@@ -8,6 +8,7 @@
* should be used to determine that a VM is running under KVM.
*/
#define KVM_CPUID_SIGNATURE 0x40000000
+#define KVM_SIGNATURE "KVMKVMKVM\0\0\0"
/* This CPUID returns two feature bitmaps in eax, edx. Before enabling
* a particular paravirtualization, the appropriate feature bit should
@@ -313,6 +313,13 @@ extern "C" {
*/
#define DRM_FORMAT_P016 fourcc_code('P', '0', '1', '6') /* 2x2 subsampled Cr:Cb plane 16 bits per channel */
+/* 2 plane YCbCr420.
+ * 3 10 bit components and 2 padding bits packed into 4 bytes.
+ * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian
+ * index 1 = Cr:Cb plane, [63:0] x:Cr2:Cb2:Cr1:x:Cb1:Cr0:Cb0 [2:10:10:10:2:10:10:10] little endian
+ */
+#define DRM_FORMAT_P030 fourcc_code('P', '0', '3', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel packed */
+
/* 3 plane non-subsampled (444) YCbCr
* 16 bits per component, but only 10 bits are used and 6 bits are padded
* index 0: Y plane, [15:0] Y:x [10:6] little endian
@@ -853,6 +860,10 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier)
* and UV. Some SAND-using hardware stores UV in a separate tiled
* image from Y to reduce the column height, which is not supported
* with these modifiers.
+ *
+ * The DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT modifier is also
+ * supported for DRM_FORMAT_P030 where the columns remain as 128 bytes
+ * wide, but as this is a 10 bpp format that translates to 96 pixels.
*/
#define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \
@@ -231,6 +231,7 @@ enum tunable_id {
ETHTOOL_RX_COPYBREAK,
ETHTOOL_TX_COPYBREAK,
ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
+ ETHTOOL_TX_COPYBREAK_BUF_SIZE,
/*
* Add your fresh new tunable attribute above and remember to update
* tunable_strings[] in net/ethtool/common.c
@@ -184,6 +184,16 @@
*
* 7.34
* - add FUSE_SYNCFS
+ *
+ * 7.35
+ * - add FOPEN_NOFLUSH
+ *
+ * 7.36
+ * - extend fuse_init_in with reserved fields, add FUSE_INIT_EXT init flag
+ * - add flags2 to fuse_init_in and fuse_init_out
+ * - add FUSE_SECURITY_CTX init flag
+ * - add security context to create, mkdir, symlink, and mknod requests
+ * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX
*/
#ifndef _LINUX_FUSE_H
@@ -215,7 +225,7 @@
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 34
+#define FUSE_KERNEL_MINOR_VERSION 36
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
@@ -286,12 +296,14 @@ struct fuse_file_lock {
* FOPEN_NONSEEKABLE: the file is not seekable
* FOPEN_CACHE_DIR: allow caching this directory
* FOPEN_STREAM: the file is stream-like (no file position at all)
+ * FOPEN_NOFLUSH: don't flush data cache on close (unless FUSE_WRITEBACK_CACHE)
*/
#define FOPEN_DIRECT_IO (1 << 0)
#define FOPEN_KEEP_CACHE (1 << 1)
#define FOPEN_NONSEEKABLE (1 << 2)
#define FOPEN_CACHE_DIR (1 << 3)
#define FOPEN_STREAM (1 << 4)
+#define FOPEN_NOFLUSH (1 << 5)
/**
* INIT request/reply flags
@@ -332,6 +344,11 @@ struct fuse_file_lock {
* write/truncate sgid is killed only if file has group
* execute permission. (Same as Linux VFS behavior).
