[PULL,23/48] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h}

Message ID	20190918145640.17349-24-palmer@sifive.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <SRS0=+Nm9=XN=nongnu.org=qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@kernel.org> DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 9B4C7207FC Date: Wed, 18 Sep 2019 07:56:15 -0700 Message-Id: <20190918145640.17349-24-palmer@sifive.com> In-Reply-To: <20190918145640.17349-1-palmer@sifive.com> References: <20190918145640.17349-1-palmer@sifive.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit From: Palmer Dabbelt <palmer@sifive.com> To: Peter Maydell <peter.maydell@linaro.org> Subject: [Qemu-devel] [PULL 23/48] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} Precedence: list Cc: qemu-riscv@nongnu.org, Palmer Dabbelt <palmer@sifive.com>, qemu-devel@nongnu.org, Chih-Min Chao <chihmin.chao@sifive.com>, Alistair Francis <alistair.francis@wdc.com>, Bin Meng <bmeng.cn@gmail.com> Errors-To: qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org Sender: "Qemu-devel" <qemu-devel-bounces+patchwork-qemu-devel=patchwork.kernel.org@nongnu.org>
Series	[PULL,01/48] riscv: sifive_u: Add support for loading initrd \| expand [PULL,01/48] riscv: sifive_u: Add support for loading initrd [PULL,02/48] riscv: sivive_u: Add dummy serial clock and aliases entry for uart [PULL,03/48] riscv: sifive_u: Fix clock-names property for ethernet node [PULL,04/48] target/riscv/pmp: Restrict priviledged PMP to system-mode emulation [PULL,05/48] target/riscv/pmp: Convert qemu_log_mask(LOG_TRACE) to trace events [PULL,06/48] riscv: plic: Remove unused interrupt functions [PULL,07/48] target/riscv: Create function to test if FP is enabled [PULL,08/48] target/riscv: Update the Hypervisor CSRs to v0.4 [PULL,09/48] riscv: rv32: Root page table address can be larger than 32-bit [PULL,10/48] riscv: Add a helper routine for finding firmware [PULL,11/48] riscv: Resolve full path of the given bios image [PULL,12/48] riscv: hmp: Add a command to show virtual memory mappings [PULL,13/48] riscv: sifive_test: Add reset functionality [PULL,14/48] riscv: hw: Remove duplicated "hw/hw.h" inclusion [PULL,15/48] riscv: hw: Remove superfluous "linux, phandle" property [PULL,16/48] riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cell [PULL,17/48] riscv: hw: Remove not needed PLIC properties in device tree [PULL,18/48] riscv: hw: Change create_fdt() to return void [PULL,19/48] riscv: hw: Change to use qemu_log_mask(LOG_GUEST_ERROR, ...) instead [PULL,20/48] riscv: hw: Remove the unnecessary include of target/riscv/cpu.h [PULL,21/48] riscv: roms: Remove executable attribute of opensbi images [PULL,22/48] riscv: sifive_u: Remove the unnecessary include of prci header [PULL,23/48] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h} [PULL,24/48] riscv: sifive_e: prci: Fix a typo of hfxosccfg register programming [PULL,25/48] riscv: sifive_e: prci: Update the PRCI register block size [PULL,26/48] riscv: sifive_e: Drop sifive_mmio_emulate() [PULL,27/48] riscv: Add a sifive_cpu.h to include both E and U cpu type defines [PULL,28/48] riscv: hart: Extract hart realize to a separate routine [PULL,29/48] riscv: hart: Add a "hartid-base" property to RISC-V hart array [PULL,30/48] riscv: sifive_u: Set the minimum number of cpus to 2 [PULL,31/48] riscv: sifive_u: Update hart configuration to reflect the real