| Message ID | 20161021123707.18302-3-olaf@aepfle.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 21 Oct 2016, Olaf Hering wrote: > Implement SUSE specific unplug protocol for emulated PCI devices > in PVonHVM guests. Its a simple 'outl(1, (ioaddr + 4));'. > This protocol was implemented and used since Xen 3.0.4. > It is used in all SUSE/SLES/openSUSE releases up to SLES11SP3 and > openSUSE 12.3. > In addition old (pre-2011) VMDP versions are handled as well. > > Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> > hw/i386/xen/xen_platform.c | 27 ++++++++++++++++++++++++++- > 1 file changed, 26 insertions(+), 1 deletion(-) > > diff --git a/hw/i386/xen/xen_platform.c b/hw/i386/xen/xen_platform.c > index 91d8a7a..2e1e543 100644 > --- a/hw/i386/xen/xen_platform.c > +++ b/hw/i386/xen/xen_platform.c > @@ -311,13 +311,38 @@ static void xen_platform_ioport_writeb(void *opaque, hwaddr addr, > uint64_t val, unsigned int size) > { > PCIXenPlatformState *s = opaque; > + PCIDevice *pci_dev = PCI_DEVICE(s); > > switch (addr) { > case 0: /* Platform flags */ > platform_fixed_ioport_writeb(opaque, 0, (uint32_t)val); > break; > + case 4: > + if (val == 1) { > + /* > + * SUSE unplug for Xenlinux > + * xen-kmp used this since xen-3.0.4, instead the official protocol > + * from xen-3.3+ It did an unconditional "outl(1, (ioaddr + 4));" > + * Pre VMDP 1.7 used 4 and 8 depending on how VMDP was configured. > + * If VMDP was to control both disk and LAN it would use 4. > + * If it controlled just disk or just LAN, it would use 8 below. > + */ > + pci_unplug_disks(pci_dev->bus); > + pci_unplug_nics(pci_dev->bus); > + } > + break; > case 8: > - log_writeb(s, (uint32_t)val); > + switch (val) { > + case 1: > + pci_unplug_disks(pci_dev->bus); > + break; > + case 2: > + pci_unplug_nics(pci_dev->bus); > + break; > + default: > + log_writeb(s, (uint32_t)val); > + break; > + } > break; > default: > break; >
diff --git a/hw/i386/xen/xen_platform.c b/hw/i386/xen/xen_platform.c index 91d8a7a..2e1e543 100644 --- a/hw/i386/xen/xen_platform.c +++ b/hw/i386/xen/xen_platform.c @@ -311,13 +311,38 @@ static void xen_platform_ioport_writeb(void *opaque, hwaddr addr, uint64_t val, unsigned int size) { PCIXenPlatformState *s = opaque; + PCIDevice *pci_dev = PCI_DEVICE(s); switch (addr) { case 0: /* Platform flags */ platform_fixed_ioport_writeb(opaque, 0, (uint32_t)val); break; + case 4: + if (val == 1) { + /* + * SUSE unplug for Xenlinux + * xen-kmp used this since xen-3.0.4, instead the official protocol + * from xen-3.3+ It did an unconditional "outl(1, (ioaddr + 4));" + * Pre VMDP 1.7 used 4 and 8 depending on how VMDP was configured. + * If VMDP was to control both disk and LAN it would use 4. + * If it controlled just disk or just LAN, it would use 8 below. + */ + pci_unplug_disks(pci_dev->bus); + pci_unplug_nics(pci_dev->bus); + } + break; case 8: - log_writeb(s, (uint32_t)val); + switch (val) { + case 1: + pci_unplug_disks(pci_dev->bus); + break; + case 2: + pci_unplug_nics(pci_dev->bus); + break; + default: + log_writeb(s, (uint32_t)val); + break; + } break; default: break;
Implement SUSE specific unplug protocol for emulated PCI devices in PVonHVM guests. Its a simple 'outl(1, (ioaddr + 4));'. This protocol was implemented and used since Xen 3.0.4. It is used in all SUSE/SLES/openSUSE releases up to SLES11SP3 and openSUSE 12.3. In addition old (pre-2011) VMDP versions are handled as well. Signed-off-by: Olaf Hering <olaf@aepfle.de> --- hw/i386/xen/xen_platform.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)