@@ -4,4 +4,4 @@ common-obj-$(CONFIG_WDT_IB6300ESB) += wdt_i6300esb.o
common-obj-$(CONFIG_WDT_IB700) += wdt_ib700.o
common-obj-$(CONFIG_WDT_DIAG288) += wdt_diag288.o
common-obj-$(CONFIG_ASPEED_SOC) += wdt_aspeed.o
-common-obj-$(CONFIG_WDT_IMX) += wdt_imx2.o
+common-obj-$(CONFIG_WDT_IMX2) += wdt_imx2.o
@@ -13,24 +13,157 @@
#include "qemu/bitops.h"
#include "qemu/module.h"
#include "sysemu/watchdog.h"
+#include "migration/vmstate.h"
+#include "hw/qdev-properties.h"
#include "hw/watchdog/wdt_imx2.h"
-#define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */
-#define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */
+static void imx2_wdt_interrupt(void *opaque)
+{
+ IMX2WdtState *s = IMX2_WDT(opaque);
+
+ s->wicr |= IMX2_WDT_WICR_WTIS;
+ qemu_set_irq(s->irq, 1);
+}
-static uint64_t imx2_wdt_read(void *opaque, hwaddr addr,
- unsigned int size)
+static void imx2_wdt_expired(void *opaque)
{
+ IMX2WdtState *s = IMX2_WDT(opaque);
+
+ s->wrsr = IMX2_WDT_WRSR_TOUT;
+
+ /* Perform watchdog action if watchdog is enabled */
+ if (s->wcr & IMX2_WDT_WCR_WDE) {
+ watchdog_perform_action();
+ }
+}
+
+static void imx2_wdt_reset(DeviceState *dev)
+{
+ IMX2WdtState *s = IMX2_WDT(dev);
+
+ s->wcr = IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS;
+ s->wsr = 0;
+ s->wrsr &= ~(IMX2_WDT_WRSR_TOUT | IMX2_WDT_WRSR_SFTW);
+ s->wicr = 4;
+ s->wmcr = IMX2_WDT_WMCR_PDE;
+}
+
+static uint64_t imx2_wdt_read(void *opaque, hwaddr addr, unsigned int size)
+{
+ IMX2WdtState *s = IMX2_WDT(opaque);
+
+ switch (addr) {
+ case IMX2_WDT_WCR:
+ return s->wcr;
+ case IMX2_WDT_WSR:
+ return s->wsr;
+ case IMX2_WDT_WRSR:
+ return s->wrsr;
+ case IMX2_WDT_WICR:
+ return s->wicr;
+ case IMX2_WDT_WMCR:
+ return s->wmcr;
+ }
return 0;
}
+static void imx_wdt2_update_itimer(IMX2WdtState *s, bool start)
+{
+ bool running = (s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT);
+ bool enabled = s->wicr & IMX2_WDT_WICR_WIE;
+
+ ptimer_transaction_begin(s->itimer);
+ if (start || !enabled) {
+ ptimer_stop(s->itimer);
+ }
+ if (running && enabled) {
+ int count = ptimer_get_count(s->timer);
+ int pretimeout = s->wicr & IMX2_WDT_WICR_WICT;
+
+ /*
+ * Only (re-)start pretimeout timer if its counter value is larger
+ * than 0. Otherwise it will fire right away and we'll get an
+ * interrupt loop.
