@@ -2494,6 +2494,7 @@ if have_system
'hw/rtc',
'hw/s390x',
'hw/scsi',
+ 'hw/sensor',
'hw/sd',
'hw/sh4',
'hw/sparc',
new file mode 100644
@@ -0,0 +1 @@
+#include "trace/trace-hw_sensor.h"
new file mode 100644
@@ -0,0 +1,45 @@
+/*
+ * AMD SBI Temperature Sensor Interface (SB-TSI)
+ *
+ * Copyright 2021 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef QEMU_TMP_SBTSI_H
+#define QEMU_TMP_SBTSI_H
+
+/*
+ * SB-TSI registers only support SMBus byte data access. "_INT" registers are
+ * the integer part of a temperature value or limit, and "_DEC" registers are
+ * corresponding decimal parts.
+ */
+#define SBTSI_REG_TEMP_INT 0x01 /* RO */
+#define SBTSI_REG_STATUS 0x02 /* RO */
+#define SBTSI_REG_CONFIG 0x03 /* RO */
+#define SBTSI_REG_TEMP_HIGH_INT 0x07 /* RW */
+#define SBTSI_REG_TEMP_LOW_INT 0x08 /* RW */
+#define SBTSI_REG_CONFIG_WR 0x09 /* RW */
+#define SBTSI_REG_TEMP_DEC 0x10 /* RO */
+#define SBTSI_REG_TEMP_HIGH_DEC 0x13 /* RW */
+#define SBTSI_REG_TEMP_LOW_DEC 0x14 /* RW */
+#define SBTSI_REG_ALERT_CONFIG 0xBF /* RW */
+#define SBTSI_REG_MAN 0xFE /* RO */
+#define SBTSI_REG_REV 0xFF /* RO */
+
+#define SBTSI_STATUS_HIGH_ALERT BIT(4)
+#define SBTSI_STATUS_LOW_ALERT BIT(3)
+#define SBTSI_CONFIG_ALERT_MASK BIT(7)
+#define SBTSI_ALARM_EN BIT(0)
+
+/* The temperature we stored are in units of 0.125 degrees. */
+#define SBTSI_TEMP_UNIT_IN_MILLIDEGREE 125
+
+#endif
new file mode 100644
@@ -0,0 +1,369 @@
+/*
+ * AMD SBI Temperature Sensor Interface (SB-TSI)
+ *
+ * Copyright 2021 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/i2c/smbus_slave.h"
+#include "hw/sensor/sbtsi.h"
+#include "hw/irq.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qom/object.h"
+#include "trace.h"
+
+#define TYPE_SBTSI "sbtsi"
+#define SBTSI(obj) OBJECT_CHECK(SBTSIState, (obj), TYPE_SBTSI)
+
+/**
+ * SBTSIState:
+ * temperatures are in units of 0.125 degrees
+ * @temperature: Temperature
+ * @limit_low: Lowest temperature
+ * @limit_high: Highest temperature
+ * @status: The status register
+ * @config: The config register
+ * @alert_config: The config for alarm_l output.
+ * @addr: The address to read/write for the next cmd.
+ * @alarm: The alarm_l output pin (GPIO)
+ */
+typedef struct SBTSIState {
+ SMBusDevice parent;
+
+ uint32_t temperature;
+ uint32_t limit_low;
+ uint32_t limit_high;
+ uint8_t status;
+ uint8_t config;
+ uint8_t alert_config;
+ uint8_t addr;
+ qemu_irq alarm;
+} SBTSIState;
+
+#define SBTSI_LIMIT_LOW_DEFAULT (0)
+#define SBTSI_LIMIT_HIGH_DEFAULT (560)
+#define SBTSI_MAN_DEFAULT (0)
+#define SBTSI_REV_DEFAULT (4)
+#define SBTSI_ALARM_L "alarm_l"
+
+/*
+ * The integer part and decimal of the temperature both 8 bits.
+ * Only the top 3 bits of the decimal parts are used.
+ * So the max temperature is (2^8-1) + (2^3-1)/8 = 255.875 degrees.
+ */
+#define SBTSI_TEMP_MAX_IN_MILLIDEGREE 255875
+
+/* The integer part of the temperature in terms of 0.125 degrees. */
+static uint8_t get_temp_int(uint32_t temp)
+{
+ return temp >> 3;
+}
+
+/*
+ * The decimal part of the temperature, in terms of 0.125 degrees.
+ * H/W store it in the top 3 bits so we shift it by 5.
+ */
+static uint8_t get_temp_dec(uint32_t temp)
+{
+ return (temp & 0x7) << 5;
+}
+
+/*
+ * Compute the temperature using the integer and decimal part,
+ * in terms of 0.125 degrees. The decimal part are only the top 3 bits
+ * so we shift it by 5 here.
