[v3,2/3] hw/arm: Add npcm7xx emc model

Commit Message

Doug Evans Feb. 9, 2021, 1:55 a.m. UTC

This is a 10/100 ethernet device that has several features.
Only the ones needed by the Linux driver have been implemented.
See npcm7xx_emc.c for a list of unimplemented features.

Reviewed-by: Hao Wu <[e-mail]>
Reviewed-by: Avi Fishman <[e-mail]>
Reviewed-by: Peter Maydell <[e-mail]>
Signed-off-by: Doug Evans <[e-mail]>
---

Differences from v2:
- none, patch ok as is

 docs/system/arm/nuvoton.rst |  3 ++-
 hw/arm/npcm7xx.c            | 50 +++++++++++++++++++++++++++++++++++--
 include/hw/arm/npcm7xx.h    |  2 ++
 3 files changed, 52 insertions(+), 3 deletions(-)

Patch

diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst
index a1786342e2..c6e9a4c17e 100644
--- a/docs/system/arm/nuvoton.rst
+++ b/docs/system/arm/nuvoton.rst
@@ -43,6 +43,7 @@  Supported devices
  * GPIO controller
  * Analog to Digital Converter (ADC)
  * Pulse Width Modulation (PWM)
+ * Ethernet controller (EMC)
 
 Missing devices
 ---------------
@@ -56,7 +57,7 @@  Missing devices
    * Shared memory (SHM)
    * eSPI slave interface
 
- * Ethernet controllers (GMAC and EMC)
+ * Ethernet controller (GMAC)
  * USB device (USBD)
  * SMBus controller (SMBF)
  * Peripheral SPI controller (PSPI)
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index 72040d4079..94b79ff4c0 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -82,6 +82,8 @@  enum NPCM7xxInterrupt {
     NPCM7XX_UART1_IRQ,
     NPCM7XX_UART2_IRQ,
     NPCM7XX_UART3_IRQ,
+    NPCM7XX_EMC1RX_IRQ          = 15,
+    NPCM7XX_EMC1TX_IRQ,
     NPCM7XX_TIMER0_IRQ          = 32,   /* Timer Module 0 */
     NPCM7XX_TIMER1_IRQ,
     NPCM7XX_TIMER2_IRQ,
@@ -104,6 +106,8 @@  enum NPCM7xxInterrupt {
     NPCM7XX_OHCI_IRQ            = 62,
     NPCM7XX_PWM0_IRQ            = 93,   /* PWM module 0 */
     NPCM7XX_PWM1_IRQ,                   /* PWM module 1 */
+    NPCM7XX_EMC2RX_IRQ          = 114,
+    NPCM7XX_EMC2TX_IRQ,
     NPCM7XX_GPIO0_IRQ           = 116,
     NPCM7XX_GPIO1_IRQ,
     NPCM7XX_GPIO2_IRQ,
@@ -152,6 +156,12 @@  static const hwaddr npcm7xx_pwm_addr[] = {
     0xf0104000,
 };
 
+/* Register base address for each EMC Module */
+static const hwaddr npcm7xx_emc_addr[] = {
+    0xf0825000,
+    0xf0826000,
+};
+
 static const struct {
     hwaddr regs_addr;
     uint32_t unconnected_pins;
@@ -365,6 +375,10 @@  static void npcm7xx_init(Object *obj)
     for (i = 0; i < ARRAY_SIZE(s->pwm); i++) {
         object_initialize_child(obj, "pwm[*]", &s->pwm[i], TYPE_NPCM7XX_PWM);
     }
+
+    for (i = 0; i < ARRAY_SIZE(s->emc); i++) {
+        object_initialize_child(obj, "emc[*]", &s->emc[i], TYPE_NPCM7XX_EMC);
+    }
 }
 
 static void npcm7xx_realize(DeviceState *dev, Error **errp)
@@ -537,6 +551,40 @@  static void npcm7xx_realize(DeviceState *dev, Error **errp)
         sysbus_connect_irq(sbd, i, npcm7xx_irq(s, NPCM7XX_PWM0_IRQ + i));
     }
 
