| Message ID | 20190910095610.4546-4-beata.michalska@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | target/arm: Support for Data Cache Clean up to PoP | expand |
* Beata Michalska (beata.michalska@linaro.org) wrote: > Switch to ram block writeback for pmem migration. > > Signed-off-by: Beata Michalska <beata.michalska@linaro.org> > --- > migration/ram.c | 5 +---- > 1 file changed, 1 insertion(+), 4 deletions(-) > > diff --git a/migration/ram.c b/migration/ram.c > index b01a37e7ca..8ea0bd63fc 100644 > --- a/migration/ram.c > +++ b/migration/ram.c > @@ -33,7 +33,6 @@ > #include "qemu/bitops.h" > #include "qemu/bitmap.h" > #include "qemu/main-loop.h" > -#include "qemu/pmem.h" > #include "xbzrle.h" > #include "ram.h" > #include "migration.h" > @@ -4064,9 +4063,7 @@ static int ram_load_cleanup(void *opaque) > RAMBlock *rb; > > RAMBLOCK_FOREACH_NOT_IGNORED(rb) { > - if (ramblock_is_pmem(rb)) { > - pmem_persist(rb->host, rb->used_length); > - } > + qemu_ram_block_writeback(rb); ACK for migration Although I do worry that if you really have pmem hardware, is it better to fail the migration if you don't have libpmem available? Dave > } > > xbzrle_load_cleanup(); > -- > 2.17.1 > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
On Tue, 10 Sep 2019 at 12:26, Dr. David Alan Gilbert <dgilbert@redhat.com> wrote: > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > Switch to ram block writeback for pmem migration. > > > > Signed-off-by: Beata Michalska <beata.michalska@linaro.org> > > --- > > migration/ram.c | 5 +---- > > 1 file changed, 1 insertion(+), 4 deletions(-) > > > > diff --git a/migration/ram.c b/migration/ram.c > > index b01a37e7ca..8ea0bd63fc 100644 > > --- a/migration/ram.c > > +++ b/migration/ram.c > > @@ -33,7 +33,6 @@ > > #include "qemu/bitops.h" > > #include "qemu/bitmap.h" > > #include "qemu/main-loop.h" > > -#include "qemu/pmem.h" > > #include "xbzrle.h" > > #include "ram.h" > > #include "migration.h" > > @@ -4064,9 +4063,7 @@ static int ram_load_cleanup(void *opaque) > > RAMBlock *rb; > > > > RAMBLOCK_FOREACH_NOT_IGNORED(rb) { > > - if (ramblock_is_pmem(rb)) { > > - pmem_persist(rb->host, rb->used_length); > > - } > > + qemu_ram_block_writeback(rb); > > ACK for migration > > Although I do worry that if you really have pmem hardware, is it better > to fail the migration if you don't have libpmem available? According to the PMDG man page, pmem_persist is supposed to be equivalent for the msync. It's just more performant. So in case of real pmem hardware it should be all good. [http://pmem.io/pmdk/manpages/linux/v1.2/libpmem.3.html] BR Beata > > Dave > > > } > > > > xbzrle_load_cleanup(); > > -- > > 2.17.1 > > > -- > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
* Beata Michalska (beata.michalska@linaro.org) wrote: > On Tue, 10 Sep 2019 at 12:26, Dr. David Alan Gilbert > <dgilbert@redhat.com> wrote: > > > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > > Switch to ram block writeback for pmem migration. > > > > > > Signed-off-by: Beata Michalska <beata.michalska@linaro.org> > > > --- > > > migration/ram.c | 5 +---- > > > 1 file changed, 1 insertion(+), 4 deletions(-) > > > > > > diff --git a/migration/ram.c b/migration/ram.c > > > index b01a37e7ca..8ea0bd63fc 100644 > > > --- a/migration/ram.c > > > +++ b/migration/ram.c > > > @@ -33,7 +33,6 @@ > > > #include "qemu/bitops.h" > > > #include "qemu/bitmap.h" > > > #include "qemu/main-loop.h" > > > -#include "qemu/pmem.h" > > > #include "xbzrle.h" > > > #include "ram.h" > > > #include "migration.h" > > > @@ -4064,9 +4063,7 @@ static int ram_load_cleanup(void *opaque) > > > RAMBlock *rb; > > > > > > RAMBLOCK_FOREACH_NOT_IGNORED(rb) { > > > - if (ramblock_is_pmem(rb)) { > > > - pmem_persist(rb->host, rb->used_length); > > > - } > > > + qemu_ram_block_writeback(rb); > > > > ACK for migration > > > > Although I do worry that if you really have pmem hardware, is it better > > to fail the migration if you don't have libpmem available? > > According to the PMDG man page, pmem_persist is supposed to be > equivalent for the msync. OK, but you do define qemu_ram_block_writeback to fall back to fdatasync; so that would be too little? > It's just more performant. So in case of real pmem hardware it should > be all good. > > [http://pmem.io/pmdk/manpages/linux/v1.2/libpmem.3.html] Dave > > BR > Beata > > > > Dave > > > > > } > > > > > > xbzrle_load_cleanup(); > > > -- > > > 2.17.1 > > > > > -- > > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
On Tue, 10 Sep 2019 at 14:16, Dr. David Alan Gilbert <dgilbert@redhat.com> wrote: > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > On Tue, 10 Sep 2019 at 12:26, Dr. David Alan Gilbert > > <dgilbert@redhat.com> wrote: > > > > > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > > > Switch to ram block writeback for pmem migration. > > > > > > > > Signed-off-by: Beata Michalska <beata.michalska@linaro.org> > > > > --- > > > > migration/ram.c | 5 +---- > > > > 1 file changed, 1 insertion(+), 4 deletions(-) > > > > > > > > diff --git a/migration/ram.c b/migration/ram.c > > > > index b01a37e7ca..8ea0bd63fc 100644 > > > > --- a/migration/ram.c > > > > +++ b/migration/ram.c > > > > @@ -33,7 +33,6 @@ > > > > #include "qemu/bitops.h" > > > > #include "qemu/bitmap.h" > > > > #include "qemu/main-loop.h" > > > > -#include "qemu/pmem.h" > > > > #include "xbzrle.h" > > > > #include "ram.h" > > > > #include "migration.h" > > > > @@ -4064,9 +4063,7 @@ static int ram_load_cleanup(void *opaque) > > > > RAMBlock *rb; > > > > > > > > RAMBLOCK_FOREACH_NOT_IGNORED(rb) { > > > > - if (ramblock_is_pmem(rb)) { > > > > - pmem_persist(rb->host, rb->used_length); > > > > - } > > > > + qemu_ram_block_writeback(rb); > > > > > > ACK for migration > > > > > > Although I do worry that if you really have pmem hardware, is it better > > > to fail the migration if you don't have libpmem available? > > > > According to the PMDG man page, pmem_persist is supposed to be > > equivalent for the msync. > > OK, but you do define qemu_ram_block_writeback to fall back to fdatasync; > so that would be too little? Actually it shouldn't. All will end-up in vfs_fsync_range; msync will narrow the range. fdatasync will trigger the same call just that with a wider range. At least for Linux. fdatasync will also fallback to fsync if it is not available. So it's going from the best case scenario (as of performance and range of mem to be synced) towards the worst case one. I should probably double-check earlier versions of Linux. I'll also try to verify that for other host variants. BTW: Thank you for having a look at the changes. BR Beata > > > It's just more performant. So in case of real pmem hardware it should > > be all good. > > > > [http://pmem.io/pmdk/manpages/linux/v1.2/libpmem.3.html] > > Dave > > > > > BR > > Beata > > > > > > Dave > > > > > > > } > > > > > > > > xbzrle_load_cleanup(); > > > > -- > > > > 2.17.1 > > > > > > > -- > > > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK > -- > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
