| Message ID | 20180418030424.28980-6-famz@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Apr 18, 2018 at 11:04:22AM +0800, Fam Zheng wrote: > +static void iscsi_save_designator(IscsiLun *lun, > + struct scsi_inquiry_device_identification *inq_di) > +{ > + struct scsi_inquiry_device_designator *desig, *copy = NULL; > + > + for (desig = inq_di->designators; desig; desig = desig->next) { > + if (desig->association || > + desig->designator_type > SCSI_DESIGNATOR_TYPE_NAA) { > + continue; > + } > + /* NAA works better than T10 vendor ID based designator. */ > + if (!copy || copy->designator_type < desig->designator_type) { > + copy = desig; > + } > + } > + if (copy) { > + lun->dd = g_new(struct scsi_inquiry_device_designator, 1); > + *lun->dd = *copy; Just in case: lun->dd->next = NULL; > + lun->dd->designator = g_malloc(copy->designator_length); > + memcpy(lun->dd->designator, copy->designator, copy->designator_length); > + } > +} > + > static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, > Error **errp) > { > @@ -1922,6 +1946,7 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, > struct scsi_task *inq_task; > struct scsi_inquiry_logical_block_provisioning *inq_lbp; > struct scsi_inquiry_block_limits *inq_bl; > + struct scsi_inquiry_device_identification *inq_di; > switch (inq_vpd->pages[i]) { > case SCSI_INQUIRY_PAGECODE_LOGICAL_BLOCK_PROVISIONING: > inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1, > @@ -1947,6 +1972,17 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, > sizeof(struct scsi_inquiry_block_limits)); > scsi_free_scsi_task(inq_task); > break; > + case SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION: The device designator part should probably be a separate patch. > + inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1, > + SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION, > + (void **) &inq_di, errp); > + if (inq_task == NULL) { > + ret = -EINVAL; > + goto out; > + } > + iscsi_save_designator(iscsilun, inq_di); > + scsi_free_scsi_task(inq_task); > + break; > default: > break; > } > @@ -2003,6 +2039,8 @@ static void iscsi_close(BlockDriverState *bs) > iscsi_logout_sync(iscsi); > } > iscsi_destroy_context(iscsi); > + g_free(iscsilun->dd->designator); Can iscsilun->dd be NULL? > +static void iscsi_xcopy_data(struct iscsi_data *data, > + IscsiLun *src, int64_t src_lba, > + IscsiLun *dst, int64_t dst_lba, > + int num_blocks) It's not obvious that int is the appropriate type for num_blocks. The caller had a uint64_t value. Also, IscsiLun->num_blocks is uint64_t. > +{ > + uint8_t *buf; > + int offset; > + int tgt_desc_len, seg_desc_len; > + > + data->size = XCOPY_DESC_OFFSET + struct iscsi_data->size is size_t. Why does this function and the populate function use int for memory offsets/lengths? > + 32 * 2 + /* IDENT_DESCR_TGT_DESCR */ > + 28; /* BLK_TO_BLK_SEG_DESCR */ > + data->data = g_malloc0(data->size); > + buf = data->data; > + > + /* Initialise CSCD list with one src + one dst descriptor */ > + offset = XCOPY_DESC_OFFSET; > + offset += iscsi_populate_target_desc(buf + offset, src); > + offset += iscsi_populate_target_desc(buf + offset, dst); > + tgt_desc_len = offset - XCOPY_DESC_OFFSET; > + > + /* Initialise one segment descriptor */ > + seg_desc_len = iscsi_xcopy_populate_desc(buf + offset, 0, 0, > + 0, 1, num_blocks, > + src_lba, dst_lba); > + offset += seg_desc_len; > + > + /* Initialise the parameter list header */ > + iscsi_xcopy_populate_header(buf, 1, 0, 2 /* LIST_ID_USAGE_DISCARD */, > + 0, tgt_desc_len, seg_desc_len, 0); offset, tgt_desc_len, and seg_desc_len are not necessary: 1. We already hardcoded exact size for g_malloc0(), so why are we calculating the size again dynamically? 