* FUSE_SETXATTR_EXT: Server supports extended struct fuse_setxattr_in
+ * FUSE_INIT_EXT: extended fuse_init_in request
+ * FUSE_INIT_RESERVED: reserved, do not use
+ * FUSE_SECURITY_CTX: add security context to create, mkdir, symlink, and
+ * mknod
+ * FUSE_HAS_INODE_DAX: use per inode DAX
*/
#define FUSE_ASYNC_READ (1 << 0)
#define FUSE_POSIX_LOCKS (1 << 1)
@@ -363,6 +380,11 @@ struct fuse_file_lock {
#define FUSE_SUBMOUNTS (1 << 27)
#define FUSE_HANDLE_KILLPRIV_V2 (1 << 28)
#define FUSE_SETXATTR_EXT (1 << 29)
+#define FUSE_INIT_EXT (1 << 30)
+#define FUSE_INIT_RESERVED (1 << 31)
+/* bits 32..63 get shifted down 32 bits into the flags2 field */
+#define FUSE_SECURITY_CTX (1ULL << 32)
+#define FUSE_HAS_INODE_DAX (1ULL << 33)
/**
* CUSE INIT request/reply flags
@@ -445,8 +467,10 @@ struct fuse_file_lock {
* fuse_attr flags
*
* FUSE_ATTR_SUBMOUNT: Object is a submount root
+ * FUSE_ATTR_DAX: Enable DAX for this file in per inode DAX mode
*/
#define FUSE_ATTR_SUBMOUNT (1 << 0)
+#define FUSE_ATTR_DAX (1 << 1)
/**
* Open flags
@@ -732,6 +756,8 @@ struct fuse_init_in {
uint32_t minor;
uint32_t max_readahead;
uint32_t flags;
+ uint32_t flags2;
+ uint32_t unused[11];
};
#define FUSE_COMPAT_INIT_OUT_SIZE 8
@@ -748,7 +774,8 @@ struct fuse_init_out {
uint32_t time_gran;
uint16_t max_pages;
uint16_t map_alignment;
- uint32_t unused[8];
+ uint32_t flags2;
+ uint32_t unused[7];
};
#define CUSE_INIT_INFO_MAX 4096
@@ -856,9 +883,12 @@ struct fuse_dirent {
char name[];
};
-#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
-#define FUSE_DIRENT_ALIGN(x) \
+/* Align variable length records to 64bit boundary */
+#define FUSE_REC_ALIGN(x) \
(((x) + sizeof(uint64_t) - 1) & ~(sizeof(uint64_t) - 1))
+
+#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
+#define FUSE_DIRENT_ALIGN(x) FUSE_REC_ALIGN(x)
#define FUSE_DIRENT_SIZE(d) \
FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
@@ -975,4 +1005,26 @@ struct fuse_syncfs_in {
uint64_t padding;
};
+/*
+ * For each security context, send fuse_secctx with size of security context
+ * fuse_secctx will be followed by security context name and this in turn
+ * will be followed by actual context label.
+ * fuse_secctx, name, context
+ */
+struct fuse_secctx {
+ uint32_t size;
+ uint32_t padding;
+};
+
+/*
+ * Contains the information about how many fuse_secctx structures are being
+ * sent and what's the total size of all security contexts (including
+ * size of fuse_secctx_header).
+ *
+ */
+struct fuse_secctx_header {
+ uint32_t size;
+ uint32_t nr_secctx;
+};
+
#endif /* _LINUX_FUSE_H */
@@ -301,23 +301,23 @@
#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
-/* Message Signalled Interrupt registers */
+/* Message Signaled Interrupt registers */
-#define PCI_MSI_FLAGS 2 /* Message Control */
+#define PCI_MSI_FLAGS 0x02 /* Message Control */
#define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */
#define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */
#define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */
#define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */
#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */
#define PCI_MSI_RFU 3 /* Rest of capability flags */
-#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
-#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
-#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
-#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
-#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */
-#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
-#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
-#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */
+#define PCI_MSI_ADDRESS_LO 0x04 /* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI 0x08 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32 0x08 /* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32 0x0c /* Mask bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32 0x10 /* Pending intrs for 32-bit devices */
+#define PCI_MSI_DATA_64 0x0c /* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_64 0x10 /* Mask bits register for 64-bit devices */
+#define PCI_MSI_PENDING_64 0x14 /* Pending intrs for 64-bit devices */
/* MSI-X registers (in MSI-X capability) */
#define PCI_MSIX_FLAGS 2 /* Message Control */
@@ -335,10 +335,10 @@
/* MSI-X Table entry format (in memory mapped by a BAR) */
#define PCI_MSIX_ENTRY_SIZE 16
-#define PCI_MSIX_ENTRY_LOWER_ADDR 0 /* Message Address */
-#define PCI_MSIX_ENTRY_UPPER_ADDR 4 /* Message Upper Address */
-#define PCI_MSIX_ENTRY_DATA 8 /* Message Data */
-#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 /* Vector Control */
+#define PCI_MSIX_ENTRY_LOWER_ADDR 0x0 /* Message Address */
+#define PCI_MSIX_ENTRY_UPPER_ADDR 0x4 /* Message Upper Address */
+#define PCI_MSIX_ENTRY_DATA 0x8 /* Message Data */
+#define PCI_MSIX_ENTRY_VECTOR_CTRL 0xc /* Vector Control */
#define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001
/* CompactPCI Hotswap Register */
@@ -470,7 +470,7 @@
/* PCI Express capability registers */
-#define PCI_EXP_FLAGS 2 /* Capabilities register */
+#define PCI_EXP_FLAGS 0x02 /* Capabilities register */
#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */
#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */
#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */
@@ -484,7 +484,7 @@
#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
-#define PCI_EXP_DEVCAP 4 /* Device capabilities */
+#define PCI_EXP_DEVCAP 0x04 /* Device capabilities */
#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */
