@@ -47,14 +47,6 @@
#include "migration/vmstate.h"
#include "trace.h"
-#define PFLASH_DEBUG false
-#define DPRINTF(fmt, ...) \
-do { \
- if (PFLASH_DEBUG) { \
- fprintf(stderr, "PFLASH: " fmt, ## __VA_ARGS__); \
- } \
-} while (0)
-
#define PFLASH_LAZY_ROMD_THRESHOLD 42
/*
@@ -232,11 +224,10 @@ static void pflash_timer(void *opaque)
uint64_t timeout = pflash_erase_time(pfl);
timer_mod(&pfl->timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout);
- DPRINTF("%s: erase timeout fired; erasing %d sectors\n",
- __func__, pfl->sectors_to_erase);
+ trace_pflash_sector_erase_timeout(pfl->sectors_to_erase);
return;
}
- DPRINTF("%s: sector erase complete\n", __func__);
+ trace_pflash_sector_erase_complete();
bitmap_zero(pfl->sector_erase_map, pfl->total_sectors);
pfl->sectors_to_erase = 0;
reset_dq3(pfl);
@@ -324,7 +315,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
switch (pfl->cmd) {
default:
/* This should never happen : reset state & treat it as a read*/
- DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
+ trace_pflash_unknown_command_state(pfl->cmd);
pfl->wcycle = 0;
pfl->cmd = 0;
/* fall through to the read code */
@@ -337,7 +328,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
toggle_dq2(pfl);
/* Status register read */
ret = pfl->status;
- DPRINTF("%s: status %" PRIx64 "\n", __func__, ret);
+ trace_pflash_status(ret);
break;
}
/* Flash area read */
@@ -362,7 +353,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
default:
ret = pflash_data_read(pfl, offset, width);
}
- DPRINTF("%s: ID " TARGET_FMT_plx " %" PRIx64 "\n", __func__, boff, ret);
+ trace_pflash_flash_id(boff, ret);
break;
case 0x10: /* Chip Erase */
case 0x30: /* Sector Erase */
@@ -374,7 +365,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
toggle_dq6(pfl);
/* Status register read */
ret = pfl->status;
- DPRINTF("%s: status %" PRIx64 "\n", __func__, ret);
+ trace_pflash_status(ret);
break;
case 0x98:
/* CFI query mode */
@@ -414,9 +405,7 @@ static void pflash_sector_erase(PFlashCFI02 *pfl, hwaddr offset)
SectorInfo sector_info = pflash_sector_info(pfl, offset);
uint64_t sector_len = sector_info.len;
offset &= ~(sector_len - 1);
- DPRINTF("%s: start sector erase at %0*" PRIx64 "-%0*" PRIx64 "\n",
- __func__, pfl->width * 2, offset,
- pfl->width * 2, offset + sector_len - 1);
+ trace_pflash_sector_erase_start(offset, offset + sector_len - 1);
if (!pfl->ro) {
uint8_t *p = pfl->storage;
memset(p + offset, 0xff, sector_len);
@@ -495,27 +484,24 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
return;
}
if (boff != pfl->unlock_addr0 || cmd != 0xAA) {
- DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n",
- __func__, boff, cmd, pfl->unlock_addr0);
+ trace_pflash_unlock0_failed(boff, cmd, pfl->unlock_addr0);
goto reset_flash;
}
- DPRINTF("%s: unlock sequence started\n", __func__);
+ trace_pflash_unlock_sequence_started();
break;
case 1:
/* We started an unlock sequence */
check_unlock1:
if (boff != pfl->unlock_addr1 || cmd != 0x55) {
- DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__,
- boff, cmd);
+ trace_pflash_unlock1_failed(boff, cmd, pfl->unlock_addr1);
goto reset_flash;
}
- DPRINTF("%s: unlock sequence done\n", __func__);
+ trace_pflash_unlock_sequence_done();
break;
case 2:
/* We finished an unlock sequence */
if (!pfl->bypass && boff != pfl->unlock_addr0) {
- DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__,
- boff, cmd);
+ trace_pflash_command_failed(boff, cmd);
goto reset_flash;
}
switch (cmd) {
@@ -526,10 +512,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
case 0x90: /* Autoselect */
case 0xA0: /* Program */
pfl->cmd = cmd;
- DPRINTF("%s: starting command %02x\n", __func__, cmd);
+ trace_pflash_command_starting(cmd);
break;
default:
- DPRINTF("%s: unknown command %02x\n", __func__, cmd);
+ trace_pflash_command_unknown(cmd);
goto reset_flash;
}
break;
@@ -585,8 +571,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
}
/* fall through */
default:
- DPRINTF("%s: invalid write for command %02x\n",
- __func__, pfl->cmd);
