| Message ID | 20200818215227.181654-3-jusual@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Use ACPI PCI hot-plug for q35 | expand |
Hi Julia, On 8/18/20 11:52 PM, Julia Suvorova wrote: > Implement notifications and gpe to support q35 ACPI PCI hot-plug. > Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports. > > Signed-off-by: Julia Suvorova <jusual@redhat.com> > --- > include/hw/acpi/pcihp.h | 3 ++- > hw/acpi/pcihp.c | 10 ++++++---- > hw/acpi/piix4.c | 2 +- > hw/i386/acpi-build.c | 25 ++++++++++++++----------- > 4 files changed, 23 insertions(+), 17 deletions(-) > > diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h > index 8bc4a4c01d..1e9d246f57 100644 > --- a/include/hw/acpi/pcihp.h > +++ b/include/hw/acpi/pcihp.h > @@ -54,7 +54,8 @@ typedef struct AcpiPciHpState { > } AcpiPciHpState; > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root, > - MemoryRegion *address_space_io, bool bridges_enabled); > + MemoryRegion *address_space_io, bool bridges_enabled, > + bool is_piix4); > > void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev, > DeviceState *dev, Error **errp); > diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c > index 9e31ab2da4..9a35ed6c83 100644 > --- a/hw/acpi/pcihp.c > +++ b/hw/acpi/pcihp.c > @@ -38,7 +38,8 @@ > #include "qom/qom-qobject.h" > #include "trace.h" > > -#define ACPI_PCIHP_ADDR 0xae00 > +#define ACPI_PCIHP_ADDR_PIIX4 0xae00 > +#define ACPI_PCIHP_ADDR_Q35 0x0cc4 > #define ACPI_PCIHP_SIZE 0x0014 > #define PCI_UP_BASE 0x0000 > #define PCI_DOWN_BASE 0x0004 > @@ -359,12 +360,13 @@ static const MemoryRegionOps acpi_pcihp_io_ops = { > }; > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *s, PCIBus *root_bus, > - MemoryRegion *address_space_io, bool bridges_enabled) > + MemoryRegion *address_space_io, bool bridges_enabled, > + bool is_piix4) Instead of adding implementation knowledge to this generic function, can you instead pass it a 'io_base' argument (or 'pcihp_addr')? > { > s->io_len = ACPI_PCIHP_SIZE; > - s->io_base = ACPI_PCIHP_ADDR; > + s->io_base = is_piix4 ? ACPI_PCIHP_ADDR_PIIX4 : ACPI_PCIHP_ADDR_Q35; > > - s->root= root_bus; > + s->root = root_bus; > s->legacy_piix = !bridges_enabled; > > memory_region_init_io(&s->io, owner, &acpi_pcihp_io_ops, s, > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > index cdfa0e2998..1f27bfbd06 100644 > --- a/hw/acpi/piix4.c > +++ b/hw/acpi/piix4.c > @@ -596,7 +596,7 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > - s->use_acpi_hotplug_bridge); > + s->use_acpi_hotplug_bridge, true); > > s->cpu_hotplug_legacy = true; > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > index b7bcbbbb2a..f3cd52bd06 100644 > --- a/hw/i386/acpi-build.c > +++ b/hw/i386/acpi-build.c > @@ -201,10 +201,6 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */ > pm->fadt.rev = 1; > pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE; > - pm->pcihp_io_base = > - object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > - pm->pcihp_io_len = > - object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > } > if (lpc) { > struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO, > @@ -214,6 +210,10 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP; > pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE; > } > + pm->pcihp_io_base = > + object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > + pm->pcihp_io_len = > + object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > > /* The above need not be conditional on machine type because the reset port > * happens to be the same on PIIX (pc) and ICH9 (q35). */ > @@ -472,7 +472,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > QLIST_FOREACH(sec, &bus->child, sibling) { > int32_t devfn = sec->parent_dev->devfn; > > - if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) { > + if (pci_bus_is_root(sec)) { Different patch? > continue; > } > > @@ -1368,7 +1368,7 @@ static void build_piix4_isa_bridge(Aml *table) > aml_append(table, scope); > } > > -static void