@@ -2160,6 +2160,18 @@ M: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
S: Maintained
F: contrib/elf2dmp/
+I2C and SMBus
+M: Corey Minyard <cminyard@mvista.com>
+S: Maintained
+F: hw/i2c/core.c
+F: hw/i2c/smbus_slave.c
+F: hw/i2c/smbus_master.c
+F: hw/i2c/smbus_eeprom.c
+F: include/hw/i2c/i2c.h
+F: include/hw/i2c/smbus_master.h
+F: include/hw/i2c/smbus_slave.h
+F: include/hw/i2c/smbus_eeprom.h
+
Usermode Emulation
------------------
Overall
@@ -18,7 +18,7 @@
#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/boards.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "qemu/log.h"
#include "sysemu/block-backend.h"
#include "hw/loader.h"
@@ -1,4 +1,4 @@
-common-obj-$(CONFIG_I2C) += core.o smbus.o
+common-obj-$(CONFIG_I2C) += core.o smbus_slave.o smbus_master.o
common-obj-$(CONFIG_SMBUS_EEPROM) += smbus_eeprom.o
common-obj-$(CONFIG_DDC) += i2c-ddc.o
common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
@@ -20,7 +20,7 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/i2c/pm_smbus.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_master.h"
#define SMBHSTSTS 0x00
#define SMBHSTCNT 0x02
@@ -27,7 +27,8 @@
#include "qapi/error.h"
#include "hw/hw.h"
#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_slave.h"
+#include "hw/i2c/smbus_eeprom.h"
//#define DEBUG
@@ -29,8 +29,6 @@
#include "hw/i2c/pm_smbus.h"
#include "hw/pci/pci.h"
#include "sysemu/sysemu.h"
-#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
#include "hw/i386/ich9.h"
new file mode 100644
@@ -0,0 +1,165 @@
+/*
+ * QEMU SMBus host (master) emulation.
+ *
+ * This code emulates SMBus transactions from the master point of view,
+ * it runs the individual I2C transaction to do the SMBus protocol
+ * over I2C.
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the LGPL.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/hw.h"
+#include "hw/i2c/i2c.h"
+#include "hw/i2c/smbus_master.h"
+
+/* Master device commands. */
+int smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
+{
+ if (i2c_start_transfer(bus, addr, read)) {
+ return -1;
+ }
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_receive_byte(I2CBus *bus, uint8_t addr)
+{
+ uint8_t data;
+
+ if (i2c_start_transfer(bus, addr, 1)) {
+ return -1;
+ }
+ data = i2c_recv(bus);
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, data);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+ uint8_t data;
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ if (i2c_start_transfer(bus, addr, 1)) {
+ i2c_end_transfer(bus);
+ return -1;
+ }
+ data = i2c_recv(bus);
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_send(bus, data);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
+{
+ uint16_t data;
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ if (i2c_start_transfer(bus, addr, 1)) {
+ i2c_end_transfer(bus);
+ return -1;
+ }
+ data = i2c_recv(bus);
+ data |= i2c_recv(bus) << 8;
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return data;
+}
+
+int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data)
+{
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ i2c_send(bus, data & 0xff);
+ i2c_send(bus, data >> 8);
+ i2c_end_transfer(bus);
+ return 0;
+}
+
+int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool recv_len, bool send_cmd)
+{
+ int rlen;
+ int i;
+
+ if (send_cmd) {
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ }
+ if (i2c_start_transfer(bus, addr, 1)) {
+ if (send_cmd) {
+ i2c_end_transfer(bus);
+ }
+ return -1;
+ }
+ if (recv_len) {
+ rlen = i2c_recv(bus);
+ } else {
+ rlen = len;
+ }
+ if (rlen > len) {
+ rlen = 0;
+ }
+ for (i = 0; i < rlen; i++) {
+ data[i] = i2c_recv(bus);
+ }
+ i2c_nack(bus);
+ i2c_end_transfer(bus);
+ return rlen;
+}
+
+int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool send_len)
+{
+ int i;
+
+ if (len > 32) {
+ len = 32;
+ }
+
+ if (i2c_start_transfer(bus, addr, 0)) {
+ return -1;
+ }
+ i2c_send(bus, command);
+ if (send_len) {
+ i2c_send(bus, len);
+ }
+ for (i = 0; i < len; i++) {
+ i2c_send(bus, data[i]);
+ }
+ i2c_end_transfer(bus);
+ return 0;
+}
similarity index 65%
rename from hw/i2c/smbus.c
rename to hw/i2c/smbus_slave.c
@@ -1,6 +1,10 @@
/*
* QEMU SMBus device emulation.