#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */
#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */
@@ -497,7 +497,7 @@
#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */
#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */
#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
-#define PCI_EXP_DEVCTL 8 /* Device Control */
+#define PCI_EXP_DEVCTL 0x08 /* Device Control */
#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */
#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */
@@ -522,7 +522,7 @@
#define PCI_EXP_DEVCTL_READRQ_2048B 0x4000 /* 2048 Bytes */
#define PCI_EXP_DEVCTL_READRQ_4096B 0x5000 /* 4096 Bytes */
#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
-#define PCI_EXP_DEVSTA 10 /* Device Status */
+#define PCI_EXP_DEVSTA 0x0a /* Device Status */
#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */
#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */
#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */
@@ -530,7 +530,7 @@
#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */
#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */
#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */
-#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
+#define PCI_EXP_LNKCAP 0x0c /* Link Capabilities */
#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
@@ -549,7 +549,7 @@
#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
-#define PCI_EXP_LNKCTL 16 /* Link Control */
+#define PCI_EXP_LNKCTL 0x10 /* Link Control */
#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */
#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */
@@ -562,7 +562,7 @@
#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */
-#define PCI_EXP_LNKSTA 18 /* Link Status */
+#define PCI_EXP_LNKSTA 0x12 /* Link Status */
#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
@@ -582,7 +582,7 @@
#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints with link end here */
-#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
+#define PCI_EXP_SLTCAP 0x14 /* Slot Capabilities */
#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */
@@ -595,7 +595,7 @@
#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */
#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */
#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
-#define PCI_EXP_SLTCTL 24 /* Slot Control */
+#define PCI_EXP_SLTCTL 0x18 /* Slot Control */
#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */
#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */
#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */
@@ -617,7 +617,7 @@
#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
#define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */
-#define PCI_EXP_SLTSTA 26 /* Slot Status */
+#define PCI_EXP_SLTSTA 0x1a /* Slot Status */
#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */
#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */
@@ -627,15 +627,15 @@
#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */
#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
-#define PCI_EXP_RTCTL 28 /* Root Control */
+#define PCI_EXP_RTCTL 0x1c /* Root Control */
#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */
#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */
#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */
#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */
#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */
-#define PCI_EXP_RTCAP 30 /* Root Capabilities */
+#define PCI_EXP_RTCAP 0x1e /* Root Capabilities */
#define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */
-#define PCI_EXP_RTSTA 32 /* Root Status */
+#define PCI_EXP_RTSTA 0x20 /* Root Status */
#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */
#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */
/*
@@ -646,7 +646,7 @@
* Use pcie_capability_read_word() and similar interfaces to use them
* safely.
*/
-#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
+#define PCI_EXP_DEVCAP2 0x24 /* Device Capabilities 2 */
#define PCI_EXP_DEVCAP2_COMP_TMOUT_DIS 0x00000010 /* Completion Timeout Disable supported */
#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */
#define PCI_EXP_DEVCAP2_ATOMIC_ROUTE 0x00000040 /* Atomic Op routing */
@@ -658,7 +658,7 @@
#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */
#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */
-#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
+#define PCI_EXP_DEVCTL2 0x28 /* Device Control 2 */
#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
#define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */
#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */
@@ -670,9 +670,9 @@
#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */
#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */
#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
-#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */
-#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */
-#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */
+#define PCI_EXP_DEVSTA2 0x2a /* Device Status 2 */
+#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 0x2c /* end of v2 EPs w/o link */
+#define PCI_EXP_LNKCAP2 0x2c /* Link Capabilities 2 */
#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */
#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */
#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */
@@ -680,7 +680,7 @@
#define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */
#define PCI_EXP_LNKCAP2_SLS_64_0GB 0x00000040 /* Supported Speed 64GT/s */
#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