FU540 SoC [PULL,32/48] riscv: sifive_u: Update PLIC hart topology configuration string [PULL,33/48] riscv: sifive: Implement PRCI model for FU540 [PULL,34/48] riscv: sifive_u: Generate hfclk and rtcclk nodes [PULL,35/48] riscv: sifive_u: Add PRCI block to the SoC [PULL,36/48] riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodes [PULL,37/48] riscv: sifive_u: Update UART base addresses and IRQs [PULL,38/48] riscv: sifive_u: Change UART node name in device tree [PULL,39/48] riscv: roms: Update default bios for sifive_u machine [PULL,40/48] riscv: sifive: Implement a model for SiFive FU540 OTP [PULL,41/48] riscv: sifive_u: Instantiate OTP memory with a serial number [PULL,42/48] riscv: sifive_u: Fix broken GEM support [PULL,43/48] riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernet [PULL,44/48] riscv: sifive_u: Update model and compatible strings in device tree [PULL,45/48] target/riscv: Use both register name and ABI name [PULL,46/48] target/riscv: Fix mstatus dirty mask [PULL,47/48] target/riscv: Use TB_FLAGS_MSTATUS_FS for floating point [PULL,48/48] gdbstub: riscv: fix the fflags registers

diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs index eb9d4f9ffc..c8596977a8 100644 --- a/hw/riscv/Makefile.objs +++ b/hw/riscv/Makefile.objs @@ -2,9 +2,9 @@ obj-y += boot.o obj-$(CONFIG_SPIKE) += riscv_htif.o obj-$(CONFIG_HART) += riscv_hart.o obj-$(CONFIG_SIFIVE_E) += sifive_e.o +obj-$(CONFIG_SIFIVE_E) += sifive_e_prci.o obj-$(CONFIG_SIFIVE) += sifive_clint.o obj-$(CONFIG_SIFIVE) += sifive_gpio.o -obj-$(CONFIG_SIFIVE) += sifive_prci.o obj-$(CONFIG_SIFIVE) += sifive_plic.o obj-$(CONFIG_SIFIVE) += sifive_test.o obj-$(CONFIG_SIFIVE_U) += sifive_u.o diff --git a/hw/riscv/sifive_e.c b/hw/riscv/sifive_e.c index 792d75a1a3..1428a99fce 100644 --- a/hw/riscv/sifive_e.c +++ b/hw/riscv/sifive_e.c @@ -40,9 +40,9 @@ #include "hw/riscv/riscv_hart.h" #include "hw/riscv/sifive_plic.h" #include "hw/riscv/sifive_clint.h" -#include "hw/riscv/sifive_prci.h" #include "hw/riscv/sifive_uart.h" #include "hw/riscv/sifive_e.h" +#include "hw/riscv/sifive_e_prci.h" #include "hw/riscv/boot.h" #include "chardev/char.h" #include "sysemu/arch_init.h" @@ -174,7 +174,7 @@ static void riscv_sifive_e_soc_realize(DeviceState *dev, Error **errp) SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE); sifive_mmio_emulate(sys_mem, "riscv.sifive.e.aon", memmap[SIFIVE_E_AON].base, memmap[SIFIVE_E_AON].size); - sifive_prci_create(memmap[SIFIVE_E_PRCI].base); + sifive_e_prci_create(memmap[SIFIVE_E_PRCI].base); /* GPIO */ diff --git a/hw/riscv/sifive_prci.c b/hw/riscv/sifive_e_prci.c similarity index 51% rename from hw/riscv/sifive_prci.c rename to hw/riscv/sifive_e_prci.c index c413f0cb76..b6d32db935 100644 --- a/hw/riscv/sifive_prci.c +++ b/hw/riscv/sifive_e_prci.c @@ -1,5 +1,5 @@ /* - * QEMU SiFive PRCI (Power, Reset, Clock, Interrupt) + * QEMU SiFive E PRCI (Power, Reset, Clock, Interrupt) * * Copyright (c) 2017 SiFive, Inc. * @@ -23,19 +23,19 @@ #include "qemu/log.h" #include "qemu/module.h" #include "hw/hw.h" -#include "hw/riscv/sifive_prci.h" +#include "hw/riscv/sifive_e_prci.h" -static uint64_t sifive_prci_read(void *opaque, hwaddr addr, unsigned int size) +static uint64_t sifive_e_prci_read(void *opaque, hwaddr addr, unsigned int size) { - SiFivePRCIState *s = opaque; + SiFiveEPRCIState *s = opaque; switch (addr) { - case SIFIVE_PRCI_HFROSCCFG: + case