+ */
+static uint32_t compute_temp(uint8_t integer, uint8_t decimal)
+{
+ return (integer << 3) + (decimal >> 5);
+}
+
+/* Compute new temp with new int part of the temperature. */
+static uint32_t compute_temp_int(uint32_t temp, uint8_t integer)
+{
+ return compute_temp(integer, get_temp_dec(temp));
+}
+
+/* Compute new temp with new dec part of the temperature. */
+static uint32_t compute_temp_dec(uint32_t temp, uint8_t decimal)
+{
+ return compute_temp(get_temp_int(temp), decimal);
+}
+
+/* The integer part of the temperature. */
+static void sbtsi_update_status(SBTSIState *s)
+{
+ s->status = 0;
+ if (s->alert_config & SBTSI_ALARM_EN) {
+ if (s->temperature >= s->limit_high) {
+ s->status |= SBTSI_STATUS_HIGH_ALERT;
+ }
+ if (s->temperature <= s->limit_low) {
+ s->status |= SBTSI_STATUS_LOW_ALERT;
+ }
+ }
+}
+
+static void sbtsi_update_alarm(SBTSIState *s)
+{
+ sbtsi_update_status(s);
+ if (s->status != 0 && !(s->config & SBTSI_CONFIG_ALERT_MASK)) {
+ qemu_irq_raise(s->alarm);
+ } else {
+ qemu_irq_lower(s->alarm);
+ }
+}
+
+static uint8_t sbtsi_read_byte(SMBusDevice *d)
+{
+ SBTSIState *s = SBTSI(d);
+ uint8_t data = 0;
+
+ switch (s->addr) {
+ case SBTSI_REG_TEMP_INT:
+ data = get_temp_int(s->temperature);
+ break;
+
+ case SBTSI_REG_TEMP_DEC:
+ data = get_temp_dec(s->temperature);
+ break;
+
+ case SBTSI_REG_TEMP_HIGH_INT:
+ data = get_temp_int(s->limit_high);
+ break;
+
+ case SBTSI_REG_TEMP_LOW_INT:
+ data = get_temp_int(s->limit_low);
+ break;
+
+ case SBTSI_REG_TEMP_HIGH_DEC:
+ data = get_temp_dec(s->limit_high);
+ break;
+
+ case SBTSI_REG_TEMP_LOW_DEC:
+ data = get_temp_dec(s->limit_low);
+ break;
+
+ case SBTSI_REG_CONFIG:
+ case SBTSI_REG_CONFIG_WR:
+ data = s->config;
+ break;
+
+ case SBTSI_REG_STATUS:
+ sbtsi_update_alarm(s);
+ data = s->status;
+ break;
+
+ case SBTSI_REG_ALERT_CONFIG:
+ data = s->alert_config;
+ break;
+
+ case SBTSI_REG_MAN:
+ data = SBTSI_MAN_DEFAULT;
+ break;
+
+ case SBTSI_REG_REV:
+ data = SBTSI_REV_DEFAULT;
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: reading from invalid reg: 0x%02x\n",
+ __func__, s->addr);
+ break;
+ }
+
+ trace_tmp_sbtsi_read_data(s->addr, data);
+ return data;
+}
+
+static void sbtsi_write(SBTSIState *s, uint8_t data)
+{
+ trace_tmp_sbtsi_write_data(s->addr, data);
+ switch (s->addr) {
+ case SBTSI_REG_CONFIG_WR:
+ s->config = data;
+ break;
+
+ case SBTSI_REG_TEMP_HIGH_INT:
+ s->limit_high = compute_temp_int(s->limit_high, data);
+ break;
+
+ case SBTSI_REG_TEMP_LOW_INT:
+ s->limit_low = compute_temp_int(s->limit_low, data);
+ break;
+
+ case SBTSI_REG_TEMP_HIGH_DEC:
+ s->limit_high = compute_temp_dec(s->limit_high, data);
+ break;
+
+ case SBTSI_REG_TEMP_LOW_DEC:
+ s->limit_low = compute_temp_dec(s->limit_low, data);
+ break;
+
+ case SBTSI_REG_ALERT_CONFIG:
+ s->alert_config = data;
+ break;
+
+ case SBTSI_REG_TEMP_INT:
+ case SBTSI_REG_TEMP_DEC:
+ case SBTSI_REG_CONFIG:
+ case SBTSI_REG_STATUS:
+ case SBTSI_REG_MAN:
+ case SBTSI_REG_REV:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: writing to read only reg: 0x%02x data: 0x%02x\n",
+ __func__, s->addr, data);
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: writing to invalid reg: 0x%02x data: 0x%02x\n",
+ __func__, s->addr, data);
+ break;
+ }
+ sbtsi_update_alarm(s);
+}
+
+static int sbtsi_write_data(SMBusDevice *d, uint8_t *buf, uint8_t len)
+{
+ SBTSIState *s = SBTSI(d);
+
+ if (len == 0) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: writing empty data\n", __func__);
+ return -1;
+ }
+
+ s->addr = buf[0];
+ if (len > 1) {