*
+ * This code is a helper for SMBus device emulation. It implements an
+ * I2C device inteface and runs the SMBus protocol from the device
+ * point of view and maps those to simple calls to emulate.
+ *
* Copyright (c) 2007 CodeSourcery.
* Written by Paul Brook
*
@@ -12,7 +16,7 @@
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_slave.h"
//#define DEBUG_SMBUS 1
@@ -206,153 +210,6 @@ static int smbus_i2c_send(I2CSlave *s, uint8_t data)
return 0;
}
-/* Master device commands. */
-int smbus_quick_command(I2CBus *bus, uint8_t addr, int read)
-{
- if (i2c_start_transfer(bus, addr, read)) {
- return -1;
- }
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_receive_byte(I2CBus *bus, uint8_t addr)
-{
- uint8_t data;
-
- if (i2c_start_transfer(bus, addr, 1)) {
- return -1;
- }
- data = i2c_recv(bus);
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return data;
-}
-
-int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data)
-{
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, data);
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command)
-{
- uint8_t data;
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- if (i2c_start_transfer(bus, addr, 1)) {
- i2c_end_transfer(bus);
- return -1;
- }
- data = i2c_recv(bus);
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return data;
-}
-
-int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data)
-{
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- i2c_send(bus, data);
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command)
-{
- uint16_t data;
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- if (i2c_start_transfer(bus, addr, 1)) {
- i2c_end_transfer(bus);
- return -1;
- }
- data = i2c_recv(bus);
- data |= i2c_recv(bus) << 8;
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return data;
-}
-
-int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data)
-{
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- i2c_send(bus, data & 0xff);
- i2c_send(bus, data >> 8);
- i2c_end_transfer(bus);
- return 0;
-}
-
-int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool recv_len, bool send_cmd)
-{
- int rlen;
- int i;
-
- if (send_cmd) {
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- }
- if (i2c_start_transfer(bus, addr, 1)) {
- if (send_cmd) {
- i2c_end_transfer(bus);
- }
- return -1;
- }
- if (recv_len) {
- rlen = i2c_recv(bus);
- } else {
- rlen = len;
- }
- if (rlen > len) {
- rlen = 0;
- }
- for (i = 0; i < rlen; i++) {
- data[i] = i2c_recv(bus);
- }
- i2c_nack(bus);
- i2c_end_transfer(bus);
- return rlen;
-}
-
-int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool send_len)
-{
- int i;
-
- if (len > 32)
- len = 32;
-
- if (i2c_start_transfer(bus, addr, 0)) {
- return -1;
- }
- i2c_send(bus, command);
- if (send_len) {
- i2c_send(bus, len);
- }
- for (i = 0; i < len; i++) {
- i2c_send(bus, data[i]);
- }
- i2c_end_transfer(bus);
- return 0;
-}
-
static void smbus_device_class_init(ObjectClass *klass, void *data)
{
I2CSlaveClass *sc = I2C_SLAVE_CLASS(klass);
@@ -42,7 +42,7 @@
#include "sysemu/sysemu.h"
#include "hw/sysbus.h"
#include "sysemu/arch_init.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/xen/xen.h"
#include "exec/memory.h"
#include "exec/address-spaces.h"
@@ -33,7 +33,7 @@
#include "hw/hw.h"
#include "hw/loader.h"
#include "sysemu/arch_init.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/boards.h"
#include "hw/timer/mc146818rtc.h"
#include "hw/xen/xen.h"
@@ -14,7 +14,6 @@
#include "hw/hw.h"
#include "hw/isa/vt82c686.h"
#include "hw/i2c/i2c.h"
-#include "hw/i2c/smbus.h"
#include "hw/pci/pci.h"
#include "hw/isa/isa.h"
#include "hw/isa/superio.h"
@@ -28,7 +28,7 @@
#include "hw/isa/superio.h"
#include "net/net.h"
#include "hw/boards.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/block/flash.h"
#include "hw/mips/mips.h"
#include "hw/mips/cpudevs.h"
@@ -33,7 +33,7 @@
#include "hw/char/serial.h"
#include "net/net.h"
#include "hw/boards.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/block/flash.h"
#include "hw/mips/mips.h"
#include "hw/mips/cpudevs.h"
@@ -34,7 +34,7 @@