-#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
+#define PCI_EXP_LNKCTL2 0x30 /* Link Control 2 */
#define PCI_EXP_LNKCTL2_TLS 0x000f
#define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */
#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */
@@ -691,12 +691,12 @@
#define PCI_EXP_LNKCTL2_ENTER_COMP 0x0010 /* Enter Compliance */
#define PCI_EXP_LNKCTL2_TX_MARGIN 0x0380 /* Transmit Margin */
#define PCI_EXP_LNKCTL2_HASD 0x0020 /* HW Autonomous Speed Disable */
-#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
-#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
+#define PCI_EXP_LNKSTA2 0x32 /* Link Status 2 */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 0x32 /* end of v2 EPs w/ link */
+#define PCI_EXP_SLTCAP2 0x34 /* Slot Capabilities 2 */
#define PCI_EXP_SLTCAP2_IBPD 0x00000001 /* In-band PD Disable Supported */
-#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
-#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
+#define PCI_EXP_SLTCTL2 0x38 /* Slot Control 2 */
+#define PCI_EXP_SLTSTA2 0x3a /* Slot Status 2 */
/* Extended Capabilities (PCI-X 2.0 and Express) */
#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
@@ -742,7 +742,7 @@
#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
/* Advanced Error Reporting */
-#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
+#define PCI_ERR_UNCOR_STATUS 0x04 /* Uncorrectable Error Status */
#define PCI_ERR_UNC_UND 0x00000001 /* Undefined */
#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */
@@ -760,11 +760,11 @@
#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */
#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */
#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */
-#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
+#define PCI_ERR_UNCOR_MASK 0x08 /* Uncorrectable Error Mask */
/* Same bits as above */
-#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
+#define PCI_ERR_UNCOR_SEVER 0x0c /* Uncorrectable Error Severity */
/* Same bits as above */
-#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */
+#define PCI_ERR_COR_STATUS 0x10 /* Correctable Error Status */
#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */
#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
@@ -773,20 +773,20 @@
#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */
#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */
#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */
-#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
+#define PCI_ERR_COR_MASK 0x14 /* Correctable Error Mask */
/* Same bits as above */
-#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
-#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */
+#define PCI_ERR_CAP 0x18 /* Advanced Error Capabilities & Ctrl*/
+#define PCI_ERR_CAP_FEP(x) ((x) & 0x1f) /* First Error Pointer */
#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */
#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */
#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */
#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */
-#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */
-#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */
+#define PCI_ERR_HEADER_LOG 0x1c /* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND 0x2c /* Root Error Command */
#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */
#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */
#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_STATUS 48
+#define PCI_ERR_ROOT_STATUS 0x30
#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */
#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */
@@ -795,52 +795,52 @@
#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */
#define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */
-#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */
+#define PCI_ERR_ROOT_ERR_SRC 0x34 /* Error Source Identification */
/* Virtual Channel */
-#define PCI_VC_PORT_CAP1 4
+#define PCI_VC_PORT_CAP1 0x04
#define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */
#define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */
#define PCI_VC_CAP1_ARB_SIZE 0x00000c00
-#define PCI_VC_PORT_CAP2 8
+#define PCI_VC_PORT_CAP2 0x08
#define PCI_VC_CAP2_32_PHASE 0x00000002
#define PCI_VC_CAP2_64_PHASE 0x00000004
#define PCI_VC_CAP2_128_PHASE 0x00000008
#define PCI_VC_CAP2_ARB_OFF 0xff000000
-#define PCI_VC_PORT_CTRL 12
+#define PCI_VC_PORT_CTRL 0x0c
#define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001
-#define PCI_VC_PORT_STATUS 14
+#define PCI_VC_PORT_STATUS 0x0e
#define PCI_VC_PORT_STATUS_TABLE 0x00000001
-#define PCI_VC_RES_CAP 16
+#define PCI_VC_RES_CAP 0x10
#define PCI_VC_RES_CAP_32_PHASE 0x00000002
#define PCI_VC_RES_CAP_64_PHASE 0x00000004
#define PCI_VC_RES_CAP_128_PHASE 0x00000008
#define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010
#define PCI_VC_RES_CAP_256_PHASE 0x00000020
#define PCI_VC_RES_CAP_ARB_OFF 0xff000000
-#define PCI_VC_RES_CTRL 20
+#define PCI_VC_RES_CTRL 0x14
#define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000
#define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000
#define PCI_VC_RES_CTRL_ID 0x07000000
#define PCI_VC_RES_CTRL_ENABLE 0x80000000
-#define PCI_VC_RES_STATUS 26
+#define PCI_VC_RES_STATUS 0x1a
#define PCI_VC_RES_STATUS_TABLE 0x00000001
#define PCI_VC_RES_STATUS_NEGO 0x00000002
#define PCI_CAP_VC_BASE_SIZEOF 0x10
-#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C
+#define PCI_CAP_VC_PER_VC_SIZEOF 0x0c
/* Power Budgeting */
-#define PCI_PWR_DSR 4 /* Data Select Register */
