@@ -408,14 +408,7 @@ static bool vfio_devices_all_dirty_tracking(VFIOContainer *container)
return false;
}
- if (!migration->v2 &&
- (vbasedev->pre_copy_dirty_page_tracking == ON_OFF_AUTO_OFF) &&
- (migration->device_state_v1 & VFIO_DEVICE_STATE_V1_RUNNING)) {
- return false;
- }
-
- if (migration->v2 &&
- vbasedev->pre_copy_dirty_page_tracking == ON_OFF_AUTO_OFF &&
+ if (vbasedev->pre_copy_dirty_page_tracking == ON_OFF_AUTO_OFF &&
migration->device_state == VFIO_DEVICE_STATE_RUNNING) {
return false;
}
@@ -445,13 +438,7 @@ static bool vfio_devices_all_running_and_mig_active(VFIOContainer *container)
return false;
}
- if (!migration->v2 &&
- migration->device_state_v1 & VFIO_DEVICE_STATE_V1_RUNNING) {
- continue;
- }
-
- if (migration->v2 &&
- migration->device_state == VFIO_DEVICE_STATE_RUNNING) {
+ if (migration->device_state == VFIO_DEVICE_STATE_RUNNING) {
continue;
} else {
return false;
@@ -153,220 +153,6 @@ reset_device:
return ret;
}
-static inline int vfio_mig_access(VFIODevice *vbasedev, void *val, int count,
- off_t off, bool iswrite)
-{
- int ret;
-
- ret = iswrite ? pwrite(vbasedev->fd, val, count, off) :
- pread(vbasedev->fd, val, count, off);
- if (ret < count) {
- error_report("vfio_mig_%s %d byte %s: failed at offset 0x%"
- HWADDR_PRIx", err: %s", iswrite ? "write" : "read", count,
- vbasedev->name, off, strerror(errno));
- return (ret < 0) ? ret : -EINVAL;
- }
- return 0;
-}
-
-static int vfio_mig_rw(VFIODevice *vbasedev, __u8 *buf, size_t count,
- off_t off, bool iswrite)
-{
- int ret, done = 0;
- __u8 *tbuf = buf;
-
- while (count) {
- int bytes = 0;
-
- if (count >= 8 && !(off % 8)) {
- bytes = 8;
- } else if (count >= 4 && !(off % 4)) {
- bytes = 4;
- } else if (count >= 2 && !(off % 2)) {
- bytes = 2;
- } else {
- bytes = 1;
- }
-
- ret = vfio_mig_access(vbasedev, tbuf, bytes, off, iswrite);
- if (ret) {
- return ret;
- }
-
- count -= bytes;
- done += bytes;
- off += bytes;
- tbuf += bytes;
- }
- return done;
-}
-
-#define vfio_mig_read(f, v, c, o) vfio_mig_rw(f, (__u8 *)v, c, o, false)
-#define vfio_mig_write(f, v, c, o) vfio_mig_rw(f, (__u8 *)v, c, o, true)
-
-#define VFIO_MIG_STRUCT_OFFSET(f) \
- offsetof(struct vfio_device_migration_info, f)
-/*
- * Change the device_state register for device @vbasedev. Bits set in @mask
- * are preserved, bits set in @value are set, and bits not set in either @mask
- * or @value are cleared in device_state. If the register cannot be accessed,
- * the resulting state would be invalid, or the device enters an error state,
- * an error is returned.