#include "hw/sysbus.h"
#include "hw/char/serial.h"
#include "hw/i2c/ppc4xx_i2c.h"
-#include "hw/i2c/smbus.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/usb/hcd-ehci.h"
#include "hw/ppc/fdt.h"
@@ -1,6 +1,8 @@
#ifndef PM_SMBUS_H
#define PM_SMBUS_H
+#include "hw/i2c/smbus_master.h"
+
#define PM_SMBUS_MAX_MSG_SIZE 32
typedef struct PMSMBus {
new file mode 100644
@@ -0,0 +1,35 @@
+/*
+ * QEMU SMBus EEPROM API
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SMBUS_EEPROM_H
+#define HW_SMBUS_EEPROM_H
+
+#include "hw/i2c/i2c.h"
+
+void smbus_eeprom_init_one(I2CBus *bus, uint8_t address, uint8_t *eeprom_buf);
+void smbus_eeprom_init(I2CBus *bus, int nb_eeprom,
+ const uint8_t *eeprom_spd, int size);
+
+enum sdram_type { SDR = 0x4, DDR = 0x7, DDR2 = 0x8 };
+uint8_t *spd_data_generate(enum sdram_type type, ram_addr_t size, Error **errp);
+
+#endif
new file mode 100644
@@ -0,0 +1,55 @@
+/*
+ * QEMU SMBus host (master) API
+ *
+ * Copyright (c) 2007 Arastra, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_SMBUS_MASTER_H
+#define HW_SMBUS_MASTER_H
+
+#include "hw/i2c/i2c.h"
+
+/* Master device commands. */
+int smbus_quick_command(I2CBus *bus, uint8_t addr, int read);
+int smbus_receive_byte(I2CBus *bus, uint8_t addr);
+int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data);
+int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command);
+int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data);
+int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command);
+int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data);
+
+/*
+ * Do a block transfer from an I2C device. If recv_len is set, then the
+ * first received byte is a length field and is used to know how much data
+ * to receive. Otherwise receive "len" bytes. If send_cmd is set, send
+ * the command byte first before receiving the data.
+ */
+int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool recv_len, bool send_cmd);
+
+/*
+ * Do a block transfer to an I2C device. If send_len is set, send the
+ * "len" value before the data.
+ */
+int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
+ int len, bool send_len);
+
+#endif
similarity index 63%
rename from include/hw/i2c/smbus.h
rename to include/hw/i2c/smbus_slave.h
@@ -1,8 +1,5 @@
-#ifndef QEMU_SMBUS_H
-#define QEMU_SMBUS_H
-
/*
- * QEMU SMBus API
+ * QEMU SMBus device (slave) API
*
* Copyright (c) 2007 Arastra, Inc.
*
@@ -25,6 +22,9 @@
* THE SOFTWARE.
*/
+#ifndef HW_SMBUS_SLAVE_H
+#define HW_SMBUS_SLAVE_H
+
#include "hw/i2c/i2c.h"
#define TYPE_SMBUS_DEVICE "smbus-device"
@@ -66,36 +66,4 @@ struct SMBusDevice {
uint8_t command;
};
-/* Master device commands. */
-int smbus_quick_command(I2CBus *bus, uint8_t addr, int read);
-int smbus_receive_byte(I2CBus *bus, uint8_t addr);
-int smbus_send_byte(I2CBus *bus, uint8_t addr, uint8_t data);
-int smbus_read_byte(I2CBus *bus, uint8_t addr, uint8_t command);
-int smbus_write_byte(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t data);
-int smbus_read_word(I2CBus *bus, uint8_t addr, uint8_t command);
-int smbus_write_word(I2CBus *bus, uint8_t addr, uint8_t command, uint16_t data);
-
-/*
- * Do a block transfer from an I2C device. If recv_len is set, then the
- * first received byte is a length field and is used to know how much data
- * to receive. Otherwise receive "len" bytes. If send_cmd is set, send
- * the command byte first before receiving the data.
- */
-int smbus_read_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool recv_len, bool send_cmd);
-
-/*
- * Do a block transfer to an I2C device. If send_len is set, send the
- * "len" value before the data.
- */
-int smbus_write_block(I2CBus *bus, uint8_t addr, uint8_t command, uint8_t *data,
- int len, bool send_len);
-
-void smbus_eeprom_init_one(I2CBus *smbus, uint8_t address, uint8_t *eeprom_buf);
-void smbus_eeprom_init(I2CBus *smbus, int nb_eeprom,
- const uint8_t *eeprom_spd, int size);
-
-enum sdram_type { SDR = 0x4, DDR = 0x7, DDR2 = 0x8 };
-uint8_t *spd_data_generate(enum sdram_type type, ram_addr_t size, Error **errp);
-
#endif