+ */
+ if (count > pretimeout) {
+ ptimer_set_count(s->itimer, count - pretimeout);
+ if (start) {
+ ptimer_run(s->itimer, 1);
+ }
+ }
+ }
+ ptimer_transaction_commit(s->itimer);
+}
+
+static void imx_wdt2_update_timer(IMX2WdtState *s, bool start)
+{
+ ptimer_transaction_begin(s->timer);
+ if (start) {
+ ptimer_stop(s->timer);
+ }
+ if ((s->wcr & IMX2_WDT_WCR_WDE) && (s->wcr & IMX2_WDT_WCR_WT)) {
+ int count = (s->wcr & IMX2_WDT_WCR_WT) >> 8;
+
+ ptimer_set_count(s->timer, count);
+ if (start) {
+ ptimer_run(s->timer, 1);
+ }
+ }
+ ptimer_transaction_commit(s->timer);
+ if (s->pretimeout_support) {
+ imx_wdt2_update_itimer(s, start);
+ }
+}
+
static void imx2_wdt_write(void *opaque, hwaddr addr,
uint64_t value, unsigned int size)
{
- if (addr == IMX2_WDT_WCR &&
- (~value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS))) {
- watchdog_perform_action();
+ IMX2WdtState *s = IMX2_WDT(opaque);
+
+ switch (addr) {
+ case IMX2_WDT_WCR:
+ s->wcr = value;
+ if (!(value & IMX2_WDT_WCR_SRS)) {
+ s->wrsr = IMX2_WDT_WRSR_SFTW;
+ }
+ if (!(value & (IMX2_WDT_WCR_WDA | IMX2_WDT_WCR_SRS)) ||
+ (!(value & IMX2_WDT_WCR_WT) && (value & IMX2_WDT_WCR_WDE))) {
+ watchdog_perform_action();
+ }
+ s->wcr |= IMX2_WDT_WCR_SRS;
+ imx_wdt2_update_timer(s, true);
+ break;
+ case IMX2_WDT_WSR:
+ if (s->wsr == IMX2_WDT_SEQ1 && value == IMX2_WDT_SEQ2) {
+ imx_wdt2_update_timer(s, false);
+ }
+ s->wsr = value;
+ break;
+ case IMX2_WDT_WRSR:
+ break;
+ case IMX2_WDT_WICR:
+ if (!s->pretimeout_support) {
+ return;
+ }
+ /* The pretimeout value is write-once */
+ if (s->pretimeout_locked) {
+ value &= ~IMX2_WDT_WICR_WICT;
+ s->wicr &= (IMX2_WDT_WICR_WTIS | IMX2_WDT_WICR_WICT);
+ } else {
+ s->wicr &= IMX2_WDT_WICR_WTIS;
+ }
+ s->wicr |= value & (IMX2_WDT_WICR_WIE | IMX2_WDT_WICR_WICT);
+ if (value & IMX2_WDT_WICR_WTIS) {
+ s->wicr &= ~IMX2_WDT_WICR_WTIS;
+ qemu_set_irq(s->irq, 0);
+ }
+ imx_wdt2_update_itimer(s, true);
+ s->pretimeout_locked = true;
+ break;
+ case IMX2_WDT_WMCR:
+ s->wmcr = value & IMX2_WDT_WMCR_PDE;
+ break;
}
}
@@ -45,28 +178,67 @@ static const MemoryRegionOps imx2_wdt_ops = {
* real device but in practice there is no reason for a guest
* to access this device unaligned.
*/
- .min_access_size = 4,
- .max_access_size = 4,
+ .min_access_size = 2,
+ .max_access_size = 2,
.unaligned = false,
},
};
+static const VMStateDescription vmstate_imx2_wdt = {
+ .name = "imx2.wdt",
+ .fields = (VMStateField[]) {
+ VMSTATE_PTIMER(timer, IMX2WdtState),
+ VMSTATE_PTIMER(itimer, IMX2WdtState),
+ VMSTATE_BOOL(pretimeout_locked, IMX2WdtState),
+ VMSTATE_UINT16(wcr, IMX2WdtState),
+ VMSTATE_UINT16(wsr, IMX2WdtState),
+ VMSTATE_UINT16(wrsr, IMX2WdtState),
+ VMSTATE_UINT16(wmcr, IMX2WdtState),
+ VMSTATE_UINT16(wicr, IMX2WdtState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void imx2_wdt_realize(DeviceState *dev, Error **errp)
{
IMX2WdtState *s = IMX2_WDT(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
memory_region_init_io(&s->mmio, OBJECT(dev),
&imx2_wdt_ops, s,
- TYPE_IMX2_WDT".mmio",
- IMX2_WDT_REG_NUM * sizeof(uint16_t));
- sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
+ TYPE_IMX2_WDT,
+ IMX2_WDT_MMIO_SIZE);
+ sysbus_init_mmio(sbd, &s->mmio);
+ sysbus_init_irq(sbd, &s->irq);
+
+ s->timer = ptimer_init(imx2_wdt_expired, s, PTIMER_POLICY_DEFAULT);
