@@ -2210,6 +2210,12 @@ F: hw/virtio/vhost-user-gpio*
F: include/hw/virtio/vhost-user-gpio.h
F: tests/qtest/libqos/virtio-gpio.*
+vhost-user-scmi
+R: mzamazal@redhat.com
+S: Supported
+F: hw/virtio/vhost-user-scmi*
+F: include/hw/virtio/vhost-user-scmi.h
+
virtio-crypto
M: Gonglei <arei.gonglei@huawei.com>
S: Supported
@@ -96,3 +96,8 @@ config VHOST_VDPA_DEV
bool
default y
depends on VIRTIO && VHOST_VDPA && LINUX
+
+config VHOST_USER_SCMI
+ bool
+ default y
+ depends on VIRTIO && VHOST_USER
@@ -35,6 +35,7 @@ specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true: files('vhost-user
specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true: files('vhost-user-rng.c'))
specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true: files('vhost-user-gpio.c'))
specific_virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_GPIO'], if_true: files('vhost-user-gpio-pci.c'))
+specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_SCMI', if_true: files('vhost-user-scmi.c'))
virtio_pci_ss = ss.source_set()
virtio_pci_ss.add(when: 'CONFIG_VHOST_VSOCK', if_true: files('vhost-vsock-pci.c'))
new file mode 100644
@@ -0,0 +1,306 @@
+/*
+ * Vhost-user SCMI virtio device
+ *
+ * SPDX-FileCopyrightText: Red Hat, Inc.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Implementation based on other vhost-user devices in QEMU.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "hw/virtio/virtio-bus.h"
+#include "hw/virtio/vhost-user-scmi.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_scmi.h"
+#include "trace.h"
+
+/*
+ * In this version, we don't support VIRTIO_SCMI_F_SHARED_MEMORY.
+ * Note that VIRTIO_SCMI_F_SHARED_MEMORY is currently not supported in
+ * Linux VirtIO SCMI guest driver.
+ */
+static const int feature_bits[] = {
+ VIRTIO_F_VERSION_1,
+ VIRTIO_F_NOTIFY_ON_EMPTY,
+ VIRTIO_RING_F_INDIRECT_DESC,
+ VIRTIO_RING_F_EVENT_IDX,
+ VIRTIO_F_RING_RESET,
+ VIRTIO_SCMI_F_P2A_CHANNELS,
+ VHOST_INVALID_FEATURE_BIT
+};
+
+static int vu_scmi_start(VirtIODevice *vdev)
+{
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ struct vhost_dev *vhost_dev = &scmi->vhost_dev;
+ int ret, i;
+
+ if (!k->set_guest_notifiers) {
+ error_report("binding does not support guest notifiers");
+ return -ENOSYS;
+ }
+
+ ret = vhost_dev_enable_notifiers(vhost_dev, vdev);
+ if (ret < 0) {
+ error_report("Error enabling host notifiers: %d", ret);
+ return ret;
+ }
+
+ ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, true);
+ if (ret < 0) {
+ error_report("Error binding guest notifier: %d", ret);
+ goto err_host_notifiers;
+ }
+
+ vhost_ack_features(&scmi->vhost_dev, feature_bits, vdev->guest_features);
+
+ ret = vhost_dev_start(&scmi->vhost_dev, vdev, true);
+ if (ret < 0) {
+ error_report("Error starting vhost-user-scmi: %d", ret);
+ goto err_guest_notifiers;
+ }
+
+ /*
+ * guest_notifier_mask/pending not used yet, so just unmask
+ * everything here. virtio-pci will do the right thing by
+ * enabling/disabling irqfd.