-#define PCI_PWR_DATA 8 /* Data Register */
+#define PCI_PWR_DSR 0x04 /* Data Select Register */
+#define PCI_PWR_DATA 0x08 /* Data Register */
#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */
#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */
#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */
#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */
#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
-#define PCI_PWR_CAP 12 /* Capability */
+#define PCI_PWR_CAP 0x0c /* Capability */
#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
-#define PCI_EXT_CAP_PWR_SIZEOF 16
+#define PCI_EXT_CAP_PWR_SIZEOF 0x10
/* Root Complex Event Collector Endpoint Association */
#define PCI_RCEC_RCIEP_BITMAP 4 /* Associated Bitmap for RCiEPs */
@@ -964,7 +964,7 @@
#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
-#define PCI_EXT_CAP_SRIOV_SIZEOF 64
+#define PCI_EXT_CAP_SRIOV_SIZEOF 0x40
#define PCI_LTR_MAX_SNOOP_LAT 0x4
#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
@@ -1017,12 +1017,12 @@
#define PCI_TPH_LOC_NONE 0x000 /* no location */
#define PCI_TPH_LOC_CAP 0x200 /* in capability */
#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */
-#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */
-#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */
-#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */
+#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* ST table mask */
+#define PCI_TPH_CAP_ST_SHIFT 16 /* ST table shift */
+#define PCI_TPH_BASE_SIZEOF 0xc /* size with no ST table */
/* Downstream Port Containment */
-#define PCI_EXP_DPC_CAP 4 /* DPC Capability */
+#define PCI_EXP_DPC_CAP 0x04 /* DPC Capability */
#define PCI_EXP_DPC_IRQ 0x001F /* Interrupt Message Number */
#define PCI_EXP_DPC_CAP_RP_EXT 0x0020 /* Root Port Extensions */
#define PCI_EXP_DPC_CAP_POISONED_TLP 0x0040 /* Poisoned TLP Egress Blocking Supported */
@@ -1030,19 +1030,19 @@
#define PCI_EXP_DPC_RP_PIO_LOG_SIZE 0x0F00 /* RP PIO Log Size */
#define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */
-#define PCI_EXP_DPC_CTL 6 /* DPC control */
+#define PCI_EXP_DPC_CTL 0x06 /* DPC control */
#define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */
#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */
#define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */
-#define PCI_EXP_DPC_STATUS 8 /* DPC Status */
+#define PCI_EXP_DPC_STATUS 0x08 /* DPC Status */
#define PCI_EXP_DPC_STATUS_TRIGGER 0x0001 /* Trigger Status */
#define PCI_EXP_DPC_STATUS_TRIGGER_RSN 0x0006 /* Trigger Reason */
#define PCI_EXP_DPC_STATUS_INTERRUPT 0x0008 /* Interrupt Status */
#define PCI_EXP_DPC_RP_BUSY 0x0010 /* Root Port Busy */
#define PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT 0x0060 /* Trig Reason Extension */
-#define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */
+#define PCI_EXP_DPC_SOURCE_ID 0x0A /* DPC Source Identifier */
#define PCI_EXP_DPC_RP_PIO_STATUS 0x0C /* RP PIO Status */
#define PCI_EXP_DPC_RP_PIO_MASK 0x10 /* RP PIO Mask */
@@ -1086,7 +1086,11 @@
/* Designated Vendor-Specific (DVSEC, PCI_EXT_CAP_ID_DVSEC) */
#define PCI_DVSEC_HEADER1 0x4 /* Designated Vendor-Specific Header1 */
+#define PCI_DVSEC_HEADER1_VID(x) ((x) & 0xffff)
+#define PCI_DVSEC_HEADER1_REV(x) (((x) >> 16) & 0xf)
+#define PCI_DVSEC_HEADER1_LEN(x) (((x) >> 20) & 0xfff)
#define PCI_DVSEC_HEADER2 0x8 /* Designated Vendor-Specific Header2 */
+#define PCI_DVSEC_HEADER2_ID(x) ((x) & 0xffff)
/* Data Link Feature */
#define PCI_DLF_CAP 0x04 /* Capabilities Register */
new file mode 100644
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _LINUX_VIRTIO_GPIO_H
+#define _LINUX_VIRTIO_GPIO_H
+
+#include "standard-headers/linux/types.h"
+
+/* Virtio GPIO Feature bits */
+#define VIRTIO_GPIO_F_IRQ 0
+
+/* Virtio GPIO request types */
+#define VIRTIO_GPIO_MSG_GET_NAMES 0x0001
+#define VIRTIO_GPIO_MSG_GET_DIRECTION 0x0002
+#define VIRTIO_GPIO_MSG_SET_DIRECTION 0x0003
+#define VIRTIO_GPIO_MSG_GET_VALUE 0x0004
+#define VIRTIO_GPIO_MSG_SET_VALUE 0x0005
+#define VIRTIO_GPIO_MSG_IRQ_TYPE 0x0006
+
+/* Possible values of the status field */
+#define VIRTIO_GPIO_STATUS_OK 0x0
+#define VIRTIO_GPIO_STATUS_ERR 0x1
+
+/* Direction types */
+#define VIRTIO_GPIO_DIRECTION_NONE 0x00
+#define VIRTIO_GPIO_DIRECTION_OUT 0x01
+#define VIRTIO_GPIO_DIRECTION_IN 0x02
+
+/* Virtio GPIO IRQ types */
+#define VIRTIO_GPIO_IRQ_TYPE_NONE 0x00
+#define VIRTIO_GPIO_IRQ_TYPE_EDGE_RISING 0x01
+#define VIRTIO_GPIO_IRQ_TYPE_EDGE_FALLING 0x02
+#define VIRTIO_GPIO_IRQ_TYPE_EDGE_BOTH 0x03
+#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_HIGH 0x04
+#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_LOW 0x08
+
+struct virtio_gpio_config {
+ uint16_t ngpio;
+ uint8_t padding[2];
+ uint32_t gpio_names_size;
+};
+
+/* Virtio GPIO Request / Response */
+struct virtio_gpio_request {
+ uint16_t type;
+ uint16_t gpio;
+ uint32_t value;
+};
+
+struct virtio_gpio_response {
+ uint8_t status;
+ uint8_t value;
+};
+
+struct virtio_gpio_response_get_names {
+ uint8_t status;
+ uint8_t value[];
+};
+
+/* Virtio GPIO IRQ Request / Response */
+struct virtio_gpio_irq_request {
+ uint16_t gpio;
+};
+
+struct virtio_gpio_irq_response {
+ uint8_t status;
+};
+
+/* Possible values of the interrupt status field */
+#define VIRTIO_GPIO_IRQ_STATUS_INVALID 0x0
+#define VIRTIO_GPIO_IRQ_STATUS_VALID 0x1
+
+#endif /* _LINUX_VIRTIO_GPIO_H */
new file mode 100644
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */
+/*
+ * Definitions for virtio I2C Adpter
+ *
+ * Copyright (c) 2021 Intel Corporation. All rights reserved.