+ ptimer_transaction_begin(s->timer);
+ ptimer_set_freq(s->timer, 2);
+ ptimer_set_limit(s->timer, 0xff, 1);
+ ptimer_transaction_commit(s->timer);
+ if (s->pretimeout_support) {
+ s->itimer = ptimer_init(imx2_wdt_interrupt, s, PTIMER_POLICY_DEFAULT);
+ ptimer_transaction_begin(s->itimer);
+ ptimer_set_freq(s->itimer, 2);
+ ptimer_set_limit(s->itimer, 0xff, 1);
+ ptimer_transaction_commit(s->itimer);
+ }
}
+static Property imx2_wdt_properties[] = {
+ DEFINE_PROP_BOOL("pretimeout-support", IMX2WdtState, pretimeout_support,
+ false),
+};
+
static void imx2_wdt_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ device_class_set_props(dc, imx2_wdt_properties);
dc->realize = imx2_wdt_realize;
+ dc->reset = imx2_wdt_reset;
+ dc->vmsd = &vmstate_imx2_wdt;
+ dc->desc = "i.MX watchdog timer";
set_bit(DEVICE_CATEGORY_MISC, dc->categories);
}
@@ -12,22 +12,67 @@
#ifndef IMX2_WDT_H
#define IMX2_WDT_H
+#include "qemu/bitops.h"
#include "hw/sysbus.h"
+#include "hw/irq.h"
+#include "hw/ptimer.h"
#define TYPE_IMX2_WDT "imx2.wdt"
#define IMX2_WDT(obj) OBJECT_CHECK(IMX2WdtState, (obj), TYPE_IMX2_WDT)
enum IMX2WdtRegisters {
- IMX2_WDT_WCR = 0x0000,
- IMX2_WDT_REG_NUM = 0x0008 / sizeof(uint16_t) + 1,
+ IMX2_WDT_WCR = 0x0000, /* Control Register */
+ IMX2_WDT_WSR = 0x0002, /* Service Register */
+ IMX2_WDT_WRSR = 0x0004, /* Reset Status Register */
+ IMX2_WDT_WICR = 0x0006, /* Interrupt Control Register */
+ IMX2_WDT_WMCR = 0x0008, /* Misc Register */
};
+#define IMX2_WDT_MMIO_SIZE 0x000a
+
+/* Control Register definitions */
+#define IMX2_WDT_WCR_WT (0xFF << 8) /* Watchdog Timeout Field */
+#define IMX2_WDT_WCR_WDA BIT(5) /* WDOG Assertion */
+#define IMX2_WDT_WCR_SRS BIT(4) /* Software Reset Signal */
+#define IMX2_WDT_WCR_WDT BIT(3) /* WDOG Timeout Assertion */
+#define IMX2_WDT_WCR_WDE BIT(2) /* Watchdog Enable */
+#define IMX2_WDT_WCR_WDZST BIT(0) /* Watchdog Timer Suspend */
+
+/* Service Register definitions */
+#define IMX2_WDT_SEQ1 0x5555 /* service sequence 1 */
+#define IMX2_WDT_SEQ2 0xAAAA /* service sequence 2 */
+
+/* Reset Status Register definitions */
+#define IMX2_WDT_WRSR_TOUT BIT(1) /* Reset due to Timeout */
+#define IMX2_WDT_WRSR_SFTW BIT(0) /* Reset due to Timeout */
+
+/* Interrupt Control Register definitions */
+#define IMX2_WDT_WICR_WIE BIT(15) /* Interrupt Enable */
+#define IMX2_WDT_WICR_WTIS BIT(14) /* Interrupt Status */
+#define IMX2_WDT_WICR_WICT 0xff /* Interrupt Timeout */
+
+/* Misc Control Register definitions */
+#define IMX2_WDT_WMCR_PDE BIT(0) /* Power-Down Enable */
typedef struct IMX2WdtState {
/* <private> */
SysBusDevice parent_obj;
+ /*< public >*/
MemoryRegion mmio;
+ qemu_irq irq;
+
+ struct ptimer_state *timer;
+ struct ptimer_state *itimer;
+
+ bool pretimeout_support;
+ bool pretimeout_locked;
+
+ uint16_t wcr;
+ uint16_t wsr;
+ uint16_t wrsr;
+ uint16_t wicr;
+ uint16_t wmcr;
} IMX2WdtState;
#endif /* IMX2_WDT_H */
Implement full support for the watchdog in i.MX systems. Pretimeout support is optional because the watchdog hardware on i.MX31 does not support pretimeouts. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- hw/watchdog/Makefile.objs | 2 +- hw/watchdog/wdt_imx2.c | 196 +++++++++++++++++++++++++++++++-- include/hw/watchdog/wdt_imx2.h | 49 ++++++++- 3 files changed, 232 insertions(+), 15 deletions(-)