+ */
+ for (i = 0; i < scmi->vhost_dev.nvqs; i++) {
+ vhost_virtqueue_mask(&scmi->vhost_dev, vdev, i, false);
+ }
+ return 0;
+
+err_guest_notifiers:
+ k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false);
+err_host_notifiers:
+ vhost_dev_disable_notifiers(vhost_dev, vdev);
+
+ return ret;
+}
+
+static void vu_scmi_stop(VirtIODevice *vdev)
+{
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ struct vhost_dev *vhost_dev = &scmi->vhost_dev;
+ int ret;
+
+ if (!k->set_guest_notifiers) {
+ return;
+ }
+
+ vhost_dev_stop(vhost_dev, vdev, true);
+
+ ret = k->set_guest_notifiers(qbus->parent, vhost_dev->nvqs, false);
+ if (ret < 0) {
+ error_report("vhost guest notifier cleanup failed: %d", ret);
+ return;
+ }
+ vhost_dev_disable_notifiers(vhost_dev, vdev);
+}
+
+static void vu_scmi_set_status(VirtIODevice *vdev, uint8_t status)
+{
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+ bool should_start = virtio_device_should_start(vdev, status);
+
+ if (!scmi->connected) {
+ return;
+ }
+ if (vhost_dev_is_started(&scmi->vhost_dev) == should_start) {
+ return;
+ }
+
+ if (should_start) {
+ vu_scmi_start(vdev);
+ } else {
+ vu_scmi_stop(vdev);
+ }
+}
+
+static uint64_t vu_scmi_get_features(VirtIODevice *vdev, uint64_t features,
+ Error **errp)
+{
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+
+ return vhost_get_features(&scmi->vhost_dev, feature_bits, features);
+}
+
+static void vu_scmi_handle_output(VirtIODevice *vdev, VirtQueue *vq)
+{
+ /*
+ * Not normally called; it's the daemon that handles the queue;
+ * however virtio's cleanup path can call this.
+ */
+}
+
+static void vu_scmi_guest_notifier_mask(VirtIODevice *vdev, int idx, bool mask)
+{
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+
+ if (idx == VIRTIO_CONFIG_IRQ_IDX) {
+ return;
+ }
+
+ vhost_virtqueue_mask(&scmi->vhost_dev, vdev, idx, mask);
+}
+
+static bool vu_scmi_guest_notifier_pending(VirtIODevice *vdev, int idx)
+{
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+
+ return vhost_virtqueue_pending(&scmi->vhost_dev, idx);
+}
+
+static void vu_scmi_connect(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+
+ if (scmi->connected) {
+ return;
+ }
+ scmi->connected = true;
+
+ /* restore vhost state */
+ if (virtio_device_started(vdev, vdev->status)) {
+ vu_scmi_start(vdev);
+ }
+}
+
+static void vu_scmi_disconnect(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(vdev);
+
+ if (!scmi->connected) {
+ return;
+ }
+ scmi->connected = false;
+
+ if (vhost_dev_is_started(&scmi->vhost_dev)) {
+ vu_scmi_stop(vdev);
+ }
+}
+
+static void vu_scmi_event(void *opaque, QEMUChrEvent event)
+{
+ DeviceState *dev = opaque;
+
+ switch (event) {
+ case CHR_EVENT_OPENED:
+ vu_scmi_connect(dev);
+ break;
+ case CHR_EVENT_CLOSED:
+ vu_scmi_disconnect(dev);
+ break;
+ case CHR_EVENT_BREAK:
+ case CHR_EVENT_MUX_IN:
+ case CHR_EVENT_MUX_OUT:
+ /* Ignore */
+ break;
+ }
+}
+
+static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserSCMI *scmi)
+{
+ virtio_delete_queue(scmi->cmd_vq);
+ virtio_delete_queue(scmi->event_vq);
+ g_free(scmi->vhost_dev.vqs);
+ virtio_cleanup(vdev);
+ vhost_user_cleanup(&scmi->vhost_user);
+}
+
+static void vu_scmi_device_realize(DeviceState *dev, Error **errp)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(dev);
+ int ret;
+
+ if (!scmi->chardev.chr) {
+ error_setg(errp, "vhost-user-scmi: chardev is mandatory");