+    /*
+     * EMC Modules. Cannot fail.
+     * The mapping of the device to its netdev backend works as follows:
+     * emc[i] = nd_table[i]
+     * This works around the inability to specify the netdev property for the
+     * emc device: it's not pluggable and thus the -device option can't be
+     * used.
+     */
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(npcm7xx_emc_addr) != ARRAY_SIZE(s->emc));
+    QEMU_BUILD_BUG_ON(ARRAY_SIZE(s->emc) != 2);
+    for (i = 0; i < ARRAY_SIZE(s->emc); i++) {
+        s->emc[i].emc_num = i;
+        SysBusDevice *sbd = SYS_BUS_DEVICE(&s->emc[i]);
+        if (nd_table[i].used) {
+            qemu_check_nic_model(&nd_table[i], TYPE_NPCM7XX_EMC);
+            qdev_set_nic_properties(DEVICE(sbd), &nd_table[i]);
+        }
+        /*
+         * The device exists regardless of whether it's connected to a QEMU
+         * netdev backend. So always instantiate it even if there is no
+         * backend.
+         */
+        sysbus_realize(sbd, &error_abort);
+        sysbus_mmio_map(sbd, 0, npcm7xx_emc_addr[i]);
+        int tx_irq = i == 0 ? NPCM7XX_EMC1TX_IRQ : NPCM7XX_EMC2TX_IRQ;
+        int rx_irq = i == 0 ? NPCM7XX_EMC1RX_IRQ : NPCM7XX_EMC2RX_IRQ;
+        /*
+         * N.B. The values for the second argument sysbus_connect_irq are
+         * chosen to match the registration order in npcm7xx_emc_realize.
+         */
+        sysbus_connect_irq(sbd, 0, npcm7xx_irq(s, tx_irq));
+        sysbus_connect_irq(sbd, 1, npcm7xx_irq(s, rx_irq));
+    }
+
     /*
      * Flash Interface Unit (FIU). Can fail if incorrect number of chip selects
      * specified, but this is a programming error.
@@ -621,8 +669,6 @@  static void npcm7xx_realize(DeviceState *dev, Error **errp)
     create_unimplemented_device("npcm7xx.vcd",          0xf0810000,  64 * KiB);
     create_unimplemented_device("npcm7xx.ece",          0xf0820000,   8 * KiB);
     create_unimplemented_device("npcm7xx.vdma",         0xf0822000,   8 * KiB);
-    create_unimplemented_device("npcm7xx.emc1",         0xf0825000,   4 * KiB);
-    create_unimplemented_device("npcm7xx.emc2",         0xf0826000,   4 * KiB);
     create_unimplemented_device("npcm7xx.usbd[0]",      0xf0830000,   4 * KiB);
     create_unimplemented_device("npcm7xx.usbd[1]",      0xf0831000,   4 * KiB);
     create_unimplemented_device("npcm7xx.usbd[2]",      0xf0832000,   4 * KiB);
diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h
index f6227aa8aa..3bfc75aafe 100644
--- a/include/hw/arm/npcm7xx.h
+++ b/include/hw/arm/npcm7xx.h
@@ -25,6 +25,7 @@ 
 #include "hw/misc/npcm7xx_gcr.h"
 #include "hw/misc/npcm7xx_pwm.h"
 #include "hw/misc/npcm7xx_rng.h"
+#include "hw/net/npcm7xx_emc.h"
 #include "hw/nvram/npcm7xx_otp.h"
 #include "hw/timer/npcm7xx_timer.h"
 #include "hw/ssi/npcm7xx_fiu.h"
@@ -88,6 +89,7 @@  typedef struct NPCM7xxState {
     EHCISysBusState     ehci;
     OHCISysBusState     ohci;
     NPCM7xxFIUState     fiu[2];
+    NPCM7xxEMCState     emc[2];
 } NPCM7xxState;
 
 #define TYPE_NPCM7XX    "npcm7xx"