build_piix4_pci_hotplug(Aml *table) > +static void build_i386_pci_hotplug(Aml *table, uint64_t pcihp_addr) Being common to 32/64-bit, I'd name that build_x86_pci_hotplug(). > { > Aml *scope; > Aml *field; > @@ -1377,20 +1377,22 @@ static void build_piix4_pci_hotplug(Aml *table) > scope = aml_scope("_SB.PCI0"); > > aml_append(scope, > - aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08)); > + aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(pcihp_addr), 0x08)); > field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > aml_append(field, aml_named_field("PCIU", 32)); > aml_append(field, aml_named_field("PCID", 32)); > aml_append(scope, field); > > aml_append(scope, > - aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04)); > + aml_operation_region("SEJ", AML_SYSTEM_IO, > + aml_int(pcihp_addr + 0x08), 0x04)); > field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > aml_append(field, aml_named_field("B0EJ", 32)); > aml_append(scope, field); > > aml_append(scope, > - aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04)); > + aml_operation_region("BNMR", AML_SYSTEM_IO, > + aml_int(pcihp_addr + 0x10), 0x04)); > field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > aml_append(field, aml_named_field("BNUM", 32)); > aml_append(scope, field); > @@ -1504,7 +1506,6 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > build_hpet_aml(dsdt); > build_piix4_isa_bridge(dsdt); > build_isa_devices_aml(dsdt); > - build_piix4_pci_hotplug(dsdt); > build_piix4_pci0_int(dsdt); > } else { > sb_scope = aml_scope("_SB"); > @@ -1526,6 +1527,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > } > } > > + build_i386_pci_hotplug(dsdt, pm->pcihp_io_base); > + > if (pcmc->legacy_cpu_hotplug) { > build_legacy_cpu_hotplug_aml(dsdt, machine, pm->cpu_hp_io_base); > } else { > @@ -1546,7 +1549,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > { > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > - if (misc->is_piix4) { > + if (misc->is_piix4 || pm->pcihp_bridge_en) { Why not directly check 'if (pm->pcihp_bridge_en) {'? > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > aml_append(method, > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); > Regards, Phil.
On Tue, 18 Aug 2020 23:52:25 +0200 Julia Suvorova <jusual@redhat.com> wrote: > Implement notifications and gpe to support q35 ACPI PCI hot-plug. > Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports. in addition to comment from Philippe > > Signed-off-by: Julia Suvorova <jusual@redhat.com> > --- > include/hw/acpi/pcihp.h | 3 ++- > hw/acpi/pcihp.c | 10 ++++++---- > hw/acpi/piix4.c | 2 +- > hw/i386/acpi-build.c | 25 ++++++++++++++----------- > 4 files changed, 23 insertions(+), 17 deletions(-) > > diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h > index 8bc4a4c01d..1e9d246f57 100644 > --- a/include/hw/acpi/pcihp.h > +++ b/include/hw/acpi/pcihp.h > @@ -54,7 +54,8 @@ typedef struct AcpiPciHpState { > } AcpiPciHpState; > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root, > - MemoryRegion *address_space_io, bool bridges_enabled); > + MemoryRegion *address_space_io, bool bridges_enabled, > + bool is_piix4); > > void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev, > DeviceState *dev, Error **errp); > diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c > index 9e31ab2da4..9a35ed6c83 100644 > --- a/hw/acpi/pcihp.c > +++ b/hw/acpi/pcihp.c > @@ -38,7 +38,8 @@ > #include "qom/qom-qobject.h" > #include "trace.h" > > -#define ACPI_PCIHP_ADDR 0xae00 > +#define ACPI_PCIHP_ADDR_PIIX4 0xae00 > +#define ACPI_PCIHP_ADDR_Q35 0x0cc4 > #define ACPI_PCIHP_SIZE 0x0014 > #define PCI_UP_BASE 0x0000 > #define PCI_DOWN_BASE 0x0004 > @@ -359,12 +360,13 @@ static const MemoryRegionOps acpi_pcihp_io_ops = { > }; > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *s, PCIBus *root_bus, > - MemoryRegion *address_space_io, bool bridges_enabled) > + MemoryRegion *address_space_io, bool bridges_enabled, > + bool is_piix4) > { > s->io_len = ACPI_PCIHP_SIZE; > - s->io_base = ACPI_PCIHP_ADDR; > + s->io_base = is_piix4 ? ACPI_PCIHP_ADDR_PIIX4 : ACPI_PCIHP_ADDR_Q35; > > - s->root= root_bus; > + s->root = root_bus; > s->legacy_piix = !bridges_enabled; > > memory_region_init_io(&s->io, owner, &acpi_pcihp_io_ops, s, > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > index cdfa0e2998..1f27bfbd06 100644 > --- a/hw/acpi/piix4.c > +++ b/hw/acpi/piix4.c > @@ -596,7 +596,7 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > - s->use_acpi_hotplug_bridge); > + s->use_acpi_hotplug_bridge, true); > > s->cpu_hotplug_legacy = true; > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > index b7bcbbbb2a..f3cd52bd06 100644 > --- a/hw/i386/acpi-build.c > +++ b/hw/i386/acpi-build.c > @@ -201,10 +201,6 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */ > pm->fadt.rev = 1; > pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE; > - pm->pcihp_io_base = > - object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > - pm->pcihp_io_len = > - object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > } > if (lpc) { > struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO, > @@ -214,6 +210,10 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP; > pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE; > } > + pm->pcihp_io_base = > + object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > + pm->pcihp_io_len = > + object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > > /* The above need not be conditional on machine type because the reset port > * happens to be the same on PIIX (pc) and ICH9 (q35). */ > @@ -472,7 +472,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > QLIST_FOREACH(sec, &bus->child, sibling) { > int32_t devfn = sec->parent_dev->devfn; > > - if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) { > + if (pci_bus_is_root(sec)) { Does pcie bus on hostbridge fall into pci_bus_is_express() categiry or not? > continue; > } > > @@ -1368,7 +1368,7 @@ static void build_piix4_isa_bridge(Aml *table) > aml_append(table, scope); > } > > -static void build_piix4_pci_hotplug(Aml *table) > +static void build_i386_pci_hotplug(Aml *table, uint64_t pcihp_addr) > { > Aml *scope; > Aml *field; > @@ -1377,20 +1377,22 @@ static void build_piix4_pci_hotplug(Aml *table) > scope = aml_scope("_SB.PCI0"); > > aml_append(scope, > - aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08)); > + aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(pcihp_addr), 0x08)); > field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > aml_append(field, aml_named_field("PCIU", 32)); > aml_append(field, aml_named_field("PCID", 32)); > aml_append(scope, field); > > aml_append(scope, > - aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04)); > + aml_operation_region("SEJ", AML_SYSTEM_IO, > + aml_int(pcihp_addr + 0x08), 0x04)); ^^^^ how about turning this offset into macro? > field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > aml_append(field, aml_named_field("B0EJ", 32)); > aml_append(scope, field); > > aml_append(scope, > - aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04)); > + aml_operation_region("BNMR", AML_SYSTEM_IO, > + aml_int(pcihp_addr + 0x10), 0x04)); ditto > field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > aml_append(field, aml_named_field("BNUM", 32)); > aml_append(scope, field); > @@ -1504,7 +1506,6 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > build_hpet_aml(dsdt); > build_piix4_isa_bridge(dsdt); > build_isa_devices_aml(dsdt); > - build_piix4_pci_hotplug(dsdt); > build_piix4_pci0_int(dsdt); > } else { > sb_scope = aml_scope("_SB"); > @@ -1526,6 +1527,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > } > } > > + build_i386_pci_hotplug(dsdt, pm->pcihp_io_base); > + > if (pcmc->legacy_cpu_hotplug) { > build_legacy_cpu_hotplug_aml(dsdt, machine, pm->cpu_hp_io_base); > } else { > @@ -1546,7 +1549,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > { > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > - if (misc->is_piix4) { > + if (misc->is_piix4 || pm->pcihp_bridge_en) { > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > aml_append(method, > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF));
