| Message ID | 20181218075707.12006-5-anton.nefedov@virtuozzo.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | qcow2: cluster space preallocation | expand |
18.12.2018 10:57, Anton Nefedov wrote: > The flag is supposed to indicate that the region of the disk image has > to be sufficiently allocated so it reads as zeroes. > > The call with the flag set must return -ENOTSUP if allocation cannot > be done efficiently. > This has to be made sure of by both > - the drivers that support the flag > - and the common block layer (so it will not fall back to any slowpath > (like writing zero buffers) in case the driver does not support > the flag). > > Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> > --- > include/block/block.h | 10 +++++++++- > include/block/block_int.h | 3 ++- > block/io.c | 14 +++++++++++++- > 3 files changed, 24 insertions(+), 3 deletions(-) > > diff --git a/include/block/block.h b/include/block/block.h > index f70a843b72..643d32f4b8 100644 > --- a/include/block/block.h > +++ b/include/block/block.h > @@ -83,8 +83,16 @@ typedef enum { > */ > BDRV_REQ_SERIALISING = 0x80, > > + /* > + * The BDRV_REQ_ALLOCATE flag is used to indicate that the driver has to > + * efficiently allocate the space so it reads as zeroes, or return an error. > + * If this flag is set then BDRV_REQ_ZERO_WRITE must also be set. > + * This flag cannot be set together with BDRV_REQ_MAY_UNMAP. > + */ > + BDRV_REQ_ALLOCATE = 0x100, > + > /* Mask of valid flags */ > - BDRV_REQ_MASK = 0xff, > + BDRV_REQ_MASK = 0x1ff, > } BdrvRequestFlags; > > typedef struct BlockSizes { > diff --git a/include/block/block_int.h b/include/block/block_int.h > index f605622216..833129d912 100644 > --- a/include/block/block_int.h > +++ b/include/block/block_int.h > @@ -724,7 +724,8 @@ struct BlockDriverState { > * their children. */ > unsigned int supported_write_flags; > /* Flags honored during pwrite_zeroes (so far: BDRV_REQ_FUA, > - * BDRV_REQ_MAY_UNMAP, BDRV_REQ_WRITE_UNCHANGED) */ > + * BDRV_REQ_MAY_UNMAP, BDRV_REQ_WRITE_UNCHANGED, BDRV_REQ_ALLOCATE) > + */ > unsigned int supported_zero_flags; > > /* the following member gives a name to every node on the bs graph. */ > diff --git a/block/io.c b/block/io.c > index bd9d688f8b..66006a089d 100644 > --- a/block/io.c > +++ b/block/io.c > @@ -1534,7 +1534,7 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs, > assert(!bs->supported_zero_flags); > } > > - if (ret == -ENOTSUP) { > + if (ret == -ENOTSUP && !(flags & BDRV_REQ_ALLOCATE)) { > /* Fall back to bounce buffer if write zeroes is unsupported */ > BdrvRequestFlags write_flags = flags & ~BDRV_REQ_ZERO_WRITE; > > @@ -1773,6 +1773,9 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BdrvChild *child, > > assert(flags & BDRV_REQ_ZERO_WRITE); > if (head_padding_bytes || tail_padding_bytes) { > + if (flags & BDRV_REQ_ALLOCATE) { > + return -ENOTSUP; > + } > buf = qemu_blockalign(bs, align); > iov = (struct iovec) { > .iov_base = buf, > @@ -1858,6 +1861,9 @@ int coroutine_fn bdrv_co_pwritev(BdrvChild *child, > bool use_local_qiov = false; > int ret; > > + assert(!((flags & BDRV_REQ_ALLOCATE) && (flags & BDRV_REQ_MAY_UNMAP))); > + assert(!((flags & BDRV_REQ_ALLOCATE) && !(flags & BDRV_REQ_ZERO_WRITE))); > + > trace_bdrv_co_pwritev(child->bs, offset, bytes, flags); > > if (!bs->drv) { > @@ -1980,6 +1986,12 @@ int coroutine_fn bdrv_co_pwrite_zeroes(BdrvChild *child, int64_t offset, > { > trace_bdrv_co_pwrite_zeroes(child->bs, offset, bytes, flags); > > + if ((flags & BDRV_REQ_ALLOCATE) && > + !(child->bs->supported_zero_flags & BDRV_REQ_ALLOCATE)) > + { > + return -ENOTSUP; > + } Why don't we have this check in bdrv_co_pwritev? However, similar check about UNMAP is here too, so: Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> > + > if (!(child->bs->open_flags & BDRV_O_UNMAP)) { > flags &= ~BDRV_REQ_MAY_UNMAP; > } >