+ return;
+ }
+
+ vdev->host_features |= (1ULL << VIRTIO_SCMI_F_P2A_CHANNELS);
+
+ if (!vhost_user_init(&scmi->vhost_user, &scmi->chardev, errp)) {
+ return;
+ }
+
+ virtio_init(vdev, VIRTIO_ID_SCMI, 0);
+
+ scmi->cmd_vq = virtio_add_queue(vdev, 256, vu_scmi_handle_output);
+ scmi->event_vq = virtio_add_queue(vdev, 256, vu_scmi_handle_output);
+ scmi->vhost_dev.nvqs = 2;
+ scmi->vhost_dev.vqs = g_new0(struct vhost_virtqueue, scmi->vhost_dev.nvqs);
+
+ ret = vhost_dev_init(&scmi->vhost_dev, &scmi->vhost_user,
+ VHOST_BACKEND_TYPE_USER, 0, errp);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret,
+ "vhost-user-scmi: vhost_dev_init() failed");
+ do_vhost_user_cleanup(vdev, scmi);
+ return;
+ }
+
+ qemu_chr_fe_set_handlers(&scmi->chardev, NULL, NULL, vu_scmi_event, NULL,
+ dev, NULL, true);
+
+ return;
+}
+
+static void vu_scmi_device_unrealize(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserSCMI *scmi = VHOST_USER_SCMI(dev);
+
+ vu_scmi_set_status(vdev, 0);
+ vhost_dev_cleanup(&scmi->vhost_dev);
+ do_vhost_user_cleanup(vdev, scmi);
+}
+
+static const VMStateDescription vu_scmi_vmstate = {
+ .name = "vhost-user-scmi",
+ .unmigratable = 1,
+};
+
+static Property vu_scmi_properties[] = {
+ DEFINE_PROP_CHR("chardev", VHostUserSCMI, chardev),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void vu_scmi_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+ device_class_set_props(dc, vu_scmi_properties);
+ dc->vmsd = &vu_scmi_vmstate;
+ set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+ vdc->realize = vu_scmi_device_realize;
+ vdc->unrealize = vu_scmi_device_unrealize;
+ vdc->get_features = vu_scmi_get_features;
+ vdc->set_status = vu_scmi_set_status;
+ vdc->guest_notifier_mask = vu_scmi_guest_notifier_mask;
+ vdc->guest_notifier_pending = vu_scmi_guest_notifier_pending;
+}
+
+static const TypeInfo vu_scmi_info = {
+ .name = TYPE_VHOST_USER_SCMI,
+ .parent = TYPE_VIRTIO_DEVICE,
+ .instance_size = sizeof(VHostUserSCMI),
+ .class_init = vu_scmi_class_init,
+};
+
+static void vu_scmi_register_types(void)
+{
+ type_register_static(&vu_scmi_info);
+}
+
+type_init(vu_scmi_register_types)
new file mode 100644
@@ -0,0 +1,30 @@
+/*
+ * Vhost-user SCMI virtio device
+ *
+ * Copyright (c) 2023 Red Hat, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef _QEMU_VHOST_USER_SCMI_H
+#define _QEMU_VHOST_USER_SCMI_H
+
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/vhost.h"
+#include "hw/virtio/vhost-user.h"
+
+#define TYPE_VHOST_USER_SCMI "vhost-user-scmi"
+OBJECT_DECLARE_SIMPLE_TYPE(VHostUserSCMI, VHOST_USER_SCMI);
+
+struct VHostUserSCMI {
+ VirtIODevice parent;
+ CharBackend chardev;
+ struct vhost_virtqueue *vhost_vqs;
+ struct vhost_dev vhost_dev;
+ VhostUserState vhost_user;
+ VirtQueue *cmd_vq;
+ VirtQueue *event_vq;
+ bool connected;
+};
+
+#endif /* _QEMU_VHOST_USER_SCMI_H */
This creates the QEMU side of the vhost-user-scmi device which connects to the remote daemon. It is based on code of similar vhost-user devices. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> --- MAINTAINERS | 6 + hw/virtio/Kconfig | 5 + hw/virtio/meson.build | 1 + hw/virtio/vhost-user-scmi.c | 306 ++++++++++++++++++++++++++++ include/hw/virtio/vhost-user-scmi.h | 30 +++ 5 files changed, 348 insertions(+) create mode 100644 hw/virtio/vhost-user-scmi.c create mode 100644 include/hw/virtio/vhost-user-scmi.h