On Fri, Aug 21, 2020 at 2:08 PM Igor Mammedov <imammedo@redhat.com> wrote: > > On Tue, 18 Aug 2020 23:52:25 +0200 > Julia Suvorova <jusual@redhat.com> wrote: > > > Implement notifications and gpe to support q35 ACPI PCI hot-plug. > > Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports. > > in addition to comment from Philippe > > > > > > Signed-off-by: Julia Suvorova <jusual@redhat.com> > > --- > > include/hw/acpi/pcihp.h | 3 ++- > > hw/acpi/pcihp.c | 10 ++++++---- > > hw/acpi/piix4.c | 2 +- > > hw/i386/acpi-build.c | 25 ++++++++++++++----------- > > 4 files changed, 23 insertions(+), 17 deletions(-) > > > > diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h > > index 8bc4a4c01d..1e9d246f57 100644 > > --- a/include/hw/acpi/pcihp.h > > +++ b/include/hw/acpi/pcihp.h > > @@ -54,7 +54,8 @@ typedef struct AcpiPciHpState { > > } AcpiPciHpState; > > > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root, > > - MemoryRegion *address_space_io, bool bridges_enabled); > > + MemoryRegion *address_space_io, bool bridges_enabled, > > + bool is_piix4); > > > > void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev, > > DeviceState *dev, Error **errp); > > diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c > > index 9e31ab2da4..9a35ed6c83 100644 > > --- a/hw/acpi/pcihp.c > > +++ b/hw/acpi/pcihp.c > > @@ -38,7 +38,8 @@ > > #include "qom/qom-qobject.h" > > #include "trace.h" > > > > -#define ACPI_PCIHP_ADDR 0xae00 > > +#define ACPI_PCIHP_ADDR_PIIX4 0xae00 > > +#define ACPI_PCIHP_ADDR_Q35 0x0cc4 > > #define ACPI_PCIHP_SIZE 0x0014 > > #define PCI_UP_BASE 0x0000 > > #define PCI_DOWN_BASE 0x0004 > > @@ -359,12 +360,13 @@ static const MemoryRegionOps acpi_pcihp_io_ops = { > > }; > > > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *s, PCIBus *root_bus, > > - MemoryRegion *address_space_io, bool bridges_enabled) > > + MemoryRegion *address_space_io, bool bridges_enabled, > > + bool is_piix4) > > { > > s->io_len = ACPI_PCIHP_SIZE; > > - s->io_base = ACPI_PCIHP_ADDR; > > + s->io_base = is_piix4 ? ACPI_PCIHP_ADDR_PIIX4 : ACPI_PCIHP_ADDR_Q35; > > > > - s->root= root_bus; > > + s->root = root_bus; > > s->legacy_piix = !bridges_enabled; > > > > memory_region_init_io(&s->io, owner, &acpi_pcihp_io_ops, s, > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > > index cdfa0e2998..1f27bfbd06 100644 > > --- a/hw/acpi/piix4.c > > +++ b/hw/acpi/piix4.c > > @@ -596,7 +596,7 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > > > acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > - s->use_acpi_hotplug_bridge); > > + s->use_acpi_hotplug_bridge, true); > > > > s->cpu_hotplug_legacy = true; > > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > > index b7bcbbbb2a..f3cd52bd06 100644 > > --- a/hw/i386/acpi-build.c > > +++ b/hw/i386/acpi-build.c > > @@ -201,10 +201,6 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > > /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */ > > pm->fadt.rev = 1; > > pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE; > > - pm->pcihp_io_base = > > - object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > > - pm->pcihp_io_len = > > - object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > > } > > if (lpc) { > > struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO, > > @@ -214,6 +210,10 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > > pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP; > > pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE; > > } > > + pm->pcihp_io_base = > > + object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > > + pm->pcihp_io_len = > > + object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > > > > /* The above need not be conditional on machine type because the reset port > > * happens to be the same on PIIX (pc) and ICH9 (q35). */ > > @@ -472,7 +472,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > QLIST_FOREACH(sec, &bus->child, sibling) { > > int32_t devfn = sec->parent_dev->devfn; > > > > - if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) { > > + if (pci_bus_is_root(sec)) { > Does pcie bus on hostbridge fall into pci_bus_is_express() categiry or not? I don't understand why it's there in the first place. pci_bus_is_root() check is for pxb, but pci_bus_is_express() is useless because everything is under 'if (pcihp_bridge_en) {', which means that no pcie bus will get there (before this patch). > > continue; > > } > > > > @@ -1368,7 +1368,7 @@ static void build_piix4_isa_bridge(Aml *table) > > aml_append(table, scope); > > } > > > > -static void build_piix4_pci_hotplug(Aml *table) > > +static void build_i386_pci_hotplug(Aml *table, uint64_t pcihp_addr) > > { > > Aml *scope; > > Aml *field; > > @@ -1377,20 +1377,22 @@ static void build_piix4_pci_hotplug(Aml *table) > > scope = aml_scope("_SB.PCI0"); > > > > aml_append(scope, > > - aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08)); > > + aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(pcihp_addr), 0x08)); > > field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > > aml_append(field, aml_named_field("PCIU", 32)); > > aml_append(field, aml_named_field("PCID", 32)); > > aml_append(scope, field); > > > > aml_append(scope, > > - aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04)); > > + aml_operation_region("SEJ", AML_SYSTEM_IO, > > + aml_int(pcihp_addr + 0x08), 0x04)); > ^^^^ > how about turning this offset into macro? > > > field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > > aml_append(field, aml_named_field("B0EJ", 32)); > > aml_append(scope, field); > > > > aml_append(scope, > > - aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04)); > > + aml_operation_region("BNMR", AML_SYSTEM_IO, > > + aml_int(pcihp_addr + 0x10), 0x04)); > ditto > > > field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > > aml_append(field, aml_named_field("BNUM", 32)); > > aml_append(scope, field); > > @@ -1504,7 +1506,6 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > build_hpet_aml(dsdt); > > build_piix4_isa_bridge(dsdt); > > build_isa_devices_aml(dsdt); > > - build_piix4_pci_hotplug(dsdt); > > build_piix4_pci0_int(dsdt); > > } else { > > sb_scope = aml_scope("_SB"); > > @@ -1526,6 +1527,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > } > > } > > > > + build_i386_pci_hotplug(dsdt, pm->pcihp_io_base); > > + > > if (pcmc->legacy_cpu_hotplug) { > > build_legacy_cpu_hotplug_aml(dsdt, machine, pm->cpu_hp_io_base); > > } else { > > @@ -1546,7 +1549,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > { > > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > > > - if (misc->is_piix4) { > > + if (misc->is_piix4 || pm->pcihp_bridge_en) { > > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > > aml_append(method, > > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); >
On Wed, Aug 19, 2020 at 5:21 AM Philippe Mathieu-Daudé <philmd@redhat.com> wrote: > > Hi Julia, > > On 8/18/20 11:52 PM, Julia Suvorova wrote: > > Implement notifications and gpe to support q35 ACPI PCI hot-plug. > > Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports. > > > > Signed-off-by: Julia Suvorova <jusual@redhat.com> > > --- > > include/hw/acpi/pcihp.h | 3 ++- > > hw/acpi/pcihp.c | 10 ++++++---- > > hw/acpi/piix4.c | 2 +- > > hw/i386/acpi-build.c | 25 ++++++++++++++----------- > > 4 files changed, 23 insertions(+), 17 deletions(-) > > > > diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h > > index 8bc4a4c01d..1e9d246f57 100644 > > --- a/include/hw/acpi/pcihp.h > > +++ b/include/hw/acpi/pcihp.h > > @@ -54,7 +54,8 @@ typedef struct AcpiPciHpState { > > } AcpiPciHpState; > > > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root, > > - MemoryRegion *address_space_io, bool bridges_enabled); > > + MemoryRegion *address_space_io, bool