2. The populate functions assume the caller already knows the size since there is no buffer length argument to prevent overflows. It's cleaner to use hardcoded offsets: iscsi_xcopy_populate_header(buf, 1, 0, 2 /* LIST_ID_USAGE_DISCARD */, 0, 2 * XCOPY_TGT_DESC_LEN, XCOPY_SEG_DESC_LEN, 0); iscsi_populate_target_desc(&buf[XCOPY_SRC_OFFSET], src); iscsi_populate_target_desc(&buf[XCOPY_DST_OFFSET], dst); iscsi_xcopy_populate_desc(&buf[XCOPY_SEG_OFFSET], 0, 0, 0, 1, num_blocks, src_lba, dst_lba); Then the populate functions don't need to return sizes and we don't have to pretend that offsets are calculated dynamically. > + while (!iscsi_task.complete) { > + iscsi_set_events(dst_lun); > + qemu_mutex_unlock(&dst_lun->mutex); > + qemu_coroutine_yield(); > + qemu_mutex_lock(&dst_lun->mutex); > + } This code is duplicated several times already. Please create a helper function as a separate patch before adding xcopy support: /* Yield until @iTask has completed */ static void coroutine_fn iscsi_co_wait_for_task(IscsiTask *iTask, IscsiLun *iscsilun);
On Thu, 05/03 11:27, Stefan Hajnoczi wrote: > On Wed, Apr 18, 2018 at 11:04:22AM +0800, Fam Zheng wrote: > > +static void iscsi_save_designator(IscsiLun *lun, > > + struct scsi_inquiry_device_identification *inq_di) > > +{ > > + struct scsi_inquiry_device_designator *desig, *copy = NULL; > > + > > + for (desig = inq_di->designators; desig; desig = desig->next) { > > + if (desig->association || > > + desig->designator_type > SCSI_DESIGNATOR_TYPE_NAA) { > > + continue; > > + } > > + /* NAA works better than T10 vendor ID based designator. */ > > + if (!copy || copy->designator_type < desig->designator_type) { > > + copy = desig; > > + } > > + } > > + if (copy) { > > + lun->dd = g_new(struct scsi_inquiry_device_designator, 1); > > + *lun->dd = *copy; > > Just in case: > > lun->dd->next = NULL; Sure. > > > + lun->dd->designator = g_malloc(copy->designator_length); > > + memcpy(lun->dd->designator, copy->designator, copy->designator_length); > > + } > > +} > > + > > static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, > > Error **errp) > > { > > @@ -1922,6 +1946,7 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, > > struct scsi_task *inq_task; > > struct scsi_inquiry_logical_block_provisioning *inq_lbp; > > struct scsi_inquiry_block_limits *inq_bl; > > + struct scsi_inquiry_device_identification *inq_di; > > switch (inq_vpd->pages[i]) { > > case SCSI_INQUIRY_PAGECODE_LOGICAL_BLOCK_PROVISIONING: > > inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1, > > @@ -1947,6 +1972,17 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, > > sizeof(struct scsi_inquiry_block_limits)); > > scsi_free_scsi_task(inq_task); > > break; > > + case SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION: > > The device designator part should probably be a separate patch. Good idea, I'll do the split. > > > + inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1, > > + SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION, > > + (void **) &inq_di, errp); > > + if (inq_task == NULL) { > > + ret = -EINVAL; > > + goto