- */
-
-static int vfio_migration_v1_set_state(VFIODevice *vbasedev, uint32_t mask,
- uint32_t value)
-{
- VFIOMigration *migration = vbasedev->migration;
- VFIORegion *region = &migration->region;
- off_t dev_state_off = region->fd_offset +
- VFIO_MIG_STRUCT_OFFSET(device_state);
- uint32_t device_state;
- int ret;
-
- ret = vfio_mig_read(vbasedev, &device_state, sizeof(device_state),
- dev_state_off);
- if (ret < 0) {
- return ret;
- }
-
- device_state = (device_state & mask) | value;
-
- if (!VFIO_DEVICE_STATE_VALID(device_state)) {
- return -EINVAL;
- }
-
- ret = vfio_mig_write(vbasedev, &device_state, sizeof(device_state),
- dev_state_off);
- if (ret < 0) {
- int rret;
-
- rret = vfio_mig_read(vbasedev, &device_state, sizeof(device_state),
- dev_state_off);
-
- if ((rret < 0) || (VFIO_DEVICE_STATE_IS_ERROR(device_state))) {
- hw_error("%s: Device in error state 0x%x", vbasedev->name,
- device_state);
- return rret ? rret : -EIO;
- }
- return ret;
- }
-
- migration->device_state_v1 = device_state;
- trace_vfio_migration_v1_set_state(vbasedev->name, device_state);
- return 0;
-}
-
-static void *get_data_section_size(VFIORegion *region, uint64_t data_offset,
- uint64_t data_size, uint64_t *size)
-{
- void *ptr = NULL;
- uint64_t limit = 0;
- int i;
-
- if (!region->mmaps) {
- if (size) {
- *size = MIN(data_size, region->size - data_offset);
- }
- return ptr;
- }
-
- for (i = 0; i < region->nr_mmaps; i++) {
- VFIOMmap *map = region->mmaps + i;
-
- if ((data_offset >= map->offset) &&
- (data_offset < map->offset + map->size)) {
-
- /* check if data_offset is within sparse mmap areas */
- ptr = map->mmap + data_offset - map->offset;
- if (size) {
- *size = MIN(data_size, map->offset + map->size - data_offset);
- }
- break;
- } else if ((data_offset < map->offset) &&
- (!limit || limit > map->offset)) {
- /*
- * data_offset is not within sparse mmap areas, find size of
- * non-mapped area. Check through all list since region->mmaps list
- * is not sorted.
- */
- limit = map->offset;
- }
- }
-
- if (!ptr && size) {
- *size = limit ? MIN(data_size, limit - data_offset) : data_size;
- }
- return ptr;
-}
-
-static int vfio_save_buffer(QEMUFile *f, VFIODevice *vbasedev, uint64_t *size)
-{
- VFIOMigration *migration = vbasedev->migration;
- VFIORegion *region = &migration->region;
- uint64_t data_offset = 0, data_size = 0, sz;
- int ret;
-
- ret = vfio_mig_read(vbasedev, &data_offset, sizeof(data_offset),
- region->fd_offset + VFIO_MIG_STRUCT_OFFSET(data_offset));
- if (ret < 0) {
- return ret;
- }
-
- ret = vfio_mig_read(vbasedev, &data_size, sizeof(data_size),
- region->fd_offset + VFIO_MIG_STRUCT_OFFSET(data_size));
- if (ret < 0) {
- return ret;
- }
-
- trace_vfio_save_buffer(vbasedev->name, data_offset, data_size,
- migration->pending_bytes);
-
- qemu_put_be64(f, data_size);
- sz = data_size;
-
- while (sz) {
- void *buf;
- uint64_t sec_size;
- bool buf_allocated = false;
-
- buf = get_data_section_size(region, data_offset, sz, &sec_size);
-
- if (!buf) {
- buf = g_try_malloc(sec_size);
- if (!buf) {
- error_report("%s: Error allocating buffer ", __func__);
- return -ENOMEM;
- }
- buf_allocated = true;
-
- ret = vfio_mig_read(vbasedev, buf, sec_size,
- region->fd_offset + data_offset);
- if (ret < 0) {
- g_free(buf);
- return ret;
- }
- }
-
- qemu_put_buffer(f, buf, sec_size);
-
- if (buf_allocated) {
- g_free(buf);
- }
- sz -= sec_size;
- data_offset += sec_size;
- }
-
- ret = qemu_file_get_error(f);
-
- if (!ret && size) {
- *size = data_size;
- }
-
- bytes_transferred += data_size;
- return ret;
-}
-
static int vfio_load_buffer(QEMUFile *f, VFIODevice *vbasedev,
uint64_t data_size)
{
@@ -379,96 +165,6 @@ static int vfio_load_buffer(QEMUFile *f, VFIODevice *vbasedev,
return ret;
}
-static int vfio_v1_load_buffer(QEMUFile *f, VFIODevice *vbasedev,
- uint64_t data_size)
-{
- VFIORegion *region = &vbasedev->migration->region;
- uint64_t data_offset = 0, size, report_size;
- int ret;
-
- do {
- ret = vfio_mig_read(vbasedev, &data_offset, sizeof(data_offset),
- region->fd_offset + VFIO_MIG_STRUCT_OFFSET(data_offset));
- if (ret < 0) {
- return ret;
- }
-
- if (data_offset + data_size > region->size) {
- /*
- * If data_size is greater than the data section of migration region
- * then iterate the write buffer operation. This case can occur if
- * size of migration region at destination is smaller than size of
- * migration region at source.