+ */
+
+#ifndef _LINUX_VIRTIO_I2C_H
+#define _LINUX_VIRTIO_I2C_H
+
+#include "standard-headers/linux/const.h"
+#include "standard-headers/linux/types.h"
+
+/* Virtio I2C Feature bits */
+#define VIRTIO_I2C_F_ZERO_LENGTH_REQUEST 0
+
+/* The bit 0 of the @virtio_i2c_out_hdr.@flags, used to group the requests */
+#define VIRTIO_I2C_FLAGS_FAIL_NEXT _BITUL(0)
+
+/* The bit 1 of the @virtio_i2c_out_hdr.@flags, used to mark a buffer as read */
+#define VIRTIO_I2C_FLAGS_M_RD _BITUL(1)
+
+/**
+ * struct virtio_i2c_out_hdr - the virtio I2C message OUT header
+ * @addr: the controlled device address
+ * @padding: used to pad to full dword
+ * @flags: used for feature extensibility
+ */
+struct virtio_i2c_out_hdr {
+ uint16_t addr;
+ uint16_t padding;
+ uint32_t flags;
+};
+
+/**
+ * struct virtio_i2c_in_hdr - the virtio I2C message IN header
+ * @status: the processing result from the backend
+ */
+struct virtio_i2c_in_hdr {
+ uint8_t status;
+};
+
+/* The final status written by the device */
+#define VIRTIO_I2C_MSG_OK 0
+#define VIRTIO_I2C_MSG_ERR 1
+
+#endif /* _LINUX_VIRTIO_I2C_H */
@@ -16,6 +16,7 @@
#define VIRTIO_IOMMU_F_BYPASS 3
#define VIRTIO_IOMMU_F_PROBE 4
#define VIRTIO_IOMMU_F_MMIO 5
+#define VIRTIO_IOMMU_F_BYPASS_CONFIG 6
struct virtio_iommu_range_64 {
uint64_t start;
@@ -36,6 +37,8 @@ struct virtio_iommu_config {
struct virtio_iommu_range_32 domain_range;
/* Probe buffer size */
uint32_t probe_size;
+ uint8_t bypass;
+ uint8_t reserved[3];
};
/* Request types */
@@ -66,11 +69,14 @@ struct virtio_iommu_req_tail {
uint8_t reserved[3];
};
+#define VIRTIO_IOMMU_ATTACH_F_BYPASS (1 << 0)
+
struct virtio_iommu_req_attach {
struct virtio_iommu_req_head head;
uint32_t domain;
uint32_t endpoint;
- uint8_t reserved[8];
+ uint32_t flags;
+ uint8_t reserved[4];
struct virtio_iommu_req_tail tail;
};
new file mode 100644
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2021 Intel Corporation
+ * Author: Johannes Berg <johannes@sipsolutions.net>
+ */
+#ifndef _LINUX_VIRTIO_PCIDEV_H
+#define _LINUX_VIRTIO_PCIDEV_H
+#include "standard-headers/linux/types.h"
+
+/**
+ * enum virtio_pcidev_ops - virtual PCI device operations
+ * @VIRTIO_PCIDEV_OP_RESERVED: reserved to catch errors
+ * @VIRTIO_PCIDEV_OP_CFG_READ: read config space, size is 1, 2, 4 or 8;
+ * the @data field should be filled in by the device (in little endian).
+ * @VIRTIO_PCIDEV_OP_CFG_WRITE: write config space, size is 1, 2, 4 or 8;
+ * the @data field contains the data to write (in little endian).
+ * @VIRTIO_PCIDEV_OP_MMIO_READ: read BAR mem/pio, size can be variable;
+ * the @data field should be filled in by the device (in little endian).
+ * @VIRTIO_PCIDEV_OP_MMIO_WRITE: write BAR mem/pio, size can be variable;
+ * the @data field contains the data to write (in little endian).
+ * @VIRTIO_PCIDEV_OP_MMIO_MEMSET: memset MMIO, size is variable but
+ * the @data field only has one byte (unlike @VIRTIO_PCIDEV_OP_MMIO_WRITE)
+ * @VIRTIO_PCIDEV_OP_INT: legacy INTx# pin interrupt, the addr field is 1-4 for
+ * the number
+ * @VIRTIO_PCIDEV_OP_MSI: MSI(-X) interrupt, this message basically transports
+ * the 16- or 32-bit write that would otherwise be done into memory,
+ * analogous to the write messages (@VIRTIO_PCIDEV_OP_MMIO_WRITE) above
+ * @VIRTIO_PCIDEV_OP_PME: Dummy message whose content is ignored (and should be
+ * all zeroes) to signal the PME# pin.
