@@ -3,17 +3,14 @@ QA output created by 059
=== Testing invalid granularity ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.vmdk: Invalid granularity, image may be corrupt
-no file open, try 'help open'
=== Testing too big L2 table size ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.vmdk: L2 table size too big
-no file open, try 'help open'
=== Testing too big L1 table size ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.vmdk: L1 size too big
-no file open, try 'help open'
=== Testing monolithicFlat creation and opening ===
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2147483648 subformat=monolithicFlat
@@ -4,7 +4,6 @@ QA output created by 070
can't open device TEST_DIR/iotest-dirtylog-10G-4M.vhdx: VHDX image file 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx' opened read-only, but contains a log that needs to be replayed
To replay the log, run:
qemu-img check -r all 'TEST_DIR/iotest-dirtylog-10G-4M.vhdx'
- no file open, try 'help open'
=== Verify open image replays log ===
read 18874368/18874368 bytes at offset 0
18 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -10,29 +10,22 @@ read 512/512 bytes at offset 1048064
== block_size must be a multiple of 512 ==
can't open device TEST_DIR/simple-pattern.cloop: block_size 513 must be a multiple of 512
-no file open, try 'help open'
== block_size cannot be zero ==
can't open device TEST_DIR/simple-pattern.cloop: block_size cannot be zero
-no file open, try 'help open'
== huge block_size ===
can't open device TEST_DIR/simple-pattern.cloop: block_size 4294966784 must be 64 MB or less
-no file open, try 'help open'
== offsets_size overflow ===
can't open device TEST_DIR/simple-pattern.cloop: n_blocks 4294967295 must be 536870911 or less
-no file open, try 'help open'
== refuse images that require too many offsets ===
can't open device TEST_DIR/simple-pattern.cloop: image requires too many offsets, try increasing block size
-no file open, try 'help open'
== refuse images with non-monotonically increasing offsets ==
can't open device TEST_DIR/simple-pattern.cloop: offsets not monotonically increasing at index 1, image file is corrupt
-no file open, try 'help open'
== refuse images with invalid compressed block size ==
can't open device TEST_DIR/simple-pattern.cloop: invalid compressed block size at index 1, image file is corrupt
-no file open, try 'help open'
*** done
@@ -6,15 +6,12 @@ read 65536/65536 bytes at offset 0
== Negative catalog size ==
can't open device TEST_DIR/parallels-v1: Catalog too large
-no file open, try 'help open'
== Overflow in catalog allocation ==
can't open device TEST_DIR/parallels-v1: Catalog too large
-no file open, try 'help open'
== Zero sectors per track ==
can't open device TEST_DIR/parallels-v1: Invalid image: Zero sectors per track
-no file open, try 'help open'
== Read from a valid v2 image ==
read 65536/65536 bytes at offset 0
@@ -6,23 +6,17 @@ read 512/512 bytes at offset 0
== Negative catalog size ==
can't open device TEST_DIR/empty.bochs: Catalog size is too large
-no file open, try 'help open'
== Overflow for catalog size * sizeof(uint32_t) ==
can't open device TEST_DIR/empty.bochs: Catalog size is too large
-no file open, try 'help open'
== Too small catalog bitmap for image size ==
can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
-no file open, try 'help open'
can't open device TEST_DIR/empty.bochs: Catalog size is too small for this disk size
-no file open, try 'help open'
== Negative extent size ==
can't open device TEST_DIR/empty.bochs: Extent size 2147483648 is too large
-no file open, try 'help open'
== Zero extent size ==
can't open device TEST_DIR/empty.bochs: Extent size must be at least 512
-no file open, try 'help open'
*** done
@@ -3,46 +3,33 @@ QA output created by 080
== Huge header size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: qcow2 header exceeds cluster size
-no file open, try 'help open'
== Huge unknown header extension ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: Invalid backing file offset
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Header extension too large
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Header extension too large
-no file open, try 'help open'
== Huge refcount table size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: Reference count table too large
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Reference count table too large
-no file open, try 'help open'
== Misaligned refcount table ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: Invalid reference count table offset
-no file open, try 'help open'
== Huge refcount offset ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: Invalid reference count table offset
-no file open, try 'help open'
== Invalid snapshot table ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: Too many snapshots
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Too many snapshots
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Invalid snapshot table offset
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Invalid snapshot table offset
-no file open, try 'help open'
== Hitting snapshot table size limit ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
@@ -53,13 +40,9 @@ read 512/512 bytes at offset 0
== Invalid L1 table ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: Active L1 table too large