+ sbtsi_write(s, buf[1]);
+ if (len > 2) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: extra data at end\n", __func__);
+ }
+ }
+ return 0;
+}
+
+/* Units are millidegrees. */
+static void sbtsi_get_temperature(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ SBTSIState *s = SBTSI(obj);
+ uint32_t temp = s->temperature * SBTSI_TEMP_UNIT_IN_MILLIDEGREE;
+
+ visit_type_uint32(v, name, &temp, errp);
+}
+
+/* Units are millidegrees. */
+static void sbtsi_set_temperature(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ SBTSIState *s = SBTSI(obj);
+ uint32_t temp;
+
+ if (!visit_type_uint32(v, name, &temp, errp)) {
+ return;
+ }
+ if (temp > SBTSI_TEMP_MAX_IN_MILLIDEGREE) {
+ error_setg(errp, "value %" PRIu32 ".%03" PRIu32 " C is out of range",
+ temp / 1000, temp % 1000);
+ return;
+ }
+
+ s->temperature = temp / SBTSI_TEMP_UNIT_IN_MILLIDEGREE;
+ sbtsi_update_alarm(s);
+}
+
+static int sbtsi_post_load(void *opaque, int version_id)
+{
+ SBTSIState *s = opaque;
+
+ sbtsi_update_alarm(s);
+ return 0;
+}
+
+static const VMStateDescription vmstate_sbtsi = {
+ .name = "SBTSI",
+ .version_id = 0,
+ .minimum_version_id = 0,
+ .post_load = sbtsi_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32(temperature, SBTSIState),
+ VMSTATE_UINT32(limit_low, SBTSIState),
+ VMSTATE_UINT32(limit_high, SBTSIState),
+ VMSTATE_UINT8(config, SBTSIState),
+ VMSTATE_UINT8(status, SBTSIState),
+ VMSTATE_UINT8(addr, SBTSIState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void sbtsi_enter_reset(Object *obj, ResetType type)
+{
+ SBTSIState *s = SBTSI(obj);
+
+ s->config = 0;
+ s->limit_low = SBTSI_LIMIT_LOW_DEFAULT;
+ s->limit_high = SBTSI_LIMIT_HIGH_DEFAULT;
+}
+
+static void sbtsi_hold_reset(Object *obj)
+{
+ SBTSIState *s = SBTSI(obj);
+
+ qemu_irq_lower(s->alarm);
+}
+
+static void sbtsi_init(Object *obj)
+{
+ SBTSIState *s = SBTSI(obj);
+
+ /* Current temperature in millidegrees. */
+ object_property_add(obj, "temperature", "uint32",
+ sbtsi_get_temperature, sbtsi_set_temperature,
+ NULL, NULL);
+ qdev_init_gpio_out_named(DEVICE(obj), &s->alarm, SBTSI_ALARM_L, 0);
+}
+
+static void sbtsi_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SMBusDeviceClass *k = SMBUS_DEVICE_CLASS(klass);
+
+ dc->desc = "SB-TSI Temperature Sensor";
+ dc->vmsd = &vmstate_sbtsi;
+ k->write_data = sbtsi_write_data;
+ k->receive_byte = sbtsi_read_byte;
+ rc->phases.enter = sbtsi_enter_reset;
+ rc->phases.hold = sbtsi_hold_reset;
+}
+
+static const TypeInfo sbtsi_info = {
+ .name = TYPE_SBTSI,
+ .parent = TYPE_SMBUS_DEVICE,
+ .instance_size = sizeof(SBTSIState),
+ .instance_init = sbtsi_init,
+ .class_init = sbtsi_class_init,
+};
+
+static void sbtsi_register_types(void)
+{
+ type_register_static(&sbtsi_info);
+}
+
+type_init(sbtsi_register_types)
@@ -21,3 +21,7 @@ config ADM1272
config MAX34451
bool
depends on I2C
+
+config AMDSBTSI
+ bool
+ depends on I2C
@@ -4,3 +4,4 @@ softmmu_ss.add(when: 'CONFIG_DPS310', if_true: files('dps310.c'))
softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c'))
softmmu_ss.add(when: 'CONFIG_ADM1272', if_true: files('adm1272.c'))
softmmu_ss.add(when: 'CONFIG_MAX34451', if_true: files('max34451.c'))
+softmmu_ss.add(when: 'CONFIG_AMDSBTSI', if_true: files('tmp_sbtsi.c'))
new file mode 100644
@@ -0,0 +1,5 @@
+# See docs/devel/tracing.rst for syntax documentation.
+
+# tmp_sbtsi.c
+tmp_sbtsi_write_data(uint8_t addr, uint8_t value) "SBTSI write addr:0x%02x data: 0x%02x"
+tmp_sbtsi_read_data(uint8_t addr, uint8_t value) "SBTSI read addr:0x%02x data: 0x%02x"