SIFIVE_E_PRCI_HFROSCCFG: return s->hfrosccfg; - case SIFIVE_PRCI_HFXOSCCFG: + case SIFIVE_E_PRCI_HFXOSCCFG: return s->hfxosccfg; - case SIFIVE_PRCI_PLLCFG: + case SIFIVE_E_PRCI_PLLCFG: return s->pllcfg; - case SIFIVE_PRCI_PLLOUTDIV: + case SIFIVE_E_PRCI_PLLOUTDIV: return s->plloutdiv; } qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%x\n", @@ -43,27 +43,27 @@ static uint64_t sifive_prci_read(void *opaque, hwaddr addr, unsigned int size) return 0; } -static void sifive_prci_write(void *opaque, hwaddr addr, - uint64_t val64, unsigned int size) +static void sifive_e_prci_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) { - SiFivePRCIState *s = opaque; + SiFiveEPRCIState *s = opaque; switch (addr) { - case SIFIVE_PRCI_HFROSCCFG: + case SIFIVE_E_PRCI_HFROSCCFG: s->hfrosccfg = (uint32_t) val64; /* OSC stays ready */ - s->hfrosccfg |= SIFIVE_PRCI_HFROSCCFG_RDY; + s->hfrosccfg |= SIFIVE_E_PRCI_HFROSCCFG_RDY; break; - case SIFIVE_PRCI_HFXOSCCFG: + case SIFIVE_E_PRCI_HFXOSCCFG: s->hfxosccfg = (uint32_t) val64; /* OSC stays ready */ - s->hfxosccfg |= SIFIVE_PRCI_HFXOSCCFG_RDY; + s->hfxosccfg |= SIFIVE_E_PRCI_HFXOSCCFG_RDY; break; - case SIFIVE_PRCI_PLLCFG: + case SIFIVE_E_PRCI_PLLCFG: s->pllcfg = (uint32_t) val64; /* PLL stays locked */ - s->pllcfg |= SIFIVE_PRCI_PLLCFG_LOCK; + s->pllcfg |= SIFIVE_E_PRCI_PLLCFG_LOCK; break; - case SIFIVE_PRCI_PLLOUTDIV: + case SIFIVE_E_PRCI_PLLOUTDIV: s->plloutdiv = (uint32_t) val64; break; default: @@ -72,9 +72,9 @@ static void sifive_prci_write(void *opaque, hwaddr addr, } } -static const MemoryRegionOps sifive_prci_ops = { - .read = sifive_prci_read, - .write = sifive_prci_write, +static const MemoryRegionOps sifive_e_prci_ops = { + .read = sifive_e_prci_read, + .write = sifive_e_prci_write, .endianness = DEVICE_NATIVE_ENDIAN, .valid = { .min_access_size = 4, @@ -82,43 +82,42 @@ static const MemoryRegionOps sifive_prci_ops = { } }; -static void sifive_prci_init(Object *obj) +static void sifive_e_prci_init(Object *obj) { - SiFivePRCIState *s = SIFIVE_PRCI(obj); + SiFiveEPRCIState *s = SIFIVE_E_PRCI(obj); - memory_region_init_io(&s->mmio, obj, &sifive_prci_ops, s, - TYPE_SIFIVE_PRCI, 0x8000); + memory_region_init_io(&s->mmio, obj, &sifive_e_prci_ops, s, + TYPE_SIFIVE_E_PRCI, 0x8000); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); - s->hfrosccfg = (SIFIVE_PRCI_HFROSCCFG_RDY | SIFIVE_PRCI_HFROSCCFG_EN); - s->hfxosccfg = (SIFIVE_PRCI_HFROSCCFG_RDY | SIFIVE_PRCI_HFROSCCFG_EN); - s->pllcfg = (SIFIVE_PRCI_PLLCFG_REFSEL | SIFIVE_PRCI_PLLCFG_BYPASS | - SIFIVE_PRCI_PLLCFG_LOCK); - s->plloutdiv = SIFIVE_PRCI_PLLOUTDIV_DIV1; - + s->hfrosccfg = (SIFIVE_E_PRCI_HFROSCCFG_RDY | SIFIVE_E_PRCI_HFROSCCFG_EN); + s->hfxosccfg = (SIFIVE_E_PRCI_HFROSCCFG_RDY | SIFIVE_E_PRCI_HFROSCCFG_EN); + s->pllcfg = (SIFIVE_E_PRCI_PLLCFG_REFSEL | SIFIVE_E_PRCI_PLLCFG_BYPASS | + SIFIVE_E_PRCI_PLLCFG_LOCK); + s->plloutdiv = SIFIVE_E_PRCI_PLLOUTDIV_DIV1; } -static const TypeInfo sifive_prci_info = { - .name = TYPE_SIFIVE_PRCI, +static const TypeInfo sifive_e_prci_info = { + .name = TYPE_SIFIVE_E_PRCI, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(SiFivePRCIState), - .instance_init = sifive_prci_init, + .instance_size = sizeof(SiFiveEPRCIState), + .instance_init = sifive_e_prci_init, }; -static void sifive_prci_register_types(void) +static void