- */
- report_size = size = region->size - data_offset;
- data_size -= size;
- } else {
- report_size = size = data_size;
- data_size = 0;
- }
-
- trace_vfio_v1_load_state_device_data(vbasedev->name, data_offset, size);
-
- while (size) {
- void *buf;
- uint64_t sec_size;
- bool buf_alloc = false;
-
- buf = get_data_section_size(region, data_offset, size, &sec_size);
-
- if (!buf) {
- buf = g_try_malloc(sec_size);
- if (!buf) {
- error_report("%s: Error allocating buffer ", __func__);
- return -ENOMEM;
- }
- buf_alloc = true;
- }
-
- qemu_get_buffer(f, buf, sec_size);
-
- if (buf_alloc) {
- ret = vfio_mig_write(vbasedev, buf, sec_size,
- region->fd_offset + data_offset);
- g_free(buf);
-
- if (ret < 0) {
- return ret;
- }
- }
- size -= sec_size;
- data_offset += sec_size;
- }
-
- ret = vfio_mig_write(vbasedev, &report_size, sizeof(report_size),
- region->fd_offset + VFIO_MIG_STRUCT_OFFSET(data_size));
- if (ret < 0) {
- return ret;
- }
- } while (data_size);
-
- return 0;
-}
-
-static int vfio_update_pending(VFIODevice *vbasedev)
-{
- VFIOMigration *migration = vbasedev->migration;
- VFIORegion *region = &migration->region;
- uint64_t pending_bytes = 0;
- int ret;
-
- ret = vfio_mig_read(vbasedev, &pending_bytes, sizeof(pending_bytes),
- region->fd_offset + VFIO_MIG_STRUCT_OFFSET(pending_bytes));
- if (ret < 0) {
- migration->pending_bytes = 0;
- return ret;
- }
-
- migration->pending_bytes = pending_bytes;
- trace_vfio_update_pending(vbasedev->name, pending_bytes);
- return 0;
-}
-
static int vfio_save_device_config_state(QEMUFile *f, void *opaque)
{
VFIODevice *vbasedev = opaque;
@@ -521,15 +217,6 @@ static void vfio_migration_cleanup(VFIODevice *vbasedev)
migration->data_fd = -1;
}
-static void vfio_migration_v1_cleanup(VFIODevice *vbasedev)
-{
- VFIOMigration *migration = vbasedev->migration;
-
- if (migration->region.mmaps) {
- vfio_region_unmap(&migration->region);
- }
-}
-
static int vfio_query_stop_copy_size(VFIODevice *vbasedev,
uint64_t *stop_copy_size)
{
@@ -604,49 +291,6 @@ static int vfio_save_setup(QEMUFile *f, void *opaque)
return qemu_file_get_error(f);
}
-static int vfio_v1_save_setup(QEMUFile *f, void *opaque)
-{
- VFIODevice *vbasedev = opaque;
- VFIOMigration *migration = vbasedev->migration;
- int ret;
-
- trace_vfio_v1_save_setup(vbasedev->name);
-
- qemu_put_be64(f, VFIO_MIG_FLAG_DEV_SETUP_STATE);
-
- if (migration->region.mmaps) {
- /*
- * Calling vfio_region_mmap() from migration thread. Memory API called
- * from this function require locking the iothread when called from
- * outside the main loop thread.
