@@ -39,6 +39,13 @@
#define VFIO_SPAPR_TCE_v2_IOMMU 7
/*
+ * The No-IOMMU IOMMU offers no translation or isolation for devices and
+ * supports no ioctls outside of VFIO_CHECK_EXTENSION. Use of VFIO's No-IOMMU
+ * code will taint the host kernel and should be used with extreme caution.
+ */
+#define VFIO_NOIOMMU_IOMMU 8
+
+/*
* The IOCTL interface is designed for extensibility by embedding the
* structure length (argsz) and flags into structures passed between
* kernel and userspace. We therefore use the _IO() macro for these
@@ -52,6 +59,33 @@
#define VFIO_TYPE (';')
#define VFIO_BASE 100
+/*
+ * For extension of INFO ioctls, VFIO makes use of a capability chain
+ * designed after PCI/e capabilities. A flag bit indicates whether
+ * this capability chain is supported and a field defined in the fixed
+ * structure defines the offset of the first capability in the chain.
+ * This field is only valid when the corresponding bit in the flags
+ * bitmap is set. This offset field is relative to the start of the
+ * INFO buffer, as is the next field within each capability header.
+ * The id within the header is a shared address space per INFO ioctl,
+ * while the version field is specific to the capability id. The
+ * contents following the header are specific to the capability id.
+ */
+struct vfio_info_cap_header {
+ __u16 id; /* Identifies capability */
+ __u16 version; /* Version specific to the capability ID */
+ __u32 next; /* Offset of next capability */
+};
+
+/*
+ * Callers of INFO ioctls passing insufficiently sized buffers will see
+ * the capability chain flag bit set, a zero value for the first capability
+ * offset (if available within the provided argsz), and argsz will be
+ * updated to report the necessary buffer size. For compatibility, the
+ * INFO ioctl will not report error in this case, but the capability chain
+ * will not be available.
+ */
+
/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
/**
@@ -187,13 +221,70 @@ struct vfio_region_info {
#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */
#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */
#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */
+#define VFIO_REGION_INFO_FLAG_CAPS (1 << 3) /* Info supports caps */
__u32 index; /* Region index */
- __u32 resv; /* Reserved for alignment */
+ __u32 cap_offset; /* Offset within info struct of first cap */
__u64 size; /* Region size (bytes) */
__u64 offset; /* Region offset from start of device fd */
};
#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8)
+/*
+ * The sparse mmap capability allows finer granularity of specifying areas
+ * within a region with mmap support. When specified, the user should only
+ * mmap the offset ranges specified by the areas array. mmaps outside of the
+ * areas specified may fail (such as the range covering a PCI MSI-X table) or
+ * may result in improper device behavior.
+ *
+ * The structures below define version 1 of this capability.
+ */
+#define VFIO_REGION_INFO_CAP_SPARSE_MMAP 1
+
+struct vfio_region_sparse_mmap_area {
+ __u64 offset; /* Offset of mmap'able area within region */
+ __u64 size; /* Size of mmap'able area */
+};
+
+struct vfio_region_info_cap_sparse_mmap {
+ struct vfio_info_cap_header header;
+ __u32 nr_areas;
+ __u32 reserved;
+ struct vfio_region_sparse_mmap_area areas[];
+};
+
+/*
+ * The device specific type capability allows regions unique to a specific
+ * device or class of devices to be exposed. This helps solve the problem for
+ * vfio bus drivers of defining which region indexes correspond to which region
+ * on the device, without needing to resort to static indexes, as done by
+ * vfio-pci. For instance, if we were to go back in time, we might remove
+ * VFIO_PCI_VGA_REGION_INDEX and let vfio-pci simply define that all indexes
+ * greater than or equal to VFIO_PCI_NUM_REGIONS are device specific and we'd
+ * make a "VGA" device specific type to describe the VGA access space. This
+ * means that non-VGA devices wouldn't need to waste this index, and thus the
+ * address space associated with it due to implementation of device file
+ * descriptor offsets in vfio-pci.
+ *
+ * The current implementation is now part of the user ABI, so we can't use this
+ * for VGA, but there are other upcoming use cases, such as opregions for Intel
+ * IGD devices and framebuffers for vGPU devices. We missed VGA, but we'll
+ * use this for future additions.
+ *
+ * The structure below defines version 1 of this capability.
+ */
+#define VFIO_REGION_INFO_CAP_TYPE 2
+
+struct vfio_region_info_cap_type {
+ struct vfio_info_cap_header header;
+ __u32 type; /* global per bus driver */
+ __u32 subtype; /* type specific */
+};
+
+#define VFIO_REGION_TYPE_PCI_VENDOR_TYPE (1 << 31)
+#define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff)
+
+#define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION (1)
+
/**
* VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
* struct vfio_irq_info)
@@ -329,7 +420,8 @@ enum {
* between described ranges are unimplemented.
*/
VFIO_PCI_VGA_REGION_INDEX,
- VFIO_PCI_NUM_REGIONS
+ VFIO_PCI_NUM_REGIONS = 9 /* Fixed user ABI, region indexes >=9 use */
+ /* device specific cap to define content. */
};
enum {
@@ -568,8 +660,10 @@ struct vfio_iommu_spapr_tce_create {
__u32 flags;
/* in */
__u32 page_shift;
+ __u32 __resv1;
__u64 window_size;
__u32 levels;
+ __u32 __resv2;
/* out */
__u64 start_addr;
};
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- linux-headers/linux/vfio.h | 98 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 96 insertions(+), 2 deletions(-)