out; > > + } > > + iscsi_save_designator(iscsilun, inq_di); > > + scsi_free_scsi_task(inq_task); > > + break; > > default: > > break; > > } > > @@ -2003,6 +2039,8 @@ static void iscsi_close(BlockDriverState *bs) > > iscsi_logout_sync(iscsi); > > } > > iscsi_destroy_context(iscsi); > > + g_free(iscsilun->dd->designator); > > Can iscsilun->dd be NULL? Yes, if the INQUIRY response isn't typical. Will add an if here. > > > +static void iscsi_xcopy_data(struct iscsi_data *data, > > + IscsiLun *src, int64_t src_lba, > > + IscsiLun *dst, int64_t dst_lba, > > + int num_blocks) > > It's not obvious that int is the appropriate type for num_blocks. The > caller had a uint64_t value. Also, IscsiLun->num_blocks is uint64_t. This is limited by the field size in the command data (2 bytes) so int is big enough, although unsigned is better. I can change the type, add a comment and an assert. > > > +{ > > + uint8_t *buf; > > + int offset; > > + int tgt_desc_len, seg_desc_len; > > + > > + data->size = XCOPY_DESC_OFFSET + > > struct iscsi_data->size is size_t. Why does this function and the > populate function use int for memory offsets/lengths? > > > + 32 * 2 + /* IDENT_DESCR_TGT_DESCR */ > > + 28; /* BLK_TO_BLK_SEG_DESCR */ > > + data->data = g_malloc0(data->size); > > + buf = data->data; > > + > > + /* Initialise CSCD list with one src + one dst descriptor */ > > + offset = XCOPY_DESC_OFFSET; > > + offset += iscsi_populate_target_desc(buf + offset, src); > > + offset += iscsi_populate_target_desc(buf + offset, dst); > > + tgt_desc_len = offset - XCOPY_DESC_OFFSET; > > + > > + /* Initialise one segment descriptor */ > > + seg_desc_len = iscsi_xcopy_populate_desc(buf + offset, 0, 0, > > + 0, 1, num_blocks, > > + src_lba, dst_lba); > > + offset += seg_desc_len; > > + > > + /* Initialise the parameter list header */ > > + iscsi_xcopy_populate_header(buf, 1, 0, 2 /* LIST_ID_USAGE_DISCARD */, > > + 0, tgt_desc_len, seg_desc_len, 0); > > offset, tgt_desc_len, and seg_desc_len are not necessary: > > 1. We already hardcoded exact size for g_malloc0(), so why are we > calculating the size again dynamically? > > 2. The populate functions assume the caller already knows the size > since there is no buffer length argument to prevent overflows. > > It's cleaner to use hardcoded offsets: > > iscsi_xcopy_populate_header(buf, 1, 0, 2 /* LIST_ID_USAGE_DISCARD */, > 0, 2 * XCOPY_TGT_DESC_LEN, > XCOPY_SEG_DESC_LEN, 0); > iscsi_populate_target_desc(&buf[XCOPY_SRC_OFFSET], src); > iscsi_populate_target_desc(&buf[XCOPY_DST_OFFSET], dst); > iscsi_xcopy_populate_desc(&buf[XCOPY_SEG_OFFSET], 0, 0, 0, 1, > num_blocks, src_lba, dst_lba); > > Then the populate functions don't need to return sizes and we don't have > to pretend that offsets are calculated dynamically. The data types and offset calculation issues are all copyied from libiscsi example, I'll clean up as you suggested. Thanks. > > > + while (!iscsi_task.complete) { > > + iscsi_set_events(dst_lun); > > + qemu_mutex_unlock(&dst_lun->mutex); > > + qemu_coroutine_yield(); > > + qemu_mutex_lock(&dst_lun->mutex); > > + } > > This code is duplicated several times already. Please create a helper > function as a separate patch before adding xcopy support: > > /* Yield until @iTask has completed */ > static void coroutine_fn iscsi_co_wait_for_task(IscsiTask *iTask, > IscsiLun *iscsilun); Yes, will do. Fam