On Tue 18 Dec 2018 08:57:36 AM CET, Anton Nefedov wrote: > The flag is supposed to indicate that the region of the disk image has > to be sufficiently allocated so it reads as zeroes. > > The call with the flag set must return -ENOTSUP if allocation cannot > be done efficiently. > This has to be made sure of by both > - the drivers that support the flag > - and the common block layer (so it will not fall back to any slowpath > (like writing zero buffers) in case the driver does not support > the flag). > > Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Berto
diff --git a/include/block/block.h b/include/block/block.h index f70a843b72..643d32f4b8 100644 --- a/include/block/block.h +++ b/include/block/block.h @@ -83,8 +83,16 @@ typedef enum { */ BDRV_REQ_SERIALISING = 0x80, + /* + * The BDRV_REQ_ALLOCATE flag is used to indicate that the driver has to + * efficiently allocate the space so it reads as zeroes, or return an error. + * If this flag is set then BDRV_REQ_ZERO_WRITE must also be set. + * This flag cannot be set together with BDRV_REQ_MAY_UNMAP. + */ + BDRV_REQ_ALLOCATE = 0x100, + /* Mask of valid flags */ - BDRV_REQ_MASK = 0xff, + BDRV_REQ_MASK = 0x1ff, } BdrvRequestFlags; typedef struct BlockSizes { diff --git a/include/block/block_int.h b/include/block/block_int.h index f605622216..833129d912 100644 --- a/include/block/block_int.h +++ b/include/block/block_int.h @@ -724,7 +724,8 @@ struct BlockDriverState { * their children. */ unsigned int supported_write_flags; /* Flags honored during pwrite_zeroes (so far: BDRV_REQ_FUA, - * BDRV_REQ_MAY_UNMAP, BDRV_REQ_WRITE_UNCHANGED) */ + * BDRV_REQ_MAY_UNMAP, BDRV_REQ_WRITE_UNCHANGED, BDRV_REQ_ALLOCATE) + */ unsigned int supported_zero_flags; /* the following member gives a name to every node on the bs graph. */ diff --git a/block/io.c b/block/io.c index bd9d688f8b..66006a089d 100644 --- a/block/io.c +++ b/block/io.c @@ -1534,7 +1534,7 @@ static int coroutine_fn bdrv_co_do_pwrite_zeroes(BlockDriverState *bs, assert(!bs->supported_zero_flags); } - if (ret == -ENOTSUP) { + if (ret == -ENOTSUP && !(flags & BDRV_REQ_ALLOCATE)) { /* Fall back to bounce buffer if write zeroes is unsupported */ BdrvRequestFlags write_flags = flags & ~BDRV_REQ_ZERO_WRITE; @@ -1773,6 +1773,9 @@ static int coroutine_fn bdrv_co_do_zero_pwritev(BdrvChild *child, assert(flags & BDRV_REQ_ZERO_WRITE); if (head_padding_bytes || tail_padding_bytes) { + if (flags & BDRV_REQ_ALLOCATE) { + return -ENOTSUP; + } buf = qemu_blockalign(bs, align); iov = (struct iovec) { .iov_base = buf, @@ -1858,6 +1861,9 @@ int coroutine_fn bdrv_co_pwritev(BdrvChild *child, bool use_local_qiov = false; int ret; + assert(!((flags & BDRV_REQ_ALLOCATE) && (flags & BDRV_REQ_MAY_UNMAP))); + assert(!((flags & BDRV_REQ_ALLOCATE) && !(flags & BDRV_REQ_ZERO_WRITE))); + trace_bdrv_co_pwritev(child->bs, offset, bytes, flags); if (!bs->drv) { @@ -1980,6 +1986,12 @@ int coroutine_fn bdrv_co_pwrite_zeroes(BdrvChild *child, int64_t offset, { trace_bdrv_co_pwrite_zeroes(child->bs, offset, bytes, flags); + if ((flags & BDRV_REQ_ALLOCATE) && + !(child->bs->supported_zero_flags & BDRV_REQ_ALLOCATE)) + { + return -ENOTSUP; + } + if (!(child->bs->open_flags & BDRV_O_UNMAP)) { flags &= ~BDRV_REQ_MAY_UNMAP; }
The flag is supposed to indicate that the region of the disk image has to be sufficiently allocated so it reads as zeroes. The call with the flag set must return -ENOTSUP if allocation cannot be done efficiently. This has to be made sure of by both - the drivers that support the flag - and the common block layer (so it will not fall back to any slowpath (like writing zero buffers) in case the driver does not support the flag). Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> --- include/block/block.h | 10 +++++++++- include/block/block_int.h | 3 ++- block/io.c | 14 +++++++++++++- 3 files changed, 24 insertions(+), 3 deletions(-)