Message ID | 20170829090622.30843-1-kchamart@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, Aug 29, 2017 at 11:06:22AM +0200, Kashyap Chamarthy wrote: > This is the follow-up patch that was discussed[*] as part of feedback to > qemu-iotest 194. > > Changes in this patch: > > - Supply 'job-id' parameter to `drive-mirror` invocation. > > - Issue QMP `block-job-cancel` command on the source QEMU to > gracefully complete `drive-mirror` operation. > > - Stop the NBD server on the destination QEMU. > > - Finally, check for both the events: MIGRATION and > BLOCK_JOB_COMPLETED > > With the above, the test will also be (almost) in sync with the > procedure outlined in the document 'live-block-operations.rst'[+] > (section: "QMP invocation for live storage migration with > ``drive-mirror`` + NBD"). > > [*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html > -- qemu-iotests: add 194 non-shared storage migration test > [+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst > > Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> > --- > Changes in v2: > - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED (Eric) > --- > tests/qemu-iotests/194 | 25 +++++++++++++++++++------ > tests/qemu-iotests/194.out | 11 ++++++++--- > 2 files changed, 27 insertions(+), 9 deletions(-) > > diff --git a/tests/qemu-iotests/194 b/tests/qemu-iotests/194 > index 8028111e21bed5cf4a2e8e32dc04aa5a9ea9caca..9d81189fe3e790d060da5a0fd41836f4b57f95c7 100755 > --- a/tests/qemu-iotests/194 > +++ b/tests/qemu-iotests/194 > @@ -46,16 +46,17 @@ iotests.log('Launching NBD server on destination...') > iotests.log(dest_vm.qmp('nbd-server-start', addr={'type': 'unix', 'data': {'path': nbd_sock_path}})) > iotests.log(dest_vm.qmp('nbd-server-add', device='drive0', writable=True)) > > -iotests.log('Starting drive-mirror on source...') > +iotests.log('Starting `drive-mirror` on source...') > iotests.log(source_vm.qmp( > 'drive-mirror', > device='drive0', > target='nbd+unix:///drive0?socket={0}'.format(nbd_sock_path), > sync='full', > format='raw', # always raw, the server handles the format > - mode='existing')) > + mode='existing', > + job_id='mirror-job0')) > > -iotests.log('Waiting for drive-mirror to complete...') > +iotests.log('Waiting for `drive-mirror` to complete...') > iotests.log(source_vm.event_wait('BLOCK_JOB_READY'), > filters=[iotests.filter_qmp_event]) > > @@ -66,8 +67,20 @@ dest_vm.qmp('migrate-set-capabilities', > capabilities=[{'capability': 'events', 'state': True}]) > iotests.log(source_vm.qmp('migrate', uri='unix:{0}'.format(migration_sock_path))) > > +iotests.log('Gracefully ending the `drive-mirror` job on source...') > +iotests.log(source_vm.qmp('block-job-cancel', device='mirror-job0')) Two issues: 1. Migration may not have completed yet so drive-mirror cannot be stopped here. We need to wait for migration to complete on the source before cancelling the block job. 2. block-job-cancel is asynchronous. The block job may still be running after this returns. Therefore it may still be using the NBD drive... > + > +iotests.log('Stopping the NBD server on destination...') > +iotests.log(dest_vm.qmp('nbd-server-stop')) ...and that races with this command on the destination. We need to wait for the BLOCK_JOB_CANCELLED/COMPLETED event on the source QEMU before stopping the NBD server on the destination. > + > while True: > - event = source_vm.event_wait('MIGRATION') > - iotests.log(event, filters=[iotests.filter_qmp_event]) > - if event['data']['status'] in ('completed', 'failed'): > + event1 = source_vm.event_wait('MIGRATION') > + iotests.log(event1, filters=[iotests.filter_qmp_event]) > + if event1['data']['status'] in ('completed', 'failed'): > + break > + > +while True: > + event2 = source_vm.event_wait('BLOCK_JOB_COMPLETED') > + iotests.log(event2, filters=[iotests.filter_qmp_event]) > + if event2['event'] == 'BLOCK_JOB_COMPLETED': > break > diff --git a/tests/qemu-iotests/194.out b/tests/qemu-iotests/194.out > index ae501fecacb706b1851cb9063ce9c9d5a28bb7ea..a461d7e21abb2dee54d72d93d644100f9fbcb17d 100644 > --- a/tests/qemu-iotests/194.out > +++ b/tests/qemu-iotests/194.out > @@ -2,12 +2,17 @@ Launching VMs... > Launching NBD server on destination... > {u'return': {}} > {u'return': {}} > -Starting drive-mirror on source... > +Starting `drive-mirror` on source... > {u'return': {}} > -Waiting for drive-mirror to complete... > -{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'drive0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_READY'} > +Waiting for `drive-mirror` to complete... > +{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'mirror-job0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_READY'} > Starting migration... > {u'return': {}} > +Gracefully ending the `drive-mirror` job on source... > +{u'return': {}} > +Stopping the NBD server on destination... > +{u'return': {}} > {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'setup'}, u'event': u'MIGRATION'} > {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'active'}, u'event': u'MIGRATION'} > {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'completed'}, u'event': u'MIGRATION'} > +{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'mirror-job0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_COMPLETED'} > -- > 2.9.5 > >