bridges_enabled, > > + bool is_piix4); > > > > void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev, > > DeviceState *dev, Error **errp); > > diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c > > index 9e31ab2da4..9a35ed6c83 100644 > > --- a/hw/acpi/pcihp.c > > +++ b/hw/acpi/pcihp.c > > @@ -38,7 +38,8 @@ > > #include "qom/qom-qobject.h" > > #include "trace.h" > > > > -#define ACPI_PCIHP_ADDR 0xae00 > > +#define ACPI_PCIHP_ADDR_PIIX4 0xae00 > > +#define ACPI_PCIHP_ADDR_Q35 0x0cc4 > > #define ACPI_PCIHP_SIZE 0x0014 > > #define PCI_UP_BASE 0x0000 > > #define PCI_DOWN_BASE 0x0004 > > @@ -359,12 +360,13 @@ static const MemoryRegionOps acpi_pcihp_io_ops = { > > }; > > > > void acpi_pcihp_init(Object *owner, AcpiPciHpState *s, PCIBus *root_bus, > > - MemoryRegion *address_space_io, bool bridges_enabled) > > + MemoryRegion *address_space_io, bool bridges_enabled, > > + bool is_piix4) > > Instead of adding implementation knowledge to this generic function, can > you instead pass it a 'io_base' argument (or 'pcihp_addr')? Ok. > > { > > s->io_len = ACPI_PCIHP_SIZE; > > - s->io_base = ACPI_PCIHP_ADDR; > > + s->io_base = is_piix4 ? ACPI_PCIHP_ADDR_PIIX4 : ACPI_PCIHP_ADDR_Q35; > > > > - s->root= root_bus; > > + s->root = root_bus; > > s->legacy_piix = !bridges_enabled; > > > > memory_region_init_io(&s->io, owner, &acpi_pcihp_io_ops, s, > > diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c > > index cdfa0e2998..1f27bfbd06 100644 > > --- a/hw/acpi/piix4.c > > +++ b/hw/acpi/piix4.c > > @@ -596,7 +596,7 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, > > memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); > > > > acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, > > - s->use_acpi_hotplug_bridge); > > + s->use_acpi_hotplug_bridge, true); > > > > s->cpu_hotplug_legacy = true; > > object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", > > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c > > index b7bcbbbb2a..f3cd52bd06 100644 > > --- a/hw/i386/acpi-build.c > > +++ b/hw/i386/acpi-build.c > > @@ -201,10 +201,6 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > > /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */ > > pm->fadt.rev = 1; > > pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE; > > - pm->pcihp_io_base = > > - object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > > - pm->pcihp_io_len = > > - object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > > } > > if (lpc) { > > struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO, > > @@ -214,6 +210,10 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) > > pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP; > > pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE; > > } > > + pm->pcihp_io_base = > > + object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); > > + pm->pcihp_io_len = > > + object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); > > > > /* The above need not be conditional on machine type because the reset port > > * happens to be the same on PIIX (pc) and ICH9 (q35). */ > > @@ -472,7 +472,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, > > QLIST_FOREACH(sec, &bus->child, sibling) { > > int32_t devfn = sec->parent_dev->devfn; > > > > - if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) { > > + if (pci_bus_is_root(sec)) { > > Different patch? PCNT method is part of ACPI hot-plug, and we add it to q35 (pcie). > > continue; > > } > > > > @@ -1368,7 +1368,7 @@ static void build_piix4_isa_bridge(Aml *table) > > aml_append(table, scope); > > } > > > > -static void build_piix4_pci_hotplug(Aml *table) > > +static void build_i386_pci_hotplug(Aml *table, uint64_t pcihp_addr) > > Being common to 32/64-bit, I'd name that build_x86_pci_hotplug(). > > > { > > Aml *scope; > > Aml *field; > > @@ -1377,20 +1377,22 @@ static void build_piix4_pci_hotplug(Aml *table) > > scope = aml_scope("_SB.PCI0"); > > > > aml_append(scope, > > - aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08)); > > + aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(pcihp_addr), 