* Beata Michalska (beata.michalska@linaro.org) wrote: > On Tue, 10 Sep 2019 at 14:16, Dr. David Alan Gilbert > <dgilbert@redhat.com> wrote: > > > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > > On Tue, 10 Sep 2019 at 12:26, Dr. David Alan Gilbert > > > <dgilbert@redhat.com> wrote: > > > > > > > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > > > > Switch to ram block writeback for pmem migration. > > > > > > > > > > Signed-off-by: Beata Michalska <beata.michalska@linaro.org> > > > > > --- > > > > > migration/ram.c | 5 +---- > > > > > 1 file changed, 1 insertion(+), 4 deletions(-) > > > > > > > > > > diff --git a/migration/ram.c b/migration/ram.c > > > > > index b01a37e7ca..8ea0bd63fc 100644 > > > > > --- a/migration/ram.c > > > > > +++ b/migration/ram.c > > > > > @@ -33,7 +33,6 @@ > > > > > #include "qemu/bitops.h" > > > > > #include "qemu/bitmap.h" > > > > > #include "qemu/main-loop.h" > > > > > -#include "qemu/pmem.h" > > > > > #include "xbzrle.h" > > > > > #include "ram.h" > > > > > #include "migration.h" > > > > > @@ -4064,9 +4063,7 @@ static int ram_load_cleanup(void *opaque) > > > > > RAMBlock *rb; > > > > > > > > > > RAMBLOCK_FOREACH_NOT_IGNORED(rb) { > > > > > - if (ramblock_is_pmem(rb)) { > > > > > - pmem_persist(rb->host, rb->used_length); > > > > > - } > > > > > + qemu_ram_block_writeback(rb); > > > > > > > > ACK for migration > > > > > > > > Although I do worry that if you really have pmem hardware, is it better > > > > to fail the migration if you don't have libpmem available? > > > > > > According to the PMDG man page, pmem_persist is supposed to be > > > equivalent for the msync. > > > > OK, but you do define qemu_ram_block_writeback to fall back to fdatasync; > > so that would be too little? > > Actually it shouldn't. All will end-up in vfs_fsync_range; msync will > narrow the range. > fdatasync will trigger the same call just that with a wider range. At > least for Linux. > fdatasync will also fallback to fsync if it is not available. > So it's going from the best case scenario (as of performance and range of mem > to be synced) towards the worst case one. > > I should probably double-check earlier versions of Linux. > I'll also try to verify that for other host variants. Well I guess it should probably follow whatever Posix says; it's OK to make Linux specific assumptions for Linux specific bits - but you can't do it by code examination to guarantee it'll be right for other platforms, especially if this is in code ifdef'd for portability. Also it needs commenting to explain why it's safe to avoid someone else asking this question. > BTW: Thank you for having a look at the changes. No problem. Dave > BR > Beata > > > > > > It's just more performant. So in case of real pmem hardware it should > > > be all good. > > > > > > [http://pmem.io/pmdk/manpages/linux/v1.2/libpmem.3.html] > > > > Dave > > > > > > > > BR > > > Beata > > > > > > > > Dave > > > > > > > > > } > > > > > > > > > > xbzrle_load_cleanup(); > > > > > -- > > > > > 2.17.1 > > > > > > > > > -- > > > > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK > > -- > > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
On Wed, 11 Sep 2019 at 11:36, Dr. David Alan Gilbert <dgilbert@redhat.com> wrote: > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > On Tue, 10 Sep 2019 at 14:16, Dr. David Alan Gilbert > > <dgilbert@redhat.com> wrote: > > > > > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > > > On Tue, 10 Sep 2019 at 12:26, Dr. David Alan Gilbert > > > > <dgilbert@redhat.com> wrote: > > > > > > > > > > * Beata Michalska (beata.michalska@linaro.org) wrote: > > > > > > Switch to ram block writeback for pmem migration. > > > > > > > > > > > > Signed-off-by: Beata Michalska <beata.michalska@linaro.org> > > > > > > --- > > > > > > migration/ram.c | 5 +---- > > > > > > 1 file changed, 1 insertion(+), 4 deletions(-) > > > > > > > > > > > > diff --git a/migration/ram.c b/migration/ram.c > > > > > > index b01a37e7ca..8ea0bd63fc 100644 > > > > > > --- a/migration/ram.c > > > > > > +++ b/migration/ram.c > > > > > > @@ -33,7 +33,6 @@ > > > > > > #include "qemu/bitops.h" > > > > > > #include "qemu/bitmap.h" > > > > > > #include "qemu/main-loop.h" > > > > > > -#include "qemu/pmem.h" > > > > > > #include "xbzrle.h" > > > > > > #include "ram.h" > > > > > > #include "migration.h" > > > > > > @@ -4064,9 +4063,7 @@ static int ram_load_cleanup(void *opaque) > > > > > > RAMBlock *rb; > > > > > > > > > > > > RAMBLOCK_FOREACH_NOT_IGNORED(rb) { > > > > > > - if (ramblock_is_pmem(rb)) { > > > > > > - pmem_persist(rb->host, rb->used_length); > > > > > > - } > > > > > > + qemu_ram_block_writeback(rb); > > > > > > > > > > ACK for migration > > > > > > > > > > Although I do worry that if you really have pmem hardware, is it better > > > > > to fail the migration if you don't have libpmem available? > > > > > > > > According to the PMDG man page, pmem_persist is supposed to be > > > > equivalent for the msync. > > > > > > OK, but you do define qemu_ram_block_writeback to fall back to fdatasync; > > > so that would be too little? > > > > Actually it shouldn't. All will end-up in vfs_fsync_range; msync will > > narrow the range. > > fdatasync will trigger the same call just that with a wider range. At > > least for Linux. > > fdatasync will also fallback to fsync if it is not available. > > So it's going from the best case scenario (as of performance and range of mem > > to be synced) towards the worst case one. > > > > I should probably double-check earlier versions of Linux. > > I'll also try to verify that for other host variants. > > Well I guess it should probably follow whatever Posix says; it's OK to > make Linux specific assumptions for Linux specific bits - but you can't > do it by code examination to guarantee it'll be right for other > platforms, especially if this is in code ifdef'd for portability. > Also it needs commenting to explain why it's safe to avoid someone else > asking this question. > I will definitely address that in the next version. Will just wait a bit to potentially gather more input on the series. > > BTW: Thank you for having a look at the changes. > > No problem. > Thanks again. BR Beata > Dave > > > BR > > Beata > > > > > > > > > It's just more performant. So in case of real pmem hardware it should > > > > be all good. > > > > > > > > [http://pmem.io/pmdk/manpages/linux/v1.2/libpmem.3.html] > > > > > > Dave > > > > > > > > > > > BR > > > > Beata > > > > > > > > > > Dave > > > > > > > > > > > } > > > > > > > > > > > > xbzrle_load_cleanup(); > > > > > > -- > > > > > > 2.17.1 > > > > > > > > > > > -- > > > > > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK > > > -- > > > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK > -- > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
On 9/10/19 2:56 AM, Beata Michalska wrote: > Switch to ram block writeback for pmem migration. > > Signed-off-by: Beata Michalska <beata.michalska@linaro.org> > --- > migration/ram.c | 5 +---- > 1 file changed, 1 insertion(+), 4 deletions(-) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> r~
diff --git a/migration/ram.c b/migration/ram.c index b01a37e7ca..8ea0bd63fc 100644 --- a/migration/ram.c +++ b/migration/ram.c @@ -33,7 +33,6 @@ #include "qemu/bitops.h" #include "qemu/bitmap.h" #include "qemu/main-loop.h" -#include "qemu/pmem.h" #include "xbzrle.h" #include "ram.h" #include "migration.h" @@ -4064,9 +4063,7 @@ static int ram_load_cleanup(void *opaque) RAMBlock *rb; RAMBLOCK_FOREACH_NOT_IGNORED(rb) { - if (ramblock_is_pmem(rb)) { - pmem_persist(rb->host, rb->used_length); - } + qemu_ram_block_writeback(rb); } xbzrle_load_cleanup();
Switch to ram block writeback for pmem migration. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> --- migration/ram.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)