diff --git a/tests/qemu-iotests/194 b/tests/qemu-iotests/194 index 8028111e21bed5cf4a2e8e32dc04aa5a9ea9caca..9d81189fe3e790d060da5a0fd41836f4b57f95c7 100755 --- a/tests/qemu-iotests/194 +++ b/tests/qemu-iotests/194 @@ -46,16 +46,17 @@ iotests.log('Launching NBD server on destination...') iotests.log(dest_vm.qmp('nbd-server-start', addr={'type': 'unix', 'data': {'path': nbd_sock_path}})) iotests.log(dest_vm.qmp('nbd-server-add', device='drive0', writable=True)) -iotests.log('Starting drive-mirror on source...') +iotests.log('Starting `drive-mirror` on source...') iotests.log(source_vm.qmp( 'drive-mirror', device='drive0', target='nbd+unix:///drive0?socket={0}'.format(nbd_sock_path), sync='full', format='raw', # always raw, the server handles the format - mode='existing')) + mode='existing', + job_id='mirror-job0')) -iotests.log('Waiting for drive-mirror to complete...') +iotests.log('Waiting for `drive-mirror` to complete...') iotests.log(source_vm.event_wait('BLOCK_JOB_READY'), filters=[iotests.filter_qmp_event]) @@ -66,8 +67,20 @@ dest_vm.qmp('migrate-set-capabilities', capabilities=[{'capability': 'events', 'state': True}]) iotests.log(source_vm.qmp('migrate', uri='unix:{0}'.format(migration_sock_path))) +iotests.log('Gracefully ending the `drive-mirror` job on source...') +iotests.log(source_vm.qmp('block-job-cancel', device='mirror-job0')) + +iotests.log('Stopping the NBD server on destination...') +iotests.log(dest_vm.qmp('nbd-server-stop')) + while True: - event = source_vm.event_wait('MIGRATION') - iotests.log(event, filters=[iotests.filter_qmp_event]) - if event['data']['status'] in ('completed', 'failed'): + event1 = source_vm.event_wait('MIGRATION') + iotests.log(event1, filters=[iotests.filter_qmp_event]) + if event1['data']['status'] in ('completed', 'failed'): + break + +while True: + event2 = source_vm.event_wait('BLOCK_JOB_COMPLETED') + iotests.log(event2, filters=[iotests.filter_qmp_event]) + if event2['event'] == 'BLOCK_JOB_COMPLETED': break diff --git a/tests/qemu-iotests/194.out b/tests/qemu-iotests/194.out index ae501fecacb706b1851cb9063ce9c9d5a28bb7ea..a461d7e21abb2dee54d72d93d644100f9fbcb17d 100644 --- a/tests/qemu-iotests/194.out +++ b/tests/qemu-iotests/194.out @@ -2,12 +2,17 @@ Launching VMs... Launching NBD server on destination... {u'return': {}} {u'return': {}} -Starting drive-mirror on source... +Starting `drive-mirror` on source... {u'return': {}} -Waiting for drive-mirror to complete... -{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'drive0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_READY'} +Waiting for `drive-mirror` to complete... +{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'mirror-job0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_READY'} Starting migration... {u'return': {}} +Gracefully ending the `drive-mirror` job on source... +{u'return': {}} +Stopping the NBD server on destination... +{u'return': {}} {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'setup'}, u'event': u'MIGRATION'} {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'active'}, u'event': u'MIGRATION'} {u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'status': u'completed'}, u'event': u'MIGRATION'} +{u'timestamp': {u'seconds': 'SECS', u'microseconds': 'USECS'}, u'data': {u'device': u'mirror-job0', u'type': u'mirror', u'speed': 0, u'len': 1073741824, u'offset': 1073741824}, u'event': u'BLOCK_JOB_COMPLETED'}
This is the follow-up patch that was discussed[*] as part of feedback to qemu-iotest 194. Changes in this patch: - Supply 'job-id' parameter to `drive-mirror` invocation. - Issue QMP `block-job-cancel` command on the source QEMU to gracefully complete `drive-mirror` operation. - Stop the NBD server on the destination QEMU. - Finally, check for both the events: MIGRATION and BLOCK_JOB_COMPLETED With the above, the test will also be (almost) in sync with the procedure outlined in the document 'live-block-operations.rst'[+] (section: "QMP invocation for live storage migration with ``drive-mirror`` + NBD"). [*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html -- qemu-iotests: add 194 non-shared storage migration test [+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> --- Changes in v2: - Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED (Eric) --- tests/qemu-iotests/194 | 25 +++++++++++++++++++------ tests/qemu-iotests/194.out | 11 ++++++++--- 2 files changed, 27 insertions(+), 9 deletions(-)