sifive_e_prci_register_types(void) { - type_register_static(&sifive_prci_info); + type_register_static(&sifive_e_prci_info); } -type_init(sifive_prci_register_types) +type_init(sifive_e_prci_register_types) /* * Create PRCI device. */ -DeviceState *sifive_prci_create(hwaddr addr) +DeviceState *sifive_e_prci_create(hwaddr addr) { - DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_PRCI); + DeviceState *dev = qdev_create(NULL, TYPE_SIFIVE_E_PRCI); qdev_init_nofail(dev); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr); return dev; diff --git a/include/hw/riscv/sifive_e_prci.h b/include/hw/riscv/sifive_e_prci.h new file mode 100644 index 0000000000..c4b76aa17a --- /dev/null +++ b/include/hw/riscv/sifive_e_prci.h @@ -0,0 +1,69 @@ +/* + * QEMU SiFive E PRCI (Power, Reset, Clock, Interrupt) interface + * + * Copyright (c) 2017 SiFive, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_SIFIVE_E_PRCI_H +#define HW_SIFIVE_E_PRCI_H + +enum { + SIFIVE_E_PRCI_HFROSCCFG = 0x0, + SIFIVE_E_PRCI_HFXOSCCFG = 0x4, + SIFIVE_E_PRCI_PLLCFG = 0x8, + SIFIVE_E_PRCI_PLLOUTDIV = 0xC +}; + +enum { + SIFIVE_E_PRCI_HFROSCCFG_RDY = (1 << 31), + SIFIVE_E_PRCI_HFROSCCFG_EN = (1 << 30) +}; + +enum { + SIFIVE_E_PRCI_HFXOSCCFG_RDY = (1 << 31), + SIFIVE_E_PRCI_HFXOSCCFG_EN = (1 << 30) +}; + +enum { + SIFIVE_E_PRCI_PLLCFG_PLLSEL = (1 << 16), + SIFIVE_E_PRCI_PLLCFG_REFSEL = (1 << 17), + SIFIVE_E_PRCI_PLLCFG_BYPASS = (1 << 18), + SIFIVE_E_PRCI_PLLCFG_LOCK = (1 << 31) +}; + +enum { + SIFIVE_E_PRCI_PLLOUTDIV_DIV1 = (1 << 8) +}; + +#define TYPE_SIFIVE_E_PRCI "riscv.sifive.e.prci" + +#define SIFIVE_E_PRCI(obj) \ + OBJECT_CHECK(SiFiveEPRCIState, (obj), TYPE_SIFIVE_E_PRCI) + +typedef struct SiFiveEPRCIState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion mmio; + uint32_t hfrosccfg; + uint32_t hfxosccfg; + uint32_t pllcfg; + uint32_t plloutdiv; +} SiFiveEPRCIState; + +DeviceState *sifive_e_prci_create(hwaddr addr); + +#endif diff --git a/include/hw/riscv/sifive_prci.h b/include/hw/riscv/sifive_prci.h deleted file mode 100644 index 8b7de134f8..0000000000 --- a/include/hw/riscv/sifive_prci.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * QEMU SiFive PRCI (Power, Reset, Clock, Interrupt) interface - * - * Copyright (c) 2017 SiFive, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2 or later, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef HW_SIFIVE_PRCI_H -#define HW_SIFIVE_PRCI_H - -#include "hw/sysbus.h" - -enum { - SIFIVE_PRCI_HFROSCCFG = 0x0, - SIFIVE_PRCI_HFXOSCCFG = 0x4, - SIFIVE_PRCI_PLLCFG = 0x8, - SIFIVE_PRCI_PLLOUTDIV = 0xC -}; - -enum { - SIFIVE_PRCI_HFROSCCFG_RDY = (1 << 31), - SIFIVE_PRCI_HFROSCCFG_EN = (1 << 30) -}; - -enum { - SIFIVE_PRCI_HFXOSCCFG_RDY = (1 << 31), - SIFIVE_PRCI_HFXOSCCFG_EN = (1 << 30) -}; - -enum { - SIFIVE_PRCI_PLLCFG_PLLSEL = (1 << 16), - SIFIVE_PRCI_PLLCFG_REFSEL = (1 << 17), - SIFIVE_PRCI_PLLCFG_BYPASS = (1 << 18), - SIFIVE_PRCI_PLLCFG_LOCK = (1 << 31) -}; - -enum { - SIFIVE_PRCI_PLLOUTDIV_DIV1 = (1 << 8) -}; - -#define TYPE_SIFIVE_PRCI "riscv.sifive.prci" - -#define SIFIVE_PRCI(obj) \ - OBJECT_CHECK(SiFivePRCIState, (obj), TYPE_SIFIVE_PRCI) - -typedef struct SiFivePRCIState { - /*< private >*/ - SysBusDevice parent_obj; - - /*< public >*/ - MemoryRegion mmio; - uint32_t hfrosccfg; - uint32_t hfxosccfg; - uint32_t pllcfg; - uint32_t plloutdiv; -} SiFivePRCIState; - -DeviceState *sifive_prci_create(hwaddr addr); - -#endif

[PULL,23/48] riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h}

Commit Message

Patch