[PULL,30/32] hw/riscv: Split out the boot functions

Message ID	20190703084048.6980-31-palmer@sifive.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org> Date: Wed, 3 Jul 2019 01:40:46 -0700 Message-Id: <20190703084048.6980-31-palmer@sifive.com> In-Reply-To: <20190703084048.6980-1-palmer@sifive.com> References: <20190703084048.6980-1-palmer@sifive.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit From: Palmer Dabbelt <palmer@sifive.com> To: Peter Maydell <peter.maydell@linaro.org> Subject: [Qemu-devel] [PULL 30/32] hw/riscv: Split out the boot functions Precedence: list Cc: Alistair Francis <alistair.francis@wdc.com>, Bin Meng <bmeng.cn@gmail.com>, qemu-riscv@nongnu.org, qemu-devel@nongnu.org, Palmer Dabbelt <palmer@sifive.com> Errors-To: qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org Sender: "Qemu-devel" <qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org>
Series	[PULL] RISC-V Patches for the 4.1 Soft Freeze, Part 2 v3 \| expand [PULL] RISC-V Patches for the 4.1 Soft Freeze, Part 2 v3 [PULL,02/32] sifive_prci: Read and write PRCI registers [PULL,03/32] target/riscv: Fix PMP range boundary address bug [PULL,04/32] target/riscv: Implement riscv_cpu_unassigned_access [PULL,05/32] RISC-V: Only Check PMP if MMU translation succeeds [PULL,06/32] RISC-V: Raise access fault exceptions on PMP violations [PULL,07/32] RISC-V: Check for the effective memory privilege mode during PMP checks [PULL,08/32] RISC-V: Check PMP during Page Table Walks [PULL,09/32] RISC-V: Fix a PMP bug where it succeeds even if PMP entry is off [PULL,10/32] RISC-V: Fix a PMP check with the correct access size [PULL,11/32] riscv: virt: Correct pci "bus-range" encoding [PULL,12/32] RISC-V: Fix a memory leak when realizing a sifive_e [PULL,13/32] target/riscv: Restructure deprecatd CPUs [PULL,14/32] target/riscv: Add the privledge spec version 1.11.0 [PULL,15/32] target/riscv: Add the mcountinhibit CSR [PULL,16/32] target/riscv: Set privledge spec 1.11.0 as default [PULL,17/32] qemu-deprecated.texi: Deprecate the RISC-V privledge spec 1.09.1 [PULL,18/32] target/riscv: Require either I or E base extension [PULL,19/32] target/riscv: Remove user version information [PULL,20/32] target/riscv: Add support for disabling/enabling Counters [PULL,21/32] RISC-V: Add support for the Zifencei extension [PULL,22/32] RISC-V: Add support for the Zicsr extension [PULL,23/32] RISC-V: Clear load reservations on context switch and SC [PULL,24/32] RISC-V: Update syscall list for 32-bit support. [PULL,25/32] riscv: virt: Add cpu-topology DT node. [PULL,26/32] disas/riscv: Disassemble reserved compressed encodings as illegal [PULL,27/32] disas/riscv: Fix `rdinstreth` constraint [PULL,28/32] riscv: sifive_u: Do not create hard-coded phandles in DT [PULL,29/32] riscv: sifive_u: Update the plic hart config to support multicore [PULL,30/32] hw/riscv: Split out the boot functions [PULL,31/32] hw/riscv: Add support for loading a firmware [PULL,32/32] hw/riscv: Extend the kernel loading support

diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs index a65027304a2c..eb9d4f9ffc9e 100644 --- a/hw/riscv/Makefile.objs +++ b/hw/riscv/Makefile.objs @@ -1,3 +1,4 @@ +obj-y += boot.o obj-$(CONFIG_SPIKE) += riscv_htif.o obj-$(CONFIG_HART) += riscv_hart.o obj-$(CONFIG_SIFIVE_E) += sifive_e.o diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c new file mode 100644 index 000000000000..0c8e72e455d7 --- /dev/null +++ b/hw/riscv/boot.c @@ -0,0 +1,69 @@ +/* + * QEMU RISC-V Boot Helper + * + * Copyright (c) 2017 SiFive, Inc. + * Copyright (c) 2019 Alistair Francis <alistair.francis@wdc.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qemu/error-report.h" +#include "exec/cpu-defs.h" +#include "hw/loader.h" +#include "hw/riscv/boot.h" +#include "elf.h" + +target_ulong riscv_load_kernel(const char *kernel_filename) +{ + uint64_t kernel_entry, kernel_high; + + if (load_elf(kernel_filename, NULL, NULL, NULL, + &kernel_entry, NULL, &kernel_high, 0, EM_RISCV, 1, 0) < 0) { + error_report("could not load kernel '%s'", kernel_filename); + exit(1); + } + + return kernel_entry; +} + +hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size, + uint64_t kernel_entry, hwaddr *start) +{ + int size; + + /* + * We want to put the initrd far enough into RAM that when the + * kernel is uncompressed it will not clobber the initrd. However + * on boards without much RAM we must ensure that we still leave + * enough room for a decent sized initrd, and on boards with large + * amounts of RAM we must avoid the initrd being so far up in RAM + * that it is outside lowmem and inaccessible to the kernel. + * So for boards with less than 256MB of RAM we put the initrd + * halfway into RAM, and for boards with 256MB of RAM or more we put + * the initrd at 128MB. + */ + *start = kernel_entry + MIN(mem_size / 2, 128 * MiB); + + size = load_ramdisk(filename, *start, mem_size - *start); + if (size == -1) { + size = load_image_targphys(filename, *start, mem_size - *start); + if (size == -1) { + error_report("could not load ramdisk '%s'", filename); + exit(1); + } + } + + return *start + size; +} diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index a5b4086da36d..d27f626529fe 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -44,10 +44,10 @@ #include "hw/riscv/sifive_prci.h" #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_e.h" +#include "hw/riscv/boot.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "exec/address-spaces.h" -#include "elf.h" static const struct MemmapEntry { hwaddr base; @@ -74,19 +74,6 @@ static const struct MemmapEntry { [SIFIVE_E_DTIM] = { 0x80000000, 0x4000 } }; -static target_ulong load_kernel(const char *kernel_filename) -{ - uint64_t kernel_entry, kernel_high; - - if (load_elf(kernel_filename, NULL, NULL, NULL, - &kernel_entry, NULL, &kernel_high, - 0, EM_RISCV, 1, 0) < 0) { - error_report("could not load kernel '%s'", kernel_filename); - exit(1); - } - return kernel_entry; -} - static void sifive_mmio_emulate(MemoryRegion *parent, const char *name, uintptr_t offset, uintptr_t length) { @@ -131,7 +118,7 @@ static void riscv_sifive_e_init(MachineState *machine) memmap[SIFIVE_E_MROM].base, &address_space_memory); if (machine->kernel_filename) { - load_kernel(machine->kernel_filename); + riscv_load_kernel(machine->kernel_filename); } } diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index a416d5d08b4d..f6b9c12e6094 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -41,11 +41,11 @@ #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_prci.h" #include "hw/riscv/sifive_u.h" +#include "hw/riscv/boot.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/device_tree.h" #include "exec/address-spaces.h" -#include "elf.h" #include <libfdt.h> @@ -65,19 +65,6 @@ static const struct MemmapEntry { #define GEM_REVISION 0x10070109 -static target_ulong load_kernel(const char *kernel_filename) -{ - uint64_t kernel_entry, kernel_high; - - if (load_elf(kernel_filename, NULL, NULL, NULL, - &kernel_entry, NULL, &kernel_high, - 0, EM_RISCV, 1, 0) < 0) { - error_report("could not load kernel '%s'", kernel_filename); - exit(1); - } - return kernel_entry; -} - static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, uint64_t mem_size, const char *cmdline) { @@ -283,7 +270,7 @@ static void riscv_sifive_u_init(MachineState *machine) create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); if (machine->kernel_filename) { - load_kernel(machine->kernel_filename); + riscv_load_kernel(machine->kernel_filename); } /* reset vector */ diff --git a/hw/riscv/spike.c b/hw/riscv/spike.c index 5b33d4be3bbc..e68be00a5fe8 100644 --- a/hw/riscv/spike.c +++ b/hw/riscv/spike.c @@ -36,12 +36,12 @@ #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_clint.h" #include "hw/riscv/spike.h" +#include "hw/riscv/boot.