+ */
+enum virtio_pcidev_ops {
+ VIRTIO_PCIDEV_OP_RESERVED = 0,
+ VIRTIO_PCIDEV_OP_CFG_READ,
+ VIRTIO_PCIDEV_OP_CFG_WRITE,
+ VIRTIO_PCIDEV_OP_MMIO_READ,
+ VIRTIO_PCIDEV_OP_MMIO_WRITE,
+ VIRTIO_PCIDEV_OP_MMIO_MEMSET,
+ VIRTIO_PCIDEV_OP_INT,
+ VIRTIO_PCIDEV_OP_MSI,
+ VIRTIO_PCIDEV_OP_PME,
+};
+
+/**
+ * struct virtio_pcidev_msg - virtio PCI device operation
+ * @op: the operation to do
+ * @bar: the bar (only with BAR read/write messages)
+ * @reserved: reserved
+ * @size: the size of the read/write (in bytes)
+ * @addr: the address to read/write
+ * @data: the data, normally @size long, but just one byte for
+ * %VIRTIO_PCIDEV_OP_MMIO_MEMSET
+ *
+ * Note: the fields are all in native (CPU) endian, however, the
+ * @data values will often be in little endian (see the ops above.)
+ */
+struct virtio_pcidev_msg {
+ uint8_t op;
+ uint8_t bar;
+ uint16_t reserved;
+ uint32_t size;
+ uint64_t addr;
+ uint8_t data[];
+};
+
+#endif /* _LINUX_VIRTIO_PCIDEV_H */
new file mode 100644
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020-2021 OpenSynergy GmbH
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#ifndef _LINUX_VIRTIO_SCMI_H
+#define _LINUX_VIRTIO_SCMI_H
+
+#include "standard-headers/linux/virtio_types.h"
+
+/* Device implements some SCMI notifications, or delayed responses. */
+#define VIRTIO_SCMI_F_P2A_CHANNELS 0
+
+/* Device implements any SCMI statistics shared memory region */
+#define VIRTIO_SCMI_F_SHARED_MEMORY 1
+
+/* Virtqueues */
+
+#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */
+#define VIRTIO_SCMI_VQ_RX 1 /* eventq */
+#define VIRTIO_SCMI_VQ_MAX_CNT 2
+
+#endif /* _LINUX_VIRTIO_SCMI_H */
@@ -883,8 +883,11 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease)
#define __NR_futex_waitv 449
__SYSCALL(__NR_futex_waitv, sys_futex_waitv)
+#define __NR_set_mempolicy_home_node 450
+__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
+
#undef __NR_syscalls
-#define __NR_syscalls 450
+#define __NR_syscalls 451
/*
* 32 bit systems traditionally used different
@@ -377,5 +377,7 @@
#define __NR_landlock_add_rule (__NR_Linux + 445)
#define __NR_landlock_restrict_self (__NR_Linux + 446)
#define __NR_process_mrelease (__NR_Linux + 448)
+#define __NR_futex_waitv (__NR_Linux + 449)
+#define __NR_set_mempolicy_home_node (__NR_Linux + 450)
#endif /* _ASM_UNISTD_N32_H */
@@ -353,5 +353,7 @@
#define __NR_landlock_add_rule (__NR_Linux + 445)
#define __NR_landlock_restrict_self (__NR_Linux + 446)
#define __NR_process_mrelease (__NR_Linux + 448)
+#define __NR_futex_waitv (__NR_Linux + 449)
+#define __NR_set_mempolicy_home_node (__NR_Linux + 450)
#endif /* _ASM_UNISTD_N64_H */
@@ -423,5 +423,7 @@
#define __NR_landlock_add_rule (__NR_Linux + 445)
#define __NR_landlock_restrict_self (__NR_Linux + 446)
#define __NR_process_mrelease (__NR_Linux + 448)
+#define __NR_futex_waitv (__NR_Linux + 449)
+#define __NR_set_mempolicy_home_node (__NR_Linux + 450)
#endif /* _ASM_UNISTD_O32_H */
@@ -430,6 +430,8 @@
#define __NR_landlock_add_rule 445
#define __NR_landlock_restrict_self 446
#define __NR_process_mrelease 448
+#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#endif /* _ASM_UNISTD_32_H */
@@ -402,6 +402,8 @@
#define __NR_landlock_add_rule 445
#define __NR_landlock_restrict_self 446
#define __NR_process_mrelease 448
+#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#endif /* _ASM_UNISTD_64_H */
new file mode 100644
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Copyright (C) 2015 Regents of the University of California
+ */
+
+#ifndef _ASM_RISCV_BITSPERLONG_H
+#define _ASM_RISCV_BITSPERLONG_H
+
+#define __BITS_PER_LONG (__SIZEOF_POINTER__ * 8)
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* _ASM_RISCV_BITSPERLONG_H */
new file mode 100644
@@ -0,0 +1 @@
+#include <asm-generic/mman.h>
new file mode 100644
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2018 David Abdurachmanov <david.abdurachmanov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#ifdef __LP64__
+#define __ARCH_WANT_NEW_STAT
+#define __ARCH_WANT_SET_GET_RLIMIT
+#endif /* __LP64__ */
+
+#define __ARCH_WANT_SYS_CLONE3
+
+#include <asm-generic/unistd.h>
+
+/*
+ * Allows the instruction cache to be flushed from userspace. Despite RISC-V
+ * having a direct 'fence.i' instruction available to userspace (which we
+ * can't trap!), that's not actually viable when running on Linux because the
+ * kernel might schedule a process on another hart. There is no way for
+ * userspace to handle this without invoking the kernel (as it doesn't know the
+ * thread->hart mappings), so we've defined a RISC-V specific system call to
+ * flush the instruction cache.