- */
- qemu_mutex_lock_iothread();
- ret = vfio_region_mmap(&migration->region);
- qemu_mutex_unlock_iothread();
- if (ret) {
- error_report("%s: Failed to mmap VFIO migration region: %s",
- vbasedev->name, strerror(-ret));
- error_report("%s: Falling back to slow path", vbasedev->name);
- }
- }
-
- ret = vfio_migration_v1_set_state(vbasedev, VFIO_DEVICE_STATE_MASK,
- VFIO_DEVICE_STATE_V1_SAVING);
- if (ret) {
- error_report("%s: Failed to set state SAVING", vbasedev->name);
- return ret;
- }
-
- qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE);
-
- ret = qemu_file_get_error(f);
- if (ret) {
- return ret;
- }
-
- return 0;
-}
-
static void vfio_save_cleanup(void *opaque)
{
VFIODevice *vbasedev = opaque;
@@ -658,14 +302,6 @@ static void vfio_save_cleanup(void *opaque)
trace_vfio_save_cleanup(vbasedev->name);
}
-static void vfio_v1_save_cleanup(void *opaque)
-{
- VFIODevice *vbasedev = opaque;
-
- vfio_migration_v1_cleanup(vbasedev);
- trace_vfio_save_cleanup(vbasedev->name);
-}
-
/*
* Migration size of VFIO devices can be as little as a few KBs or as big as
* many GBs. This value should be big enough to cover the worst case.
@@ -695,70 +331,6 @@ static void vfio_state_pending_exact(void *opaque, uint64_t *must_precopy,
stop_copy_size);
}
-static void vfio_v1_state_pending(void *opaque, uint64_t *must_precopy,
- uint64_t *can_postcopy)
-{
- VFIODevice *vbasedev = opaque;
- VFIOMigration *migration = vbasedev->migration;
- int ret;
-
- ret = vfio_update_pending(vbasedev);
- if (ret) {
- return;
- }
-
- *must_precopy += migration->pending_bytes;
-
- trace_vfio_v1_state_pending(vbasedev->name, *must_precopy, *can_postcopy);
-}
-
-static int vfio_save_iterate(QEMUFile *f, void *opaque)
-{
- VFIODevice *vbasedev = opaque;
- VFIOMigration *migration = vbasedev->migration;
- uint64_t data_size;
- int ret;
-
- qemu_put_be64(f, VFIO_MIG_FLAG_DEV_DATA_STATE);
-
- if (migration->pending_bytes == 0) {
- ret = vfio_update_pending(vbasedev);
- if (ret) {
- return ret;
- }
-
- if (migration->pending_bytes == 0) {
- qemu_put_be64(f, 0);
- qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE);
- /* indicates data finished, goto complete phase */
- return 1;
- }
- }
-
- ret = vfio_save_buffer(f, vbasedev, &data_size);
- if (ret) {
- error_report("%s: vfio_save_buffer failed %s", vbasedev->name,
- strerror(errno));
- return ret;
- }
-
- qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE);
-
- ret = qemu_file_get_error(f);
- if (ret) {
- return ret;
- }
-
- /*
- * Reset pending_bytes as state_pending* are not called during
- * savevm or snapshot case, in such case vfio_update_pending() at
- * the start of this function updates pending_bytes.