diff --git a/block/iscsi.c b/block/iscsi.c index f5aecfc883..7d17e03ad3 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -68,6 +68,7 @@ typedef struct IscsiLun { QemuMutex mutex; struct scsi_inquiry_logical_block_provisioning lbp; struct scsi_inquiry_block_limits bl; + struct scsi_inquiry_device_designator *dd; unsigned char *zeroblock; /* The allocmap tracks which clusters (pages) on the iSCSI target are * allocated and which are not. In case a target returns zeros for @@ -1740,6 +1741,29 @@ static QemuOptsList runtime_opts = { }, }; +static void iscsi_save_designator(IscsiLun *lun, + struct scsi_inquiry_device_identification *inq_di) +{ + struct scsi_inquiry_device_designator *desig, *copy = NULL; + + for (desig = inq_di->designators; desig; desig = desig->next) { + if (desig->association || + desig->designator_type > SCSI_DESIGNATOR_TYPE_NAA) { + continue; + } + /* NAA works better than T10 vendor ID based designator. */ + if (!copy || copy->designator_type < desig->designator_type) { + copy = desig; + } + } + if (copy) { + lun->dd = g_new(struct scsi_inquiry_device_designator, 1); + *lun->dd = *copy; + lun->dd->designator = g_malloc(copy->designator_length); + memcpy(lun->dd->designator, copy->designator, copy->designator_length); + } +} + static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, Error **errp) { @@ -1922,6 +1946,7 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, struct scsi_task *inq_task; struct scsi_inquiry_logical_block_provisioning *inq_lbp; struct scsi_inquiry_block_limits *inq_bl; + struct scsi_inquiry_device_identification *inq_di; switch (inq_vpd->pages[i]) { case SCSI_INQUIRY_PAGECODE_LOGICAL_BLOCK_PROVISIONING: inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1, @@ -1947,6 +1972,17 @@ static int iscsi_open(BlockDriverState *bs, QDict *options, int flags, sizeof(struct scsi_inquiry_block_limits)); scsi_free_scsi_task(inq_task); break; + case SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION: + inq_task = iscsi_do_inquiry(iscsilun->iscsi, iscsilun->lun, 1, + SCSI_INQUIRY_PAGECODE_DEVICE_IDENTIFICATION, + (void **) &inq_di, errp); + if (inq_task == NULL) { + ret = -EINVAL; + goto out; + } + iscsi_save_designator(iscsilun, inq_di); + scsi_free_scsi_task(inq_task); + break; default: break; } @@ -2003,6 +2039,8 @@ static void iscsi_close(BlockDriverState *bs) iscsi_logout_sync(iscsi); } iscsi_destroy_context(iscsi); + g_free(iscsilun->dd->designator); + g_free(iscsilun->dd); g_free(iscsilun->zeroblock); iscsi_allocmap_free(iscsilun); qemu_mutex_destroy(&iscsilun->mutex); @@ -2184,6 +2222,230 @@ static void coroutine_fn iscsi_co_invalidate_cache(BlockDriverState *bs, iscsi_allocmap_invalidate(iscsilun); } +static int coroutine_fn iscsi_co_copy_range_from(BlockDriverState *bs, + BdrvChild *src, + uint64_t src_offset, + BdrvChild *dst, + uint64_t dst_offset, + uint64_t bytes, + BdrvRequestFlags flags) +{ + return bdrv_co_copy_range_to(src, src_offset, dst, dst_offset, bytes, flags); +} + +static struct scsi_task *iscsi_xcopy_task(int param_len) +{ + struct scsi_task *task; + + task = g_new0(struct scsi_task, 1); + + task->cdb[0] = EXTENDED_COPY; + task->cdb[10] = (param_len >> 24) & 0xFF; + task->cdb[11] = (param_len >> 16) & 0xFF; + task->cdb[12] = (param_len >> 8) & 0xFF; + task->cdb[13] = param_len & 0xFF; + task->cdb_size = 16; + task->xfer_dir = SCSI_XFER_WRITE; + task->expxferlen = param_len; + + return task; +} + +static int iscsi_populate_target_desc(unsigned char *desc, IscsiLun *lun) +{ + struct scsi_inquiry_device_designator *dd = lun->dd; + + memset(desc, 0, 32); + desc[0] = IDENT_DESCR_TGT_DESCR; + desc[4] = dd->code_set; + desc[5] = (dd->designator_type & 0xF) + | ((dd->association & 3) << 4); + desc[7] = dd->designator_length; + memcpy(desc + 8, dd->designator, dd->designator_length); + + desc[28] = 0; + desc[29] = (lun->block_size >> 16) & 0xFF; + desc[30] = (lun->block_size >> 8) & 0xFF; + desc[31] = lun->block_size & 0xFF; + + return 32; +} + +static int iscsi_xcopy_desc_hdr(uint8_t *hdr, int dc, int cat, int src_index, + int dst_index) +{ + int desc_len = 28; + + hdr[0] = 0x02; /* BLK_TO_BLK_SEG_DESCR */ + hdr[1] = ((dc << 1) | cat) & 0xFF; + hdr[2] = (desc_len >> 8) & 0xFF; + /* don't account for the first 4 bytes in descriptor header*/ + hdr[3] = (desc_len - 4 /* SEG_DESC_SRC_INDEX_OFFSET */) & 0xFF; + hdr[4] = (src_index >> 8) & 0xFF; + hdr[5] = src_index & 0xFF; + hdr[6] = (dst_index >> 8) & 0xFF; + hdr[7] = dst_index & 0xFF; + + return desc_len; +} + +static int iscsi_xcopy_populate_desc(uint8_t *desc, int dc, int cat, + int src_index, int dst_index, int num_blks, + uint64_t src_lba, uint64_t dst_lba) +{ + int desc_len = iscsi_xcopy_desc_hdr(desc, dc, cat, + src_index, dst_index); + + desc[10] = (num_blks >> 8) & 0xFF; + desc[11] = num_blks & 0xFF; + desc[12] = (src_lba >> 56) & 0xFF; + desc[13] = (src_lba >> 48) & 0xFF; + desc[14] = (src_lba >> 40) & 0xFF; + desc[15] = (src_lba >> 32) & 0xFF; + desc[16] = (src_lba >> 24) & 0xFF; + desc[17] = (src_lba >> 16) & 0xFF; + desc[18] = (src_lba >> 8) & 0xFF; + desc[19] = src_lba & 0xFF; + desc[20] = (dst_lba >> 56) & 0xFF; + desc[21] = (dst_lba >> 48) & 0xFF; + desc[22] = (dst_lba >> 40) & 0xFF; + desc[23] = (dst_lba >> 32) & 0xFF; + desc[24] = (dst_lba >> 24) & 0xFF; + desc[25] = (dst_lba >> 16) & 0xFF; + desc[26] = (dst_lba >> 8) & 0xFF; + desc[27] = dst_lba & 0xFF; + + return desc_len; +} + +static void iscsi_xcopy_populate_header(unsigned char *buf, int list_id, int str, + int list_id_usage, int prio, + int tgt_desc_len, + int seg_desc_len, int inline_data_len) +{ + buf[0] = list_id; + buf[1] = ((str & 1) << 5) | ((list_id_usage & 3) << 3) | (prio & 7); + buf[2] = (tgt_desc_len >> 8) & 0xFF; + buf[3] = tgt_desc_len & 0xFF; + buf[8] = (seg_desc_len >> 24) & 0xFF; + buf[9] = (seg_desc_len >> 16) & 0xFF; + buf[10] = (seg_desc_len >> 8) & 0xFF; + buf[11] = seg_desc_len & 0xFF; + buf[12] = (inline_data_len >> 24) & 0xFF; + buf[13] = (inline_data_len >> 16) & 0xFF; + buf[14] = (inline_data_len >> 8) & 0xFF; + buf[15] = inline_data_len & 0xFF; +} + +static void iscsi_xcopy_data(struct iscsi_data *data, + IscsiLun *src, int64_t src_lba, + IscsiLun *dst, int64_t dst_lba, + int num_blocks) +{ + uint8_t *buf; + int offset; + int tgt_desc_len, seg_desc_len; + + data->size = XCOPY_DESC_OFFSET + + 32 * 2 + /* IDENT_DESCR_TGT_DESCR */ + 28; /* BLK_TO_BLK_SEG_DESCR */ + data->data = g_malloc0(data->size); + buf = data->data; + + /* Initialise CSCD list with one src + one dst descriptor */ + offset = XCOPY_DESC_OFFSET; + offset += iscsi_populate_target_desc(buf + offset, src); + offset += iscsi_populate_target_desc(buf + offset, dst); + tgt_desc_len = offset - XCOPY_DESC_OFFSET; + + /* Initialise one segment descriptor */ + seg_desc_len = iscsi_xcopy_populate_desc(buf + offset, 0, 0, + 0, 1, num_blocks, + src_lba, dst_lba); + offset += seg_desc_len; + + /* Initialise the parameter list header */ + iscsi_xcopy_populate_header(buf, 1, 0, 2 /* LIST_ID_USAGE_DISCARD */, + 0, tgt_desc_len, seg_desc_len, 0); +} + +static int coroutine_fn iscsi_co_copy_range_to(BlockDriverState *bs, + BdrvChild *src, + uint64_t src_offset, + BdrvChild *dst, + uint64_t dst_offset, + uint64_t bytes, + BdrvRequestFlags flags) +{ + IscsiLun *dst_lun = dst->bs->opaque; + IscsiLun *src_lun; + struct IscsiTask iscsi_task; + struct iscsi_data data; + int r = 0; + int block_size; + + if (src->bs->drv->bdrv_co_copy_range_to != iscsi_co_copy_range_to) { + return -ENOTSUP; + } + src_lun = src->bs->opaque; + + if (!src_lun->dd || !dst_lun->dd) { + return -ENOTSUP; + } + if (!is_byte_request_lun_aligned(dst_offset, bytes, dst_lun)) { + return -ENOTSUP; + } + if (!is_byte_request_lun_aligned(src_offset, bytes, src_lun)) { + return -ENOTSUP; + } + if (dst_lun->block_size != src_lun->block_size || + !dst_lun->block_size) { + return -ENOTSUP; + } + + block_size = dst_lun->block_size; + iscsi_xcopy_data(&data, + src_lun, src_offset / block_size, + dst_lun, dst_offset / block_size, + bytes / block_size); + + iscsi_co_init_iscsitask(dst_lun, &iscsi_task); + + qemu_mutex_lock(&dst_lun->mutex); + iscsi_task.task = iscsi_xcopy_task(data.size); +retry: + if (iscsi_scsi_command_async(dst_lun->iscsi, dst_lun->lun, + iscsi_task.task, iscsi_co_generic_cb, + &data, + &iscsi_task) != 0) { + r = -EIO; + goto out_unlock; + } + + while (!iscsi_task.complete) { + iscsi_set_events(dst_lun); + qemu_mutex_unlock(&dst_lun->mutex); + qemu_coroutine_yield(); + qemu_mutex_lock(&dst_lun->mutex); + } + + if (iscsi_task.do_retry) { + iscsi_task.complete = 0; + goto retry; + } + + if (iscsi_task.status != SCSI_STATUS_GOOD) { + r = iscsi_task.err_code; + goto out_unlock; + } + +out_unlock: + g_free(iscsi_task.task); + qemu_mutex_unlock(&dst_lun->mutex); + g_free(iscsi_task.err_str); + return r; +} + static QemuOptsList iscsi_create_opts = { .name = "iscsi-create-opts", .head = QTAILQ_HEAD_INITIALIZER(iscsi_create_opts.head), @@ -2218,6 +2480,8 @@ static BlockDriver bdrv_iscsi = { .bdrv_co_block_status = iscsi_co_block_status, .bdrv_co_pdiscard = iscsi_co_pdiscard, + .bdrv_co_copy_range_from = iscsi_co_copy_range_from, + .bdrv_co_copy_range_to = iscsi_co_copy_range_to, .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes, .bdrv_co_readv = iscsi_co_readv, .bdrv_co_writev_flags = iscsi_co_writev_flags, @@ -2253,6 +2517,8 @@ static BlockDriver bdrv_iser = { .bdrv_co_block_status = iscsi_co_block_status, .bdrv_co_pdiscard = iscsi_co_pdiscard, + .bdrv_co_copy_range_from = iscsi_co_copy_range_from, + .bdrv_co_copy_range_to = iscsi_co_copy_range_to, .bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes, .bdrv_co_readv = iscsi_co_readv, .bdrv_co_writev_flags = iscsi_co_writev_flags, diff --git a/include/scsi/constants.h b/include/scsi/constants.h index a141dd71f8..a4a393ff1f 100644 --- a/include/scsi/constants.h +++ b/include/scsi/constants.h @@ -311,4 +311,7 @@ #define MMC_PROFILE_HDDVD_RW_DL 0x005A #define MMC_PROFILE_INVALID 0xFFFF +#define XCOPY_DESC_OFFSET 16 +#define IDENT_DESCR_TGT_DESCR 0xE4 + #endif
Issue EXTENDED COPY (LID1) command to implement the copy_range API. The parameter data construction code is ported from libiscsi's iscsi-dd.c. Signed-off-by: Fam Zheng <famz@redhat.com> --- block/iscsi.c | 266 +++++++++++++++++++++++++++++++++++++++++++++++ include/scsi/constants.h | 3 + 2 files changed, 269 insertions(+)