+ *
+ * __NR_riscv_flush_icache is defined to flush the instruction cache over an
+ * address range, with the flush applying to either all threads or just the
+ * caller. We don't currently do anything with the address range, that's just
+ * in there for forwards compatibility.
+ */
+#ifndef __NR_riscv_flush_icache
+#define __NR_riscv_flush_icache (__NR_arch_specific_syscall + 15)
+#endif
+__SYSCALL(__NR_riscv_flush_icache, sys_riscv_flush_icache)
@@ -420,5 +420,7 @@
#define __NR_landlock_add_rule 445
#define __NR_landlock_restrict_self 446
#define __NR_process_mrelease 448
+#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#endif /* _ASM_S390_UNISTD_32_H */
@@ -368,5 +368,7 @@
#define __NR_landlock_add_rule 445
#define __NR_landlock_restrict_self 446
#define __NR_process_mrelease 448
+#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#endif /* _ASM_S390_UNISTD_64_H */
@@ -373,9 +373,23 @@ struct kvm_debugregs {
__u64 reserved[9];
};
-/* for KVM_CAP_XSAVE */
+/* for KVM_CAP_XSAVE and KVM_CAP_XSAVE2 */
struct kvm_xsave {
+ /*
+ * KVM_GET_XSAVE2 and KVM_SET_XSAVE write and read as many bytes
+ * as are returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2)
+ * respectively, when invoked on the vm file descriptor.
+ *
+ * The size value returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2)
+ * will always be at least 4096. Currently, it is only greater
+ * than 4096 if a dynamic feature has been enabled with
+ * ``arch_prctl()``, but this may change in the future.
+ *
+ * The offsets of the state save areas in struct kvm_xsave follow
+ * the contents of CPUID leaf 0xD on the host.
+ */
__u32 region[1024];
+ __u32 extra[0];
};
#define KVM_MAX_XCRS 16
@@ -440,6 +440,7 @@
#define __NR_memfd_secret 447
#define __NR_process_mrelease 448
#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#endif /* _ASM_UNISTD_32_H */
@@ -362,6 +362,7 @@
#define __NR_memfd_secret 447
#define __NR_process_mrelease 448
#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#endif /* _ASM_UNISTD_64_H */
@@ -315,6 +315,7 @@
#define __NR_memfd_secret (__X32_SYSCALL_BIT + 447)
#define __NR_process_mrelease (__X32_SYSCALL_BIT + 448)
#define __NR_futex_waitv (__X32_SYSCALL_BIT + 449)
+#define __NR_set_mempolicy_home_node (__X32_SYSCALL_BIT + 450)
#define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512)
#define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513)
#define __NR_ioctl (__X32_SYSCALL_BIT + 514)
@@ -1130,6 +1130,9 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_BINARY_STATS_FD 203
#define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204
#define KVM_CAP_ARM_MTE 205
+#define KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 206
+#define KVM_CAP_VM_GPA_BITS 207
+#define KVM_CAP_XSAVE2 208
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1161,11 +1164,20 @@ struct kvm_irq_routing_hv_sint {
__u32 sint;
};
+struct kvm_irq_routing_xen_evtchn {
+ __u32 port;
+ __u32 vcpu;
+ __u32 priority;
+};
+
+#define KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL ((__u32)(-1))
+
/* gsi routing entry types */
#define KVM_IRQ_ROUTING_IRQCHIP 1
#define KVM_IRQ_ROUTING_MSI 2
#define KVM_IRQ_ROUTING_S390_ADAPTER 3
#define KVM_IRQ_ROUTING_HV_SINT 4
+#define KVM_IRQ_ROUTING_XEN_EVTCHN 5
struct kvm_irq_routing_entry {
__u32 gsi;
@@ -1177,6 +1189,7 @@ struct kvm_irq_routing_entry {
struct kvm_irq_routing_msi msi;
struct kvm_irq_routing_s390_adapter adapter;
struct kvm_irq_routing_hv_sint hv_sint;
+ struct kvm_irq_routing_xen_evtchn xen_evtchn;
__u32 pad[8];
} u;
};
@@ -1207,6 +1220,7 @@ struct kvm_x86_mce {
#define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1)
#define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2)
#define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3)
+#define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4)
struct kvm_xen_hvm_config {
__u32 flags;
@@ -1609,6 +1623,9 @@ struct kvm_enc_region {
#define KVM_S390_NORMAL_RESET _IO(KVMIO, 0xc3)
#define KVM_S390_CLEAR_RESET _IO(KVMIO, 0xc4)
+/* Available with KVM_CAP_XSAVE2 */
+#define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave)
+
struct kvm_s390_pv_sec_parm {
__u64 origin;
__u64 length;