0x08)); > > field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > > aml_append(field, aml_named_field("PCIU", 32)); > > aml_append(field, aml_named_field("PCID", 32)); > > aml_append(scope, field); > > > > aml_append(scope, > > - aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04)); > > + aml_operation_region("SEJ", AML_SYSTEM_IO, > > + aml_int(pcihp_addr + 0x08), 0x04)); > > field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > > aml_append(field, aml_named_field("B0EJ", 32)); > > aml_append(scope, field); > > > > aml_append(scope, > > - aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04)); > > + aml_operation_region("BNMR", AML_SYSTEM_IO, > > + aml_int(pcihp_addr + 0x10), 0x04)); > > field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); > > aml_append(field, aml_named_field("BNUM", 32)); > > aml_append(scope, field); > > @@ -1504,7 +1506,6 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > build_hpet_aml(dsdt); > > build_piix4_isa_bridge(dsdt); > > build_isa_devices_aml(dsdt); > > - build_piix4_pci_hotplug(dsdt); > > build_piix4_pci0_int(dsdt); > > } else { > > sb_scope = aml_scope("_SB"); > > @@ -1526,6 +1527,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > } > > } > > > > + build_i386_pci_hotplug(dsdt, pm->pcihp_io_base); > > + > > if (pcmc->legacy_cpu_hotplug) { > > build_legacy_cpu_hotplug_aml(dsdt, machine, pm->cpu_hp_io_base); > > } else { > > @@ -1546,7 +1549,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, > > { > > aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); > > > > - if (misc->is_piix4) { > > + if (misc->is_piix4 || pm->pcihp_bridge_en) { > > Why not directly check 'if (pm->pcihp_bridge_en) {'? GPE.1 should be implemented for pci root hotplug on piix4 even if pcihp_bridge_en is disabled. There will be a bit different logic with "[PATCH v5 09/11] piix4: don't reserve hw resources when hotplug is off globally", but it's not merged yet. > > method = aml_method("_E01", 0, AML_NOTSERIALIZED); > > aml_append(method, > > aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF)); > > > > Regards, > > Phil. >
diff --git a/include/hw/acpi/pcihp.h b/include/hw/acpi/pcihp.h index 8bc4a4c01d..1e9d246f57 100644 --- a/include/hw/acpi/pcihp.h +++ b/include/hw/acpi/pcihp.h @@ -54,7 +54,8 @@ typedef struct AcpiPciHpState { } AcpiPciHpState; void acpi_pcihp_init(Object *owner, AcpiPciHpState *, PCIBus *root, - MemoryRegion *address_space_io, bool bridges_enabled); + MemoryRegion *address_space_io, bool bridges_enabled, + bool is_piix4); void acpi_pcihp_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp); diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c index 9e31ab2da4..9a35ed6c83 100644 --- a/hw/acpi/pcihp.c +++ b/hw/acpi/pcihp.c @@ -38,7 +38,8 @@ #include "qom/qom-qobject.h" #include "trace.h" -#define ACPI_PCIHP_ADDR 0xae00 +#define ACPI_PCIHP_ADDR_PIIX4 0xae00 +#define ACPI_PCIHP_ADDR_Q35 0x0cc4 #define ACPI_PCIHP_SIZE 0x0014 #define PCI_UP_BASE 0x0000 #define PCI_DOWN_BASE 0x0004 @@ -359,12 +360,13 @@ static const MemoryRegionOps acpi_pcihp_io_ops = { }; void acpi_pcihp_init(Object *owner, AcpiPciHpState *s, PCIBus *root_bus, - MemoryRegion *address_space_io, bool bridges_enabled) + MemoryRegion *address_space_io, bool bridges_enabled, + bool is_piix4) { s->io_len = ACPI_PCIHP_SIZE; - s->io_base = ACPI_PCIHP_ADDR; + s->io_base = is_piix4 ? ACPI_PCIHP_ADDR_PIIX4 : ACPI_PCIHP_ADDR_Q35; - s->root= root_bus; + s->root = root_bus; s->legacy_piix = !bridges_enabled; memory_region_init_io(&s->io, owner, &acpi_pcihp_io_ops, s, diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c index cdfa0e2998..1f27bfbd06 100644 --- a/hw/acpi/piix4.c +++ b/hw/acpi/piix4.c @@ -596,7 +596,7 @@ static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); acpi_pcihp_init(OBJECT(s), &s->acpi_pci_hotplug, bus, parent, - s->use_acpi_hotplug_bridge); + s->use_acpi_hotplug_bridge, true); s->cpu_hotplug_legacy = true; object_property_add_bool(OBJECT(s), "cpu-hotplug-legacy", diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index b7bcbbbb2a..f3cd52bd06 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -201,10 +201,6 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) /* w2k requires FADT(rev1) or it won't boot, keep PC compatible */ pm->fadt.rev = 1; pm->cpu_hp_io_base = PIIX4_CPU_HOTPLUG_IO_BASE; - pm->pcihp_io_base = - object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); - pm->pcihp_io_len = - object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); } if (lpc) { struct AcpiGenericAddress r = { .space_id = AML_AS_SYSTEM_IO, @@ -214,6 +210,10 @@ static void acpi_get_pm_info(MachineState *machine, AcpiPmInfo *pm) pm->fadt.flags |= 1 << ACPI_FADT_F_RESET_REG_SUP; pm->cpu_hp_io_base = ICH9_CPU_HOTPLUG_IO_BASE; } + pm->pcihp_io_base = + object_property_get_uint(obj, ACPI_PCIHP_IO_BASE_PROP, NULL); + pm->pcihp_io_len = + object_property_get_uint(obj, ACPI_PCIHP_IO_LEN_PROP, NULL); /* The above need not be conditional on machine type because the reset port * happens to be the same on PIIX (pc) and ICH9 (q35). */ @@ -472,7 +472,7 @@ static void build_append_pci_bus_devices(Aml *parent_scope, PCIBus *bus, QLIST_FOREACH(sec, &bus->child, sibling) { int32_t devfn = sec->parent_dev->devfn; - if (pci_bus_is_root(sec) || pci_bus_is_express(sec)) { + if (pci_bus_is_root(sec)) { continue; } @@ -1368,7 +1368,7 @@ static void build_piix4_isa_bridge(Aml *table) aml_append(table, scope); } -static void build_piix4_pci_hotplug(Aml *table) +static void build_i386_pci_hotplug(Aml *table, uint64_t pcihp_addr) { Aml *scope; Aml *field; @@ -1377,20 +1377,22 @@ static void build_piix4_pci_hotplug(Aml *table) scope = aml_scope("_SB.PCI0"); aml_append(scope, - aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(0xae00), 0x08)); + aml_operation_region("PCST", AML_SYSTEM_IO, aml_int(pcihp_addr), 0x08)); field = aml_field("PCST", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); aml_append(field, aml_named_field("PCIU", 32)); aml_append(field, aml_named_field("PCID", 32)); aml_append(scope, field); aml_append(scope, - aml_operation_region("SEJ", AML_SYSTEM_IO, aml_int(0xae08), 0x04)); + aml_operation_region("SEJ", AML_SYSTEM_IO, + aml_int(pcihp_addr + 0x08), 0x04)); field = aml_field("SEJ", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); aml_append(field, aml_named_field("B0EJ", 32)); aml_append(scope, field); aml_append(scope, - aml_operation_region("BNMR", AML_SYSTEM_IO, aml_int(0xae10), 0x04)); + aml_operation_region("BNMR", AML_SYSTEM_IO, + aml_int(pcihp_addr + 0x10), 0x04)); field = aml_field("BNMR", AML_DWORD_ACC, AML_NOLOCK, AML_WRITE_AS_ZEROS); aml_append(field, aml_named_field("BNUM", 32)); aml_append(scope, field); @@ -1504,7 +1506,6 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, build_hpet_aml(dsdt); build_piix4_isa_bridge(dsdt); build_isa_devices_aml(dsdt); - build_piix4_pci_hotplug(dsdt); build_piix4_pci0_int(dsdt); } else { sb_scope = aml_scope("_SB"); @@ -1526,6 +1527,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, } } + build_i386_pci_hotplug(dsdt, pm->pcihp_io_base); + if (pcmc->legacy_cpu_hotplug) { build_legacy_cpu_hotplug_aml(dsdt, machine, pm->cpu_hp_io_base); } else { @@ -1546,7 +1549,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, { aml_append(scope, aml_name_decl("_HID", aml_string("ACPI0006"))); - if (misc->is_piix4) { + if (misc->is_piix4 || pm->pcihp_bridge_en) { method = aml_method("_E01", 0, AML_NOTSERIALIZED); aml_append(method, aml_acquire(aml_name("\\_SB.PCI0.BLCK"), 0xFFFF));
Implement notifications and gpe to support q35 ACPI PCI hot-plug. Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports. Signed-off-by: Julia Suvorova <jusual@redhat.com> --- include/hw/acpi/pcihp.h | 3 ++- hw/acpi/pcihp.c | 10 ++++++---- hw/acpi/piix4.c | 2 +- hw/i386/acpi-build.c | 25 ++++++++++++++----------- 4 files changed, 23 insertions(+), 17 deletions(-)