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Active L1 table too large
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Invalid L1 table offset
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow2: Invalid L1 table offset
-no file open, try 'help open'
== Invalid L1 table (with internal snapshot in the image) ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
@@ -68,7 +51,6 @@ qemu-img: Could not open 'TEST_DIR/t.IMGFMT': L1 table is too small
== Invalid backing file size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow2: Backing file name too long
-no file open, try 'help open'
== Invalid L2 entry (huge physical offset) ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
@@ -2,52 +2,42 @@ QA output created by 083
=== Check disconnect before neg1 ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect after neg1 ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect 8 neg1 ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect 16 neg1 ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect before export ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect after export ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect 4 export ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect 12 export ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect 16 export ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect before neg2 ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect after neg2 ===
@@ -56,12 +46,10 @@ read failed: Input/output error
=== Check disconnect 8 neg2 ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect 10 neg2 ===
can't open device nbd:127.0.0.1:PORT:exportname=foo
-no file open, try 'help open'
=== Check disconnect before request ===
@@ -99,27 +87,22 @@ read 512/512 bytes at offset 0
=== Check disconnect before neg-classic ===
can't open device nbd:127.0.0.1:PORT
-no file open, try 'help open'
=== Check disconnect 8 neg-classic ===
can't open device nbd:127.0.0.1:PORT
-no file open, try 'help open'
=== Check disconnect 16 neg-classic ===
can't open device nbd:127.0.0.1:PORT
-no file open, try 'help open'
=== Check disconnect 24 neg-classic ===
can't open device nbd:127.0.0.1:PORT
-no file open, try 'help open'
=== Check disconnect 28 neg-classic ===
can't open device nbd:127.0.0.1:PORT
-no file open, try 'help open'
=== Check disconnect after neg-classic ===
@@ -3,15 +3,9 @@ QA output created by 088
== Invalid block size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.vpc: Invalid block size 0
-no file open, try 'help open'
can't open device TEST_DIR/t.vpc: Invalid block size 0
-no file open, try 'help open'
can't open device TEST_DIR/t.vpc: Invalid block size 128
-no file open, try 'help open'
can't open device TEST_DIR/t.vpc: Invalid block size 128
-no file open, try 'help open'
can't open device TEST_DIR/t.vpc: Invalid block size 305419896
-no file open, try 'help open'
can't open device TEST_DIR/t.vpc: Invalid block size 305419896
-no file open, try 'help open'
*** done
@@ -3,36 +3,24 @@ QA output created by 092
== Invalid cluster size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: Cluster size must be between 512 and 64k
-no file open, try 'help open'
== Invalid L2 table size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: L2 table size must be between 512 and 64k
-no file open, try 'help open'
== Invalid size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow: Image too large
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: Image too large
-no file open, try 'help open'
== Invalid backing file length ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
can't open device TEST_DIR/t.qcow: Backing file name too long
-no file open, try 'help open'
can't open device TEST_DIR/t.qcow: Backing file name too long
-no file open, try 'help open'
*** done
@@ -3,35 +3,28 @@ QA output created by 116
== truncated header cluster ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
-no file open, try 'help open'
== invalid header magic ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
can't open device TEST_DIR/t.qed: Image not in QED format
-no file open, try 'help open'
== invalid cluster size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
-no file open, try 'help open'
== invalid table size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
-no file open, try 'help open'
== invalid header size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
-no file open, try 'help open'
== invalid L1 table offset ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
-no file open, try 'help open'
== invalid image size ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
can't open device TEST_DIR/t.qed: Could not open 'TEST_DIR/t.qed': Invalid argument
-no file open, try 'help open'
*** done
@@ -23,7 +23,6 @@ read 32768/32768 bytes at offset 0
32 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
== Corrupt image ==
can't open device TEST_DIR/t.parallels: parallels: Image was not closed correctly; cannot be opened read/write
-no file open, try 'help open'
ERROR image was not closed correctly
1 errors were found on the image.
@@ -9,7 +9,6 @@ read 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
{"return": {}}
can't open device nbd+unix:///drv?socket=TEST_DIR/nbd: No export with name 'drv' available
-no file open, try 'help open'
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "SHUTDOWN"}
*** done