- */
- migration->pending_bytes = 0;
- trace_vfio_save_iterate(vbasedev->name, data_size);
- return 0;
-}
-
static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)
{
VFIODevice *vbasedev = opaque;
@@ -795,62 +367,6 @@ static int vfio_save_complete_precopy(QEMUFile *f, void *opaque)
return ret;
}
-static int vfio_v1_save_complete_precopy(QEMUFile *f, void *opaque)
-{
- VFIODevice *vbasedev = opaque;
- VFIOMigration *migration = vbasedev->migration;
- uint64_t data_size;
- int ret;
-
- ret = vfio_migration_v1_set_state(vbasedev, ~VFIO_DEVICE_STATE_V1_RUNNING,
- VFIO_DEVICE_STATE_V1_SAVING);
- if (ret) {
- error_report("%s: Failed to set state STOP and SAVING",
- vbasedev->name);
- return ret;
- }
-
- ret = vfio_update_pending(vbasedev);
- if (ret) {
- return ret;
- }
-
- while (migration->pending_bytes > 0) {
- qemu_put_be64(f, VFIO_MIG_FLAG_DEV_DATA_STATE);
- ret = vfio_save_buffer(f, vbasedev, &data_size);
- if (ret < 0) {
- error_report("%s: Failed to save buffer", vbasedev->name);
- return ret;
- }
-
- if (data_size == 0) {
- break;
- }
-
- ret = vfio_update_pending(vbasedev);
- if (ret) {
- return ret;
- }
- }
-
- qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE);
-
- ret = qemu_file_get_error(f);
- if (ret) {
- return ret;
- }
-
- ret = vfio_migration_v1_set_state(vbasedev, ~VFIO_DEVICE_STATE_V1_SAVING,
- 0);
- if (ret) {
- error_report("%s: Failed to set state STOPPED", vbasedev->name);
- return ret;
- }
-
- trace_vfio_v1_save_complete_precopy(vbasedev->name);
- return ret;
-}
-
static void vfio_save_state(QEMUFile *f, void *opaque)
{
VFIODevice *vbasedev = opaque;
@@ -872,33 +388,6 @@ static int vfio_load_setup(QEMUFile *f, void *opaque)
vbasedev->migration->device_state);
}
-static int vfio_v1_load_setup(QEMUFile *f, void *opaque)
-{
- VFIODevice *vbasedev = opaque;
- VFIOMigration *migration = vbasedev->migration;
- int ret = 0;
-
- if (migration->region.mmaps) {
- ret = vfio_region_mmap(&migration->region);
- if (ret) {
- error_report("%s: Failed to mmap VFIO migration region %d: %s",
- vbasedev->name, migration->region.nr,
- strerror(-ret));
- error_report("%s: Falling back to slow path", vbasedev->name);
- }
- }
-
- ret = vfio_migration_v1_set_state(vbasedev, ~VFIO_DEVICE_STATE_MASK,
- VFIO_DEVICE_STATE_V1_RESUMING);
- if (ret) {
- error_report("%s: Failed to set state RESUMING", vbasedev->name);
- if (migration->region.mmaps) {
- vfio_region_unmap(&migration->region);
- }
- }
- return ret;
-}
-
static int vfio_load_cleanup(void *opaque)
{
VFIODevice *vbasedev = opaque;
@@ -909,15 +398,6 @@ static int vfio_load_cleanup(void *opaque)
return 0;
}
-static int vfio_v1_load_cleanup(void *opaque)
-{
- VFIODevice *vbasedev = opaque;
-
- vfio_migration_v1_cleanup(vbasedev);
- trace_vfio_load_cleanup(vbasedev->name);
- return 0;
-}
-
static int vfio_load_state(QEMUFile *f, void *opaque, int version_id)
{
VFIODevice *vbasedev = opaque;
@@ -951,11 +431,7 @@ static int vfio_load_state(QEMUFile *f, void *opaque, int version_id)
uint64_t data_size = qemu_get_be64(f);
if (data_size) {
- if (vbasedev->migration->v2) {
- ret = vfio_load_buffer(f, vbasedev, data_size);
- } else {
- ret = vfio_v1_load_buffer(f, vbasedev, data_size);
- }
+ ret = vfio_load_buffer(f, vbasedev, data_size);
