| Message ID | 20230915115535.129834-4-quic_llindhol@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Refactor PPI logic/definitions for virt/sbsa-ref | expand |
On Fri, 15 Sept 2023 at 12:55, Leif Lindholm <quic_llindhol@quicinc.com> wrote: > > Use the private peripheral interrupt definitions from bsa.h instead of > defining them locally. Refactor to use PPI() to convert from INTID macro > where necessary. > > Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> > --- > hw/arm/sbsa-ref.c | 23 +++++++++++------------ > 1 file changed, 11 insertions(+), 12 deletions(-) > > diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c > index bc89eb4806..3a4ea4dfdd 100644 > --- a/hw/arm/sbsa-ref.c > +++ b/hw/arm/sbsa-ref.c > @@ -2,6 +2,7 @@ > * ARM SBSA Reference Platform emulation > * > * Copyright (c) 2018 Linaro Limited > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > * Written by Hongbo Zhang <hongbo.zhang@linaro.org> > * > * This program is free software; you can redistribute it and/or modify it > @@ -30,6 +31,7 @@ > #include "exec/hwaddr.h" > #include "kvm_arm.h" > #include "hw/arm/boot.h" > +#include "hw/arm/bsa.h" > #include "hw/arm/fdt.h" > #include "hw/arm/smmuv3.h" > #include "hw/block/flash.h" > @@ -55,13 +57,6 @@ > #define NUM_SMMU_IRQS 4 > #define NUM_SATA_PORTS 6 > > -#define VIRTUAL_PMU_IRQ 7 > -#define ARCH_GIC_MAINT_IRQ 9 > -#define ARCH_TIMER_VIRT_IRQ 11 > -#define ARCH_TIMER_S_EL1_IRQ 13 > -#define ARCH_TIMER_NS_EL1_IRQ 14 > -#define ARCH_TIMER_NS_EL2_IRQ 10 > - > enum { > SBSA_FLASH, > SBSA_MEM, > @@ -494,15 +489,19 @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) > for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { > qdev_connect_gpio_out(cpudev, irq, > qdev_get_gpio_in(sms->gic, > - ppibase + timer_irq[irq])); > + ppibase > + + PPI(timer_irq[irq]))); > } > > qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, > - qdev_get_gpio_in(sms->gic, ppibase > - + ARCH_GIC_MAINT_IRQ)); > + qdev_get_gpio_in(sms->gic, > + ppibase > + + PPI(ARCH_GIC_MAINT_IRQ))); > + > qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, > - qdev_get_gpio_in(sms->gic, ppibase > - + VIRTUAL_PMU_IRQ)); > + qdev_get_gpio_in(sms->gic, > + ppibase > + + PPI(VIRTUAL_PMU_IRQ))); > > sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); > sysbus_connect_irq(gicbusdev, i + smp_cpus, You could also change the definition of ppibase not to add GIC_NR_SGIS (perhaps renaming it) and then you wouldn't need to use the PPI() macro here... -- PMM
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index bc89eb4806..3a4ea4dfdd 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -2,6 +2,7 @@ * ARM SBSA Reference Platform emulation * * Copyright (c) 2018 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. * Written by Hongbo Zhang <hongbo.zhang@linaro.org> * * This program is free software; you can redistribute it and/or modify it @@ -30,6 +31,7 @@ #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/arm/fdt.h" #include "hw/arm/smmuv3.h" #include "hw/block/flash.h" @@ -55,13 +57,6 @@ #define NUM_SMMU_IRQS 4 #define NUM_SATA_PORTS 6 -#define VIRTUAL_PMU_IRQ 7 -#define ARCH_GIC_MAINT_IRQ 9 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 - enum { SBSA_FLASH, SBSA_MEM, @@ -494,15 +489,19 @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(sms->gic, - ppibase + timer_irq[irq])); + ppibase + + PPI(timer_irq[irq]))); } qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase - + ARCH_GIC_MAINT_IRQ)); + qdev_get_gpio_in(sms->gic, + ppibase + + PPI(ARCH_GIC_MAINT_IRQ))); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase - + VIRTUAL_PMU_IRQ)); + qdev_get_gpio_in(sms->gic, + ppibase + + PPI(VIRTUAL_PMU_IRQ))); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); sysbus_connect_irq(gicbusdev, i + smp_cpus,
Use the private peripheral interrupt definitions from bsa.h instead of defining them locally. Refactor to use PPI() to convert from INTID macro where necessary. Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com> --- hw/arm/sbsa-ref.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)