@@ -184,12 +184,17 @@ static bool vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
return true;
}
+ if (vdev->vbasedev.reused) {
+ goto skip_state;
+ }
+
/* Get to a known interrupt state */
qemu_set_fd_handler(irq_fd, NULL, NULL, vdev);
vfio_mask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
vdev->intx.pending = false;
pci_irq_deassert(&vdev->pdev);
+skip_state:
/* Get an eventfd for resample/unmask */
if (vfio_notifier_init(vdev, &vdev->intx.unmask, "intx-unmask", 0)) {
error_setg(errp, "vfio_notifier_init intx-unmask failed");
@@ -204,6 +209,10 @@ static bool vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
goto fail_irqfd;
}
+ if (vdev->vbasedev.reused) {
+ goto skip_irq;
+ }
+
if (!vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX, 0,
VFIO_IRQ_SET_ACTION_UNMASK,
event_notifier_get_fd(&vdev->intx.unmask),
@@ -214,6 +223,7 @@ static bool vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
/* Let'em rip */
vfio_unmask_single_irqindex(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
+skip_irq:
vdev->intx.kvm_accel = true;
trace_vfio_intx_enable_kvm(vdev->vbasedev.name);
@@ -329,7 +339,13 @@ static bool vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
return true;
}
- vfio_disable_interrupts(vdev);
+ /*
+ * Do not alter interrupt state during vfio_realize and cpr load. The
+ * reused flag is cleared thereafter.
+ */
+ if (!vdev->vbasedev.reused) {
+ vfio_disable_interrupts(vdev);
+ }
vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */
pci_config_set_interrupt_pin(vdev->pdev.config, pin);
@@ -351,7 +367,8 @@ static bool vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
fd = event_notifier_get_fd(&vdev->intx.interrupt);
qemu_set_fd_handler(fd, vfio_intx_interrupt, NULL, vdev);
- if (!vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX, 0,
+ if (!vdev->vbasedev.reused &&
+ !vfio_set_irq_signaling(&vdev->vbasedev, VFIO_PCI_INTX_IRQ_INDEX, 0,
VFIO_IRQ_SET_ACTION_TRIGGER, fd, errp)) {
qemu_set_fd_handler(fd, NULL, NULL, vdev);
vfio_notifier_cleanup(vdev, &vdev->intx.interrupt, "intx-interrupt", 0);
@@ -3262,7 +3279,8 @@ static void vfio_realize(PCIDevice *pdev, Error **errp)
vfio_intx_routing_notifier);
vdev->irqchip_change_notifier.notify = vfio_irqchip_change;
kvm_irqchip_add_change_notifier(&vdev->irqchip_change_notifier);
- if (!vfio_intx_enable(vdev, errp)) {
+ /* Wait until cpr load reads intx routing data to enable */
+ if (!vdev->vbasedev.reused && !vfio_intx_enable(vdev, errp)) {
goto out_deregister;
}
}
@@ -3578,12 +3596,36 @@ static int vfio_pci_post_load(void *opaque, int version_id)
vfio_claim_vectors(vdev, nr_vectors, false);
} else if (vfio_pci_read_config(pdev, PCI_INTERRUPT_PIN, 1)) {
- g_assert_not_reached(); /* completed in a subsequent patch */
+ Error *err = NULL;
+ if (!vfio_intx_enable(vdev, &err)) {
+ error_report_err(err);
+ return -1;
+ }
}
return 0;
}
+static const VMStateDescription vfio_intx_vmstate = {
+ .name = "vfio-intx",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(pending, VFIOINTx),
+ VMSTATE_UINT32(route.mode, VFIOINTx),
+ VMSTATE_INT32(route.irq, VFIOINTx),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+#define VMSTATE_VFIO_INTX(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(VFIOINTx), \
+ .vmsd = &vfio_intx_vmstate, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, VFIOINTx), \
+}
+
static const VMStateDescription vfio_pci_vmstate = {
.name = "vfio-pci",
.version_id = 0,
@@ -3595,6 +3637,7 @@ static const VMStateDescription vfio_pci_vmstate = {
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(pdev, VFIOPCIDevice),
VMSTATE_MSIX_TEST(pdev, VFIOPCIDevice, vfio_msix_present),
+ VMSTATE_VFIO_INTX(intx, VFIOPCIDevice),
VMSTATE_END_OF_LIST()
}
};
Preserve vfio INTX state across cpr-exec. Preserve VFIOINTx fields as follows: pin : Recover this from the vfio config in kernel space interrupt : Preserve its eventfd descriptor across exec. unmask : Ditto route.irq : This could perhaps be recovered in vfio_pci_post_load by calling pci_device_route_intx_to_irq(pin), whose implementation reads config space for a bridge device such as ich9. However, there is no guarantee that the bridge vmstate is read before vfio vmstate. Rather than fiddling with MigrationPriority for vmstate handlers, explicitly save route.irq in vfio vmstate. pending : save in vfio vmstate. mmap_timeout, mmap_timer : Re-initialize bool kvm_accel : Re-initialize In vfio_realize, defer calling vfio_intx_enable until the vmstate is available, in vfio_pci_post_load. Modify vfio_intx_enable and vfio_intx_kvm_enable to skip vfio initialization, but still perform kvm initialization. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> --- hw/vfio/pci.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 47 insertions(+), 4 deletions(-)