if (ret < 0) {
return ret;
}
@@ -987,19 +463,6 @@ static const SaveVMHandlers savevm_vfio_handlers = {
.load_state = vfio_load_state,
};
-static SaveVMHandlers savevm_vfio_v1_handlers = {
- .save_setup = vfio_v1_save_setup,
- .save_cleanup = vfio_v1_save_cleanup,
- .state_pending_exact = vfio_v1_state_pending,
- .state_pending_estimate = vfio_v1_state_pending,
- .save_live_iterate = vfio_save_iterate,
- .save_live_complete_precopy = vfio_v1_save_complete_precopy,
- .save_state = vfio_save_state,
- .load_setup = vfio_v1_load_setup,
- .load_cleanup = vfio_v1_load_cleanup,
- .load_state = vfio_load_state,
-};
-
/* ---------------------------------------------------------------------- */
static void vfio_vmstate_change(void *opaque, bool running, RunState state)
@@ -1034,70 +497,12 @@ static void vfio_vmstate_change(void *opaque, bool running, RunState state)
mig_state_to_str(new_state));
}
-static void vfio_v1_vmstate_change(void *opaque, bool running, RunState state)
-{
- VFIODevice *vbasedev = opaque;
- VFIOMigration *migration = vbasedev->migration;
- uint32_t value, mask;
- int ret;
-
- if (vbasedev->migration->vm_running == running) {
- return;
- }
-
- if (running) {
- /*
- * Here device state can have one of _SAVING, _RESUMING or _STOP bit.
- * Transition from _SAVING to _RUNNING can happen if there is migration
- * failure, in that case clear _SAVING bit.
- * Transition from _RESUMING to _RUNNING occurs during resuming
- * phase, in that case clear _RESUMING bit.
- * In both the above cases, set _RUNNING bit.
- */
- mask = ~VFIO_DEVICE_STATE_MASK;
- value = VFIO_DEVICE_STATE_V1_RUNNING;
- } else {
- /*
- * Here device state could be either _RUNNING or _SAVING|_RUNNING. Reset
- * _RUNNING bit
- */
- mask = ~VFIO_DEVICE_STATE_V1_RUNNING;
-
- /*
- * When VM state transition to stop for savevm command, device should
- * start saving data.
- */
- if (state == RUN_STATE_SAVE_VM) {
- value = VFIO_DEVICE_STATE_V1_SAVING;
- } else {
- value = 0;
- }
- }
-
- ret = vfio_migration_v1_set_state(vbasedev, mask, value);
- if (ret) {
- /*
- * Migration should be aborted in this case, but vm_state_notify()
- * currently does not support reporting failures.
- */
- error_report("%s: Failed to set device state 0x%x", vbasedev->name,
- (migration->device_state_v1 & mask) | value);
- if (migrate_get_current()->to_dst_file) {
- qemu_file_set_error(migrate_get_current()->to_dst_file, ret);
- }
- }
- vbasedev->migration->vm_running = running;
- trace_vfio_v1_vmstate_change(vbasedev->name, running, RunState_str(state),
- (migration->device_state_v1 & mask) | value);
-}
-
static void vfio_migration_state_notifier(Notifier *notifier, void *data)
{
MigrationState *s = data;
VFIOMigration *migration = container_of(notifier, VFIOMigration,
migration_state);
VFIODevice *vbasedev = migration->vbasedev;
- int ret;
trace_vfio_migration_state_notifier(vbasedev->name,
MigrationStatus_str(s->state));
@@ -1107,33 +512,17 @@ static void vfio_migration_state_notifier(Notifier *notifier, void *data)
case MIGRATION_STATUS_CANCELLED:
case MIGRATION_STATUS_FAILED:
bytes_transferred = 0;
- if (migration->v2) {
- /*
- * If setting the device in RUNNING state fails, the device should
- * be reset. To do so, use ERROR state as a recover state.
