@@ -30,6 +30,7 @@
#include "exec/hwaddr.h"
#include "kvm_arm.h"
#include "hw/arm/boot.h"
+#include "hw/arm/fdt.h"
#include "hw/block/flash.h"
#include "hw/boards.h"
#include "hw/ide/internal.h"
@@ -40,6 +41,7 @@
#include "hw/qdev-properties.h"
#include "hw/usb.h"
#include "hw/char/pl011.h"
+#include "hw/watchdog/wdt_sbsa_gwdt.h"
#include "net/net.h"
#include "qom/object.h"
@@ -64,6 +66,9 @@ enum {
SBSA_GIC_DIST,
SBSA_GIC_REDIST,
SBSA_SECURE_EC,
+ SBSA_GWDT,
+ SBSA_GWDT_REFRESH,
+ SBSA_GWDT_CONTROL,
SBSA_SMMU,
SBSA_UART,
SBSA_RTC,
@@ -104,6 +109,8 @@ static const MemMapEntry sbsa_ref_memmap[] = {
[SBSA_GIC_DIST] = { 0x40060000, 0x00010000 },
[SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 },
[SBSA_SECURE_EC] = { 0x50000000, 0x00001000 },
+ [SBSA_GWDT_REFRESH] = { 0x50010000, 0x00001000 },
+ [SBSA_GWDT_CONTROL] = { 0x50011000, 0x00001000 },
[SBSA_UART] = { 0x60000000, 0x00001000 },
[SBSA_RTC] = { 0x60010000, 0x00001000 },
[SBSA_GPIO] = { 0x60020000, 0x00001000 },
@@ -133,6 +140,7 @@ static const int sbsa_ref_irqmap[] = {
[SBSA_SECURE_UART_MM] = 9,
[SBSA_AHCI] = 10,
[SBSA_EHCI] = 11,
+ [SBSA_GWDT] = 12,
};
static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
@@ -141,6 +149,30 @@ static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
return arm_cpu_mp_affinity(idx, clustersz);
}
+static void create_wdt_fdt(SBSAMachineState *sms)
+{
+ char *nodename;
+ const char compat[] = "arm,sbsa-gwdt";
+
+ hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base;
+ hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base;
+ int irq = sbsa_ref_irqmap[SBSA_GWDT];
+
+ nodename = g_strdup_printf("/watchdog@%" PRIx64, rbase);
+ qemu_fdt_add_subnode(sms->fdt, nodename);
+
+ qemu_fdt_setprop(sms->fdt, nodename, "compatible",
+ compat, sizeof(compat));
+ qemu_fdt_setprop_sized_cells(sms->fdt, nodename, "reg",
+ 2, rbase, 2, SBSA_GWDT_RMMIO_SIZE,
+ 2, cbase, 2, SBSA_GWDT_CMMIO_SIZE);
+ qemu_fdt_setprop_cells(sms->fdt, nodename, "interrupts",
+ GIC_FDT_IRQ_TYPE_PPI, irq,
+ GIC_FDT_IRQ_FLAGS_LEVEL_HI);
+ qemu_fdt_setprop_cell(sms->fdt, nodename, "timeout-sec", 30);
+ g_free(nodename);
+}
+
/*
* Firmware on this machine only uses ACPI table to load OS, these limited
* device tree nodes are just to let firmware know the info which varies from
@@ -219,6 +251,7 @@ static void create_fdt(SBSAMachineState *sms)
g_free(nodename);
}
+ create_wdt_fdt(sms);
}
#define SBSA_FLASH_SECTOR_SIZE (256 * KiB)
@@ -447,6 +480,20 @@ static void create_rtc(const SBSAMachineState *sms)
sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic, irq));
}
+static void create_wdt(const SBSAMachineState *sms)
+{
+ hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base;
+ hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base;
+ DeviceState *dev = qdev_new(TYPE_WDT_SBSA_GWDT);
+ SysBusDevice *s = SYS_BUS_DEVICE(dev);
+ int irq = sbsa_ref_irqmap[SBSA_GWDT];
+
+ sysbus_realize_and_unref(s, &error_fatal);
+ sysbus_mmio_map(s, 0, rbase);
+ sysbus_mmio_map(s, 1, cbase);
+ sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq));
+}
+
static DeviceState *gpio_key_dev;
static void sbsa_ref_powerdown_req(Notifier *n, void *opaque)
{
@@ -730,6 +777,8 @@ static void sbsa_ref_init(MachineState *machine)
create_rtc(sms);
+ create_wdt(sms);
+
create_gpio(sms);
create_ahci(sms);
Included the newly implemented SBSA generic watchdog device model into SBSA platform Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> --- hw/arm/sbsa-ref.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)