+ trace_pflash_invalid_write_state(pfl->cmd, 3);
goto reset_flash;
}
case 4:
@@ -599,8 +584,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
goto check_unlock1;
default:
/* Should never happen */
- DPRINTF("%s: invalid command state %02x (wc 4)\n",
- __func__, pfl->cmd);
+ trace_pflash_invalid_command_state(pfl->cmd, 4);
goto reset_flash;
}
break;
@@ -612,12 +596,11 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
switch (cmd) {
case 0x10: /* Chip Erase */
if (boff != pfl->unlock_addr0) {
- DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n",
- __func__, offset);
+ trace_pflash_invalid_erase_adddress(offset);
goto reset_flash;
}
/* Chip erase */
- DPRINTF("%s: start chip erase\n", __func__);
+ trace_pflash_chip_erase_start();
if (!pfl->ro) {
memset(pfl->storage, 0xff, pfl->chip_len);
pflash_update(pfl, 0, pfl->chip_len);
@@ -631,7 +614,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
pflash_sector_erase(pfl, offset);
break;
default:
- DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
+ trace_pflash_invalid_command_state(pfl->cmd, 5);
goto reset_flash;
}
pfl->cmd = cmd;
@@ -682,19 +665,18 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
return;
default:
/* Should never happen */
- DPRINTF("%s: invalid command state %02x (wc 6)\n",
- __func__, pfl->cmd);
+ trace_pflash_invalid_command_state(pfl->cmd, 6);
goto reset_flash;
}
break;
/* Special values for CFI queries */
case WCYCLE_CFI:
case WCYCLE_AUTOSELECT_CFI:
- DPRINTF("%s: invalid write in CFI query mode\n", __func__);
+ trace_pflash_invalid_write_query();
goto reset_flash;
default:
/* Should never happen */
- DPRINTF("%s: invalid write state (wc 7)\n", __func__);
+ trace_pflash_invalid_write_state(pfl->cmd, pfl->wcycle);
goto reset_flash;
}
pfl->wcycle++;
@@ -15,6 +15,24 @@ pflash_data_write(uint64_t offset, unsigned size, uint32_t value, uint64_t count
pflash_manufacturer_id(uint16_t id) "Read Manufacturer ID: 0x%04x"
pflash_device_id(uint16_t id) "Read Device ID: 0x%04x"
pflash_device_info(uint64_t offset) "Read Device Information offset:0x%04"PRIx64
+pflash_sector_erase_timeout(int sectors) "sector erase timeout fired; erasing %d sectors"
+pflash_sector_erase_complete(void) "sector erase complete"
+pflash_unknown_command_state(uint8_t cmd) "unknown command state: 0x%02x"
+pflash_status(uint64_t status) "status 0x%" PRIx64
+pflash_flash_id(uint64_t boff, uint64_t id) "ID 0x%" PRIx64 " 0x%" PRIx64
+pflash_sector_erase_start(uint64_t start, uint64_t end) "start sector erase at 0x%"PRIx64"-0x%"PRIx64
+pflash_unlock0_failed(uint64_t addr, uint8_t cmd, uint16_t expected) "unlock0 failed 0x%" PRIx64 " %02x %04x"
+pflash_unlock_sequence_started(void) "unlock sequence started"
+pflash_unlock1_failed(uint64_t addr, uint8_t cmd, uint16_t expected) "unlock0 failed 0x%" PRIx64 " %02x %04x"
+pflash_unlock_sequence_done(void) "unlock sequence done"
+pflash_command_failed(uint64_t addr, uint8_t cmd) "command failed addr 0x%" PRIx64 " cmd 0x%02x"
+pflash_command_starting(uint8_t cmd) "starting command 0x%02x"
+pflash_command_unknown(uint8_t cmd) "unknown command 0x%02x"
+pflash_invalid_write_state(uint8_t cmd, int state) "invalid write for command 0x%02x (wc %d)"
+pflash_invalid_command_state(uint8_t cmd, int state) "invalid command state 0x%02x (wc %d)"
+pflash_invalid_erase_adddress(uint64_t addr) "chip erase: invalid address 0x%" PRIx64
+pflash_chip_erase_start(void) "start chip erase"
+pflash_invalid_write_query(void) "invalid write in CFI query mode"
# virtio-blk.c
virtio_blk_req_complete(void *vdev, void *req, int status) "vdev %p req %p status %d"
When trying to track down problems such as failing unlock sequences it is essential to have a complete trace log. Having part of it as debug output and the rest as trace output is counter-productive. Convert all debug logs to tracing. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- hw/block/pflash_cfi02.c | 62 +++++++++++++++-------------------------- hw/block/trace-events | 18 ++++++++++++ 2 files changed, 40 insertions(+), 40 deletions(-)