- */
- vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RUNNING,
- VFIO_DEVICE_STATE_ERROR);
- } else {
- ret = vfio_migration_v1_set_state(vbasedev,
- ~(VFIO_DEVICE_STATE_V1_SAVING |
- VFIO_DEVICE_STATE_V1_RESUMING),
- VFIO_DEVICE_STATE_V1_RUNNING);
- if (ret) {
- error_report("%s: Failed to set state RUNNING", vbasedev->name);
- }
- }
+ /*
+ * If setting the device in RUNNING state fails, the device should
+ * be reset. To do so, use ERROR state as a recover state.
+ */
+ vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RUNNING,
+ VFIO_DEVICE_STATE_ERROR);
}
}
static void vfio_migration_exit(VFIODevice *vbasedev)
{
- VFIOMigration *migration = vbasedev->migration;
-
- if (!migration->v2) {
- vfio_region_exit(&migration->region);
- vfio_region_finalize(&migration->region);
- }
g_free(vbasedev->migration);
vbasedev->migration = NULL;
}
@@ -1173,7 +562,6 @@ static int vfio_migration_init(VFIODevice *vbasedev)
VFIOMigration *migration;
char id[256] = "";
g_autofree char *path = NULL, *oid = NULL;
- struct vfio_region_info *info;
uint64_t mig_flags = 0;
if (!vbasedev->ops->vfio_get_object) {
@@ -1186,52 +574,20 @@ static int vfio_migration_init(VFIODevice *vbasedev)
}
ret = vfio_migration_query_flags(vbasedev, &mig_flags);
- if (!ret) {
- /* Migration v2 */
- /* Basic migration functionality must be supported */
- if (!(mig_flags & VFIO_MIGRATION_STOP_COPY)) {
- return -EOPNOTSUPP;
- }
- vbasedev->migration = g_new0(VFIOMigration, 1);
- vbasedev->migration->device_state = VFIO_DEVICE_STATE_RUNNING;
- vbasedev->migration->data_fd = -1;
- vbasedev->migration->v2 = true;
- } else if (ret == -ENOTTY) {
- /* Migration v1 */
- ret = vfio_get_dev_region_info(vbasedev,
- VFIO_REGION_TYPE_MIGRATION_DEPRECATED,
- VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED,
- &info);
- if (ret) {
- return ret;
- }
-
- vbasedev->migration = g_new0(VFIOMigration, 1);
- vbasedev->migration->device_state_v1 = VFIO_DEVICE_STATE_V1_RUNNING;
- vbasedev->migration->vm_running = runstate_is_running();
-
- ret = vfio_region_setup(obj, vbasedev, &vbasedev->migration->region,
- info->index, "migration");
- if (ret) {
- error_report("%s: Failed to setup VFIO migration region %d: %s",
- vbasedev->name, info->index, strerror(-ret));
- goto err;
- }
-
- if (!vbasedev->migration->region.size) {
- error_report("%s: Invalid zero-sized VFIO migration region %d",
- vbasedev->name, info->index);
- ret = -EINVAL;
- goto err;
- }
-
- g_free(info);
- } else {
+ if (ret) {
return ret;
}
+ /* Basic migration functionality must be supported */
+ if (!(mig_flags & VFIO_MIGRATION_STOP_COPY)) {
+ return -EOPNOTSUPP;
+ }
+
+ vbasedev->migration = g_new0(VFIOMigration, 1);
migration = vbasedev->migration;
migration->vbasedev = vbasedev;
+ migration->device_state = VFIO_DEVICE_STATE_RUNNING;
+ migration->data_fd = -1;
oid = vmstate_if_get_id(VMSTATE_IF(DEVICE(obj)));
if (oid) {
@@ -1241,28 +597,16 @@ static int vfio_migration_init(VFIODevice *vbasedev)
}
strpadcpy(id, sizeof(id), path, '\0');
- if (migration->v2) {
- register_savevm_live(id, VMSTATE_INSTANCE_ID_ANY, 1,
- &savevm_vfio_handlers, vbasedev);
-
- migration->vm_state = qdev_add_vm_change_state_handler(
- vbasedev->dev, vfio_vmstate_change, vbasedev);
- } else {
- register_savevm_live(id, VMSTATE_INSTANCE_ID_ANY, 1,
- &savevm_vfio_v1_handlers, vbasedev);
-
- migration->vm_state = qdev_add_vm_change_state_handler(
- vbasedev->dev, vfio_v1_vmstate_change, vbasedev);
- }
+ register_savevm_live(id, VMSTATE_INSTANCE_ID_ANY, 1, &savevm_vfio_handlers,
+ vbasedev);
+ migration->vm_state = qdev_add_vm_change_state_handler(vbasedev->dev,
+ vfio_vmstate_change,
+ vbasedev);
migration->migration_state.notify = vfio_migration_state_notifier;
add_migration_state_change_notifier(&migration->migration_state);
- return 0;
-err:
- g_free(info);
- vfio_migration_exit(vbasedev);
- return ret;
+ return 0;
}
/* ---------------------------------------------------------------------- */
@@ -150,24 +150,15 @@ vfio_display_edid_write_error(void) ""
# migration.c
vfio_migration_probe(const char *name) " (%s)"
vfio_migration_set_state(const char *name, const char *state) " (%s) state %s"
-vfio_migration_v1_set_state(const char *name, uint32_t state) " (%s) state %d"
vfio_vmstate_change(const char *name, int running, const char *reason, const char *dev_state) " (%s) running %d reason %s device state %s"
-vfio_v1_vmstate_change(const char *name, int running, const char *reason, uint32_t dev_state) " (%s) running %d reason %s device state %d"
vfio_migration_state_notifier(const char *name, const char *state) " (%s) state %s"
vfio_save_setup(const char *name, uint64_t data_buffer_size) " (%s) data buffer size 0x%"PRIx64
-vfio_v1_save_setup(const char *name) " (%s)"
vfio_save_cleanup(const char *name) " (%s)"
-vfio_save_buffer(const char *name, uint64_t data_offset, uint64_t data_size, uint64_t pending) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64" pending 0x%"PRIx64
-vfio_update_pending(const char *name, uint64_t pending) " (%s) pending 0x%"PRIx64
vfio_save_device_config_state(const char *name) " (%s)"
vfio_state_pending_exact(const char *name, uint64_t precopy, uint64_t postcopy, uint64_t stopcopy_size) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64" stopcopy size 0x%"PRIx64
-vfio_v1_state_pending(const char *name, uint64_t precopy, uint64_t postcopy) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64
-vfio_save_iterate(const char *name, int data_size) " (%s) data_size %d"
vfio_save_complete_precopy(const char *name, int ret) " (%s) ret %d"
-vfio_v1_save_complete_precopy(const char *name) " (%s)"
vfio_load_device_config_state(const char *name) " (%s)"
vfio_load_state(const char *name, uint64_t data) " (%s) data 0x%"PRIx64
-vfio_v1_load_state_device_data(const char *name, uint64_t data_offset, uint64_t data_size) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64
vfio_load_state_device_data(const char *name, uint64_t data_size, int ret) " (%s) size 0x%"PRIx64" ret %d"
vfio_load_cleanup(const char *name) " (%s)"
vfio_get_dirty_bitmap(int fd, uint64_t iova, uint64_t size, uint64_t bitmap_size, uint64_t start) "container fd=%d, iova=0x%"PRIx64" size= 0x%"PRIx64" bitmap_size=0x%"PRIx64" start=0x%"PRIx64
@@ -61,16 +61,11 @@ typedef struct VFIORegion {
typedef struct VFIOMigration {
struct VFIODevice *vbasedev;
VMChangeStateEntry *vm_state;
- VFIORegion region;
- uint32_t device_state_v1;
- int vm_running;
Notifier migration_state;
- uint64_t pending_bytes;
uint32_t device_state;
int data_fd;
void *data_buffer;
size_t data_buffer_size;
- bool v2;
} VFIOMigration;
typedef struct VFIOAddressSpace {