socket id to represent all the nodes.
*/
- nodes = topo.num_nodes - 1;
+ nodes = nodes - 1;
shift = find_last_bit(&nodes, 8);
- *ecx = ((topo.num_nodes - 1) << 8) | (cpu->socket_id << (shift + 1)) |
- topo.node_id;
+ *ecx = (nodes << 8) | (topo_ids.pkg_id << (shift + 1)) | topo_ids.node_id;
}
*edx = 0;
+
}
/*
@@ -4580,19 +4505,19 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
}
switch (count) {
case 0: /* L1 dcache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l1d_cache, cs,
+ encode_cache_cpuid8000001d(env->cache_info_amd.l1d_cache,
eax, ebx, ecx, edx);
break;
case 1: /* L1 icache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l1i_cache, cs,
+ encode_cache_cpuid8000001d(env->cache_info_amd.l1i_cache,
eax, ebx, ecx, edx);
break;
case 2: /* L2 cache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l2_cache, cs,
+ encode_cache_cpuid8000001d(env->cache_info_amd.l2_cache,
eax, ebx, ecx, edx);
break;
case 3: /* L3 cache info */
- encode_cache_cpuid8000001d(env->cache_info_amd.l3_cache, cs,
+ encode_cache_cpuid8000001d(env->cache_info_amd.l3_cache,
eax, ebx, ecx, edx);
break;
default: /* end of info */
@@ -4602,7 +4527,7 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
break;
case 0x8000001E:
assert(cpu->core_id <= 255);
- encode_topo_cpuid8000001e(cs, cpu,
+ encode_topo_cpuid8000001e(env,
eax, ebx, ecx, edx);
break;
case 0xC0000000:
Use the new epyc mode functions and delete the unused code. Signed-off-by: Babu Moger <babu.moger@amd.com> --- target/i386/cpu.c | 171 +++++++++++++++-------------------------------------- 1 file changed, 48 insertions(+), 123 deletions(-)