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/device_tree.h" #include "sysemu/qtest.h" #include "exec/address-spaces.h" -#include "elf.h" #include <libfdt.h> @@ -54,19 +54,6 @@ static const struct MemmapEntry { [SPIKE_DRAM] = { 0x80000000, 0x0 }, }; -static target_ulong load_kernel(const char *kernel_filename) -{ - uint64_t kernel_entry, kernel_high; - - if (load_elf_ram_sym(kernel_filename, NULL, NULL, NULL, - &kernel_entry, NULL, &kernel_high, 0, EM_RISCV, 1, 0, - NULL, true, htif_symbol_callback) < 0) { - error_report("could not load kernel '%s'", kernel_filename); - exit(1); - } - return kernel_entry; -} - static void create_fdt(SpikeState *s, const struct MemmapEntry *memmap, uint64_t mem_size, const char *cmdline) { @@ -199,7 +186,7 @@ static void spike_board_init(MachineState *machine) mask_rom); if (machine->kernel_filename) { - load_kernel(machine->kernel_filename); + riscv_load_kernel(machine->kernel_filename); } /* reset vector */ @@ -287,7 +274,7 @@ static void spike_v1_10_0_board_init(MachineState *machine) mask_rom); if (machine->kernel_filename) { - load_kernel(machine->kernel_filename); + riscv_load_kernel(machine->kernel_filename); } /* reset vector */ @@ -372,7 +359,7 @@ static void spike_v1_09_1_board_init(MachineState *machine) mask_rom); if (machine->kernel_filename) { - load_kernel(machine->kernel_filename); + riscv_load_kernel(machine->kernel_filename); } /* reset vector */ diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index 28d96daf8c5b..485aefa99523 100644 --- a/hw/riscv/virt.c +++ b/hw/riscv/virt.c @@ -34,13 +34,13 @@ #include "hw/riscv/sifive_clint.h" #include "hw/riscv/sifive_test.h" #include "hw/riscv/virt.h" +#include "hw/riscv/boot.h" #include "chardev/char.h" #include "sysemu/arch_init.h" #include "sysemu/device_tree.h" #include "exec/address-spaces.h" #include "hw/pci/pci.h" #include "hw/pci-host/gpex.h" -#include "elf.h" #include <libfdt.h> @@ -61,47 +61,6 @@ static const struct MemmapEntry { [VIRT_PCIE_ECAM] = { 0x30000000, 0x10000000 }, }; -static target_ulong load_kernel(const char *kernel_filename) -{ - uint64_t kernel_entry, kernel_high; - - if (load_elf(kernel_filename, NULL, NULL, NULL, - &kernel_entry, NULL, &kernel_high, - 0, EM_RISCV, 1, 0) < 0) { - error_report("could not load kernel '%s'", kernel_filename); - exit(1); - } - return kernel_entry; -} - -static hwaddr load_initrd(const char *filename, uint64_t mem_size, - uint64_t kernel_entry, hwaddr *start) -{ - int size; - - /* We want to put the initrd far enough into RAM that when the - * kernel is uncompressed it will not clobber the initrd. However - * on boards without much RAM we must ensure that we still leave - * enough room for a decent sized initrd, and on boards with large - * amounts of RAM we must avoid the initrd being so far up in RAM - * that it is outside lowmem and inaccessible to the kernel. - * So for boards with less than 256MB of RAM we put the initrd - * halfway into RAM, and for boards with 256MB of RAM or more we put - * the initrd at 128MB. - */ - *start = kernel_entry + MIN(mem_size / 2, 128 * MiB); - - size = load_ramdisk(filename, *start, mem_size - *start); - if (size == -1) { - size = load_image_targphys(filename, *start, mem_size - *start); - if (size == -1) { - error_report("could not load ramdisk '%s'", filename); - exit(1); - } - } - return *start + size; -} - static void create_pcie_irq_map(void *fdt, char *nodename, uint32_t plic_phandle) { @@ -440,13 +399,13 @@ static void riscv_virt_board_init(MachineState *machine) mask_rom); if (machine->kernel_filename) { - uint64_t kernel_entry = load_kernel(machine->kernel_filename); + uint64_t kernel_entry = riscv_load_kernel(machine->kernel_filename); if (machine->initrd_filename) { hwaddr start; - hwaddr end = load_initrd(machine->initrd_filename, - machine->ram_size, kernel_entry, - &start); + hwaddr end = riscv_load_initrd(machine->initrd_filename, + machine->ram_size, kernel_entry, + &start); qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", start); qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h new file mode 100644 index 000000000000..f84fd6c2df5e --- /dev/null +++ b/include/hw/riscv/boot.h @@ -0,0 +1,27 @@ +/* + * QEMU RISC-V Boot Helper + * + * Copyright (c) 2017 SiFive, Inc. + * Copyright (c) 2019 Alistair Francis <alistair.francis@wdc.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef RISCV_BOOT_H +#define RISCV_BOOT_H + +target_ulong riscv_load_kernel(const char *kernel_filename); +hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size, + uint64_t kernel_entry, hwaddr *start); + +#endif /* RISCV_BOOT_H */

[PULL,30/32] hw